Posts

Receive Loudness Rating with ITU Real Speech Test Sequence

The purpose of this sequence is to measure the Receive Loudness Rating (RLR) following the ITU-T P.79 standard using a Head and Torso Simulator (HATS). First, real speech from the ITU-T P.501 standard is sent to the Device Under Test (DUT) speaker by an electrical interface. The HATS right ear captures the DUT‟s speaker response. SoundCheck calculates the frequency response and then RLR based on that recording.

More

Send Loudness Rating with ITU Real Speech Test Sequence

The purpose of this sequence is to measure the Send Loudness Rating (SLR) following the ITU-T P.79 standard. This sequence can be used with handsets, headsets, and conference call devices. First, real speech from the ITU-T P.501 standard is played out of a mouth simulator. The Device Under Test (DUT) microphone then captures the signal and transmits this back to SoundCheck. SoundCheck calculates the frequency response function in 1/3 octaves and calculates SLR based on that frequency response.

More