Posts

Practical Measurement of Bluetooth and Lightning Headphones

/in /by

Author: Daniel Knighten.  Reprinted from the July 2017 issue of Voice Coil.

In this article, Dan Knighten discusses how to overcome the challenges of measuring headphones with wireless and digital interfaces such as Bluetooth, Lightning and USB-C to make the same measurements as on conventional wired headphones.

Full Article

 

Korea Headphone Seminar

/in , , , /by

Over 150 people attended the Listen, Inc./G.R.A.S. headphone seminar in Seoul on Tuesday March 6th, where Steve Temme, Peter Wulf-Andersen, Dr. Sean Olive and Prof. Lee spoke to a packed room about headphone measurement, perception and design and tuning. It was a great event and exciting to meet so many of Korea’s top audio design engineers. Thank you for coming! And of course a huge thank you to our very special guest speakers, Dr. Olive and Prof. Lee.

Videos of the event (in English and Korean) can be viewed using the links below (videos will open in a new tab).

Peter Wulf-Andersen – G.R.A.S.: https://youtu.be/sTZpShVDaoI

Steve Temme – Listen, Inc.: https://youtu.be/35TtshAENdo

Prof. Lee – New Media Communication Joint Institute of Seoul National University: https://youtu.be/mhLW03PvLmw

Dr. Sean Olive, Harman International: https://youtu.be/B8cNf0Q3tNs

Photo Gallery

Headphone & Headset Measurements – Tokyo, Japan – March 9, 2018

/in , /by

Presented by:

listen_gras_logos2

headphones

 

 

 

Due to popular demand, we are now holding our headphone testing seminar in Tokyo!

Learn about the latest in headphone test systems and methods from design to EOL Test. Industry experts Steve Temme (Listen, Inc.) and Peter Wulf-Andersen (G.R.A.S.), as well as guest speaker Dr. Sean Olive (Harman International) will discuss test equipment (ear couplers, test fixtures, test software and hardware) and demonstrate practical test setups for both R&D and QC headphone testing. It will cover in-ear monitors, Bluetooth, lightning/USB, noise-cancelling and high resolution headphones, in addition to conventional analog headphones. You can even measure your own headphone using our equipment in the hands-on session. Please see the full agenda below.

There is no charge for this one-day seminar. Lunch will be provided. Space is limited, so please RSVP today.

Location and Dates:

Tokyo: Friday March 9th, 2018. Otemachi SUNSKY ROOM 27th floor, room #B  Asahi Seimei Otemachi Bldg. 2-6-1 Otemachi, Chiyoda-Ku, Tokyo.

 

Print

 

 

See what people are saying about this event (we presented similar last year in the US)

Agenda (10am-4pm)

  • Introduction
  • Overview of Headphone Test Systems and tools
    • Traditional tools vs. modern consumer demands
      • Introduction to head and ear related terminology and definitions.
      • Historical perspective and background for the tools and standards used today.
      • Limitations vs. Possibilities in term of the measurement capabilities. How does that relate to the modern challenges with Bluetooth and ANC related testing tasks?
    • Tools for Next Generation Headphone Testing
      • Solutions to some the challenges addressed above.
      • Examples based on products and measurements.
    • What about frequencies above 20kHz? Science or marketing? Measurement Consistency – Development vs. Production
      • Progress in measurements from Head and Torso Simulator (KEMAR) to Production Test Fixture (45CC – flat plate). How the different components affect the measurements:
    • Software and hardware for headphone testing including typical headphone measurements and test setups
  • Practical examples of headphone measurements on.
    • Analog Headphones
    • Bluetooth Headsets
    • ANC Headphones
    • Lightning/USB Connected Headphones (using triggered recordings)
    • Hi-Res Headphones
    • In-ear monitors
  • Measurements including:
    • Frequency Response relative to a target response
    • Left/Right tracking
    • Impedance
    • Noise attenuation
    • Distortion including Non-Coherent Distortion
    • Standards including Max SPL EN-50332 & IEC-60268-7
  • Headphone Design: Perception and Measurement of Headphones – What is the Preferred Target Response? (Guest Speaker: Dr. Sean Olive, Harman International)
  • Hands-on testing: Bring your own device and test it using one of our measurement setups

Reserve your space

Headphone & Headset Measurements – Seoul, Korea – March 6, 2018

/in , , /by

Presented by:

listen_gras_logos2

 

headphones
Due to popular demand, we are now holding our headphone testing seminar in Seoul!

Learn about the latest in headphone test systems and methods from design to EOL Test. Industry experts Steve Temme (Listen, Inc.) and Peter Wulf-Andersen (G.R.A.S.), as well as guest speakers Dr. Sean Olive (Harman International) and Prof. Lee (New Media Communication Joint Institute of Seoul National University) will discuss test equipment (ear couplers, test fixtures, test software and hardware) and demonstrate practical test setups for both R&D and QC headphone testing. It will cover in-ear monitors, Bluetooth, lightning/USB, noise-cancelling and high resolution headphones, in addition to conventional analog headphones. You can even measure your own headphone using our equipment in the hands-on session. Please see the full agenda below.

There is no charge for this one-day seminar. Space is limited, so please RSVP today.

Location and Dates:

Seoul: Tuesday March 6th, 2018. Korea National University, 1 Gwanak-ro, Gwanak-gu, Seoul.

 

Print

 

 

See what people are saying about this event (we presented similar last year in the US)

Agenda (9am-4pm)

  • Introduction
  • Overview of Headphone Test Systems and tools
    • Traditional tools vs. modern consumer demands
      • Introduction to head and ear related terminology and definitions.
      • Historical perspective and background for the tools and standards used today.
      • Limitations vs. Possibilities in term of the measurement capabilities. How does that relate to the modern challenges with Bluetooth and ANC related testing tasks?
    • Tools for Next Generation Headphone Testing
      • Solutions to some the challenges addressed above.
      • Examples based on products and measurements.
    • What about frequencies above 20kHz? Science or marketing? Measurement Consistency – Development vs. Production
      • Progress in measurements from Head and Torso Simulator (KEMAR) to Production Test Fixture (45CC – flat plate). How the different components affect the measurements:
    • Software and hardware for headphone testing including typical headphone measurements and test setups
  • Practical examples of headphone measurements on.
    • Analog Headphones
    • Bluetooth Headsets
    • ANC Headphones
    • Lightning/USB Connected Headphones (using triggered recordings)
    • Hi-Res Headphones
    • In-ear monitors
  • Measurements including:
    • Frequency Response relative to a target response
    • Left/Right tracking
    • Impedance
    • Noise attenuation
    • Distortion including Non-Coherent Distortion
    • Standards including Max SPL EN-50332 & IEC-60268-7
  • Design & sound tuning of earphones  (Guest Speaker Prof. Lee, New Media Communication Joint Institute of Seoul National University)
  • Headphone Design: Perception and Measurement of Headphones – What is the Preferred Target Response? (Guest Speaker: Dr. Sean Olive, Harman International)
  • Hands-on testing: Bring your own device and test it using one of our measurement setups

Reserve your space