Tag Archive for: active noise rejection

Microphone SNR Measurement (Background Noise Method)

This sequence characterizes a microphone’s ability to passively and/or actively reject noise in the user’s environment.  Unlike traditional microphone SNR measurements which calculate a ratio based upon a reference signal and the microphone’s noise floor, this method utilizes a signal (speech played from a mouth simulator) and noise (background noise played from two or more equalized source speakers) captured by both a reference microphone and the DUT microphone.

First a recording of the baseline ambient noise in the test environment is made and a 1/3 octave RTA spectrum is calculated from the recording. Next, the speech signal (mouth simulator) and noise signals (Left and Right speakers) are played consecutively and recorded separately using the reference microphone. A 1/3 octave RTA spectrum is calculated from each recorded time waveform. Next the same measurements are repeated using the DUT microphone. The resulting RTA spectra are then post processed to produce a signal gain spectrum and a noise gain spectrum which are then used to derive the SNR spectrum of the DUT mic. For best accuracy, the Signal and Noise spectra should be at least 5 dB above the ambient noise floor of the measurement environment.

More