This sequence measures an audio amplifier’s Frequency Response, Gain, THD, THD+Noise, and Self-noise. It accomplishes this by playing a 1/3rd octave sine sweep through the amplifier. A HarmonicTrak™ analysis step calculates the fundamental frequency response curve as well as the distortion plots. The sequence then records and analyzes a spectrum of the amplifier’s self-noise.
The principle is first to create a multitone stimulus waveform with SoundCheck and transfer it to the MP3 Player to be tested. This waveform is then played back, to be acquired and analyzed by SoundCheck. Both Left and Right channels are acquired at once. The acquisition is made easy by using a trigger on one input channel. The analysis is done by comparing the genuine stimulus and the play-back, using a cross-spectrum technique that provides the FRF, Cross-talk and Non-Coherent Distortion. The cross-talk between channels is measured by playing simultaneously two different multitones for Left and Right channels with interleaved frequencies, and making a cross-analysis between channels (e.g. finding in the right response the contribution of the left stimulus).
Due to inaccuracies of clock frequency, the play-back sampling rate is often different from the Soundcard recording sampling rate. Therefore, in SoundCheck, the recorded time Waveforms are frequency shifted as to obtain a perfect match between stimulus and responses. This frequency correction is performed on both channels before the Analysis steps. The exact playback sampling rate is displayed. The Sequence can be measure the MP3 player on the WAV or the MP3 file playback. The MP3 playback will yield a poorer FRF and more distortion, due to the lossy compression.
This test sequence demonstrates SoundCheck’s Triggered Record – Chirp Trigger function for open loop testing of devices without analog inputs such as smart speakers, wearables, smart home devices, tablets and cellphones. A stimulus WAV file is created in SoundCheck and transferred to the device under test, where it is played back and the response recorded in SoundCheck as if the stimulus were played directly from SoundCheck. The Acquisition step is triggered by the chirp in the stimulus file. Chirp triggers are more robust than level and frequency triggers which are susceptible to false triggering due to background noise.
This sequence allows you to test devices without an analog input such as smart speakers, tablets, cellphones and MP3 players using SoundCheck’s frequency-based trigger functionality. This method offers improved accuracy over previous level-based triggering, especially in noisy environments. A stimulus WAV file is created in SoundCheck, and copied to the device under test, where it is played and the response recorded in SoundCheck as if the stimulus were played directly from SoundCheck. The stimulus WAV file to be used on the device under test (DUT) may be customized in the stimulus step.
Note that this sequence uses the level-based trigger available in SoundCheck 16.1 and later. If you are using version 16.0 or earlier, please see the level-based trigger sequence.
This sequence allows you to test devices without an analog input such as tablets, cellphones and MP3 players. A stimulus WAV file is created in SoundCheck, and copied to the device under test, where it is played and the response recorded in SoundCheck as if the stimulus were played directly from SoundCheck. The stimulus WAV file to be used on the device under test (DUT) may be customized in the stimulus step.
Note that this sequence uses the level-based trigger available in SoundCheck 16.0 and earlier. If you are using version 16.1 or later, please see the frequency-trigger based sequence which takes advantage of new functionality to offer more robust triggering.
1-617-556-4104
LISTEN INC.
580 HARRISON AVE. SUITE 3W
BOSTON, MA 02118