Production Testing Seminar China / 产線测试网络研讨会

loudspeaker production lineMay 18th 2022. 10am (China Time) / 2022年5月18日上午10点(中国时间)

In this short seminar, Les Quindipan explores the use of SoundCheck for end-of-line production testing. He discusses typical test configurations and the type of measurements that can be made, how to set pass/fail limits and how to optimize tests for high throughput.

He will also explain how SoundCheck is easily scaled for high volume production testing, with such features as external control via another program and auto-saving data to databases, and how SoundCheck’s capabilities are easily expanded through the use of custom steps to control all types of devices and test fixtures.

This seminar will be of interest to anyone considering a production line implementation of SoundCheck, or curious as to how to transition R&D measurements to fast and effective end-of-line test.

There is no charge for this seminar, but registration is required.

在这个简短的研讨会中,Les Quindipan将 与我们探讨如何使用 SoundCheck 进行生产线末端测试。 他会讨论典型的测试配置和可以进行的测量类型、如何设置通过/失败限制以及如何优化测试以实现高吞吐量。

他还会探讨SoundCheck 如何轻松扩展以进行大批量生产测试,具有通过另一个程序进行外部控制和自动将数据保存到数据库等功能,以及如何通过使用自定义步骤轻松扩展 SoundCheck 的功能来控制所有类型的 设备和测试夹具。

任何考虑在生产线中使用 SoundCheck 的人士,或想知道如何将研发测量转换为快速有效的生产线末端测试的人士都会对此研讨会感兴趣。


This event has passed. Watch the video.




Basic Loudspeaker Measurement Seminar (China) / 扬声器测试基础篇

Oct 13th, 2021. 10.00am China Time / 2021 年 10 月 13 日上午 10 点(中国时间)

Join Les Quindipan and Anastassia Tolpygo on Oct 13th for a seminar on basic loudspeaker testing. This introductory seminar is aimed at anyone new to audio measurement, specifically loudspeaker testing. It will begin with an introduction to the basic design of a loudspeaker, including how a typical loudspeaker works. Various loudspeaker measurements will be explained, such as frequency response, distortion, sensitivity, phase/polarity and impedance, and how they might offer indications as to potential defects in a speaker. Typical test configurations for both R&D and end-of-line production test will be shown. A complete speaker test will be demonstrated, using SoundCheck and our free Loudspeaker complete test sequence. This will include setting up software and hardware, calibrating and configuring the test (e.g. setting pass/fail limits) and a discussion of the results. There is no charge for this seminar, but registration is required.

于10 月 13 日加入Les Quindipan 和 Anastassia Tolpygo主持的有关基础扬声器测试的研讨会吧。

此研讨会目的是向任何不熟悉音频测量的人介绍一下音频测量, 特别是扬声器测试。在研讨会中,首先会介绍扬声器的基本设计, 包括典型扬声器的工作原理。并将解释各种扬声器测量,例如频率响应、失真、灵敏度、相位/极性和阻抗, 以及扬声器测试如何提供有关扬声器潜在缺陷的指示。研讨会将展示用于研发和下线生产测试的典型测试配置。

在研讨会中将演示完整的扬声器测试。使用 SoundCheck 和我们免费的扬声器完整测试程序。这将包括设置软件和硬件、校准和配置测试(例如设置通过/失败限制)以及对结果的讨论。本次研讨会不收取任何费用,但需要预先报名。

This event has already taken place. Check out our Youtube Channel for the recording.