Tag Archive for: analysis errors

Waveform Windowing


This sequence demonstrates how SoundCheck’s Windowing post-processing function is applied to waveforms to remove measurement artifacts that might otherwise create false auto delay values and subsequent analysis errors.

This sequence uses data from a customer who was measuring the directivity of a hearing aid-type device by mounting it on a rotating HATS and using a short duration log sweep. The DUT does not have a perfect seal in the HATS ear and the devices signal processing produces a latency of around 35ms. When viewing the Recorded Time waveforms, both the leakage signal and the amplified signal can be seen. As the DUT approaches 180° the magnitude of the leakage into the HATS ear exceeds that of the amplified signal, creating false Record Delay values and subsequent analysis errors. This sequence applies a window to the Recorded Time Waveform to remove the early-arrival leakage, and calculates the true Record Delay values of the amplified signal, obtaining consistent analysis results at all angles of rotation. This sequence can be adapted to your other requirements, for example, removing early arrival signals from a waveform or editing out excessive delay in a waveform.

More