Posts

Basic Loudspeaker Measurement Seminar

/in /by

Sept 30th, 2021. 9.00am and 2.00pm Eastern US time (6.00am and 11.00am West Coast time)

Join Les Quindipan and Anastassia Tolpygo on Sept 30th for a seminar on basic loudspeaker testing. This introductory seminar is aimed at anyone new to audio measurement, specifically loudspeaker testing. It will begin with an introduction to the basic design of a loudspeaker, including how a typical loudspeaker works. Various loudspeaker measurements will be explained, such as frequency response, distortion, sensitivity, phase/polarity and impedance, and how they might offer indications as to potential defects in a speaker. Typical test configurations for both R&D and end-of-line production test will be shown. A complete speaker test will be demonstrated, using SoundCheck and our free Loudspeaker complete test sequence. This will include setting up software and hardware, calibrating and configuring the test (e.g. setting pass/fail limits) and a discussion of the results. There is no charge for this seminar, but registration is required.

Note: We will be repeating this seminar in conjunction with our exclusive distributor in China, S&V Samford,  on Oct 13th. Register  for the China seminar if this timing suits you better or you prefer the slides translated into Chinese.

This event has already taken place. Check out our Youtube Channel for the recording.

Basic Loudspeaker Measurement Seminar (China) / 扬声器测试基础篇

/in /by

Oct 13th, 2021. 10.00am China Time / 2021 年 10 月 13 日上午 10 点（中国时间）

Join Les Quindipan and Anastassia Tolpygo on Oct 13th for a seminar on basic loudspeaker testing. This introductory seminar is aimed at anyone new to audio measurement, specifically loudspeaker testing. It will begin with an introduction to the basic design of a loudspeaker, including how a typical loudspeaker works. Various loudspeaker measurements will be explained, such as frequency response, distortion, sensitivity, phase/polarity and impedance, and how they might offer indications as to potential defects in a speaker. Typical test configurations for both R&D and end-of-line production test will be shown. A complete speaker test will be demonstrated, using SoundCheck and our free Loudspeaker complete test sequence. This will include setting up software and hardware, calibrating and configuring the test (e.g. setting pass/fail limits) and a discussion of the results. There is no charge for this seminar, but registration is required.

于10 月 13 日加入Les Quindipan 和 Anastassia Tolpygo主持的有关基础扬声器测试的研讨会吧。

此研讨会目的是向任何不熟悉音频测量的人介绍一下音频测量, 特别是扬声器测试。在研讨会中,首先会介绍扬声器的基本设计, 包括典型扬声器的工作原理。并将解释各种扬声器测量，例如频率响应、失真、灵敏度、相位/极性和阻抗, 以及扬声器测试如何提供有关扬声器潜在缺陷的指示。研讨会将展示用于研发和下线生产测试的典型测试配置。

在研讨会中将演示完整的扬声器测试。使用 SoundCheck 和我们免费的扬声器完整测试程序。这将包括设置软件和硬件、校准和配置测试（例如设置通过/失败限制）以及对结果的讨论。本次研讨会不收取任何费用，但需要预先报名。

This event has already taken place. Check out our Youtube Channel for the recording.