Tag Archive for: Impulsive distortion

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

We have a new automotive test sequence to measure Transient Distortion (also known as buzz, squeak, and rattle, Rub & Buzz, or impulsive distortion), Frequency Response, and Max SPL to the suggested measurement methods set out in the AES Technical Committee on Automotive Audio’s recently published white paper on in-car acoustic measurements. The three measurements are incorporated into one overall test sequence, making it fast and simple to run the entire suite of tests. This sequence facilitates evaluation of the committee’s proposals, and also serves as a basis for any similar in-house measurements. The white paper, which may be obtained from the TC-AA, outlines both measurement methods and physical configuration such as microphone and seat positioning in an effort to simplify comparison between vehicles.

More

In-Car Audio Measurements

Screenshot showing in-car audio measurement sequence final display showing frequency response, distortion and Max SPL

Final display of in-car audio measurement sequence showing frequency response, distortion and Max SPL

This in-car audio test sequence measures the transient distortion (also known as buzz, squeak, and rattle, Rub & Buzz, or impulsive distortion), frequency response, and maximum sound pressure level of a vehicle infotainment system to the methods outlined in the Audio Engineering Society Technical Committee on Automotive Audio (TC-AA) in-vehicle measurements draft white paper.  The three measurements are incorporated into one overall test sequence, making it fast and simple to run the entire suite of tests. This sequence facilitates evaluation of the committee’s proposals, and also serves as a basis for any similar in-house measurements. The white paper (linked above) outlines both measurement methods and physical configuration such as microphone and seat positioning in an effort to simplify comparison between vehicles. This test sequence may, of course, be used with your own in-house physical configuration if adherence to the TC-AA guidelines is not essential.

More