TIA 5050 is a US standard with measurement methods and requirements for the receive volume control performance of both narrowband (NB) and wideband (WB) mobile handset phones. The measurements include conversational gain, frequency response, and distortion. Measurements are made at both 2N and 8N handset application forces, with different requirements applied to each. Either Free Field (FF) or Diffuse Field (DF) can be chosen as the Listener Reference Point (LRP) for receive frequency response.
This sequence tests to TIA 920-B, a comprehensive US dual-bandwidth standard that applies to both narrowband (NB) and wideband (WB) devices. It also allows a choice between Free Field (FF) and Diffuse Field (DF) as the Listener Reference Point (LRP). The current release of this sequence measures digital communications devices with handset features, according to TIA-920.110-B and speakerphones, according to TIA-920.120-B. Support for headset measurements, according to TIA-920.130-B will be added in a future release.
This module is a large structured set of sequences and subsequences which perform all the measurements. Curves and values are shown on the screen, tolerance checks are performed, and data is saved to Excel spreadsheet files. Completely prompted sequences for calibration of all the transducers are included. After a one-time setup with a sound card and other user-specific interfaces, the sequences are automatic. They run by simply selecting, pressing start, and following prompts where user interaction with the device under test is required. The sequence works with approved sound cards for connection to the transducers. Windows audio devices such as USB headsets work directly with SoundCheck®. VoIP softphones also work with SoundCheck, by means of a recommended third-party Windows audio application.
These two test sequences are designed to test the hearing aid compatibility of a telephone according to the TIA 1083 and FCC Part 68.316 standards. These sequences, which rely on the user having radial and axial HAC probes, play the appropriate test signals, measure the response and compare them to the limits in the standard. These pre-written sequences enable the user to immediately test to the relevant standards, and can be fully modified to meet any custom testing needs if desired.