Posts

蓝牙音频测试 / Bluetooth Testing Seminar

June 3rd 2021. 10am (China Time)

This seminar has now passed, but you can watch the video.

In this 1hr online seminar, S&V Samford presents Les Quindipan of Listen, Inc. and Kristopher Hett of Portland Tool & Die demonstrating how to test Bluetooth devices.

Kris Hett will introduce the Portland Tool & Die Bluetooth interfaces that are used to connect the device under test to the measurement system. He will discuss the technical specifications, and explain the differences between these and other types of Bluetooth interfaces. Les Quindipan will then demonstrate how these have been fully integrated into SoundCheck for simple plug and play operation, and how they can be used in test sequences. He will also highlight some of the algorithms included in SoundCheck that overcome Bluetooth-induced time delays, thus enabling these devices to be tested in a similar way to their wired counterparts. A complete test on a Bluetooth speaker and a Bluetooth Headset will be demonstrated.

There is no charge for this seminar, but registration is required.

 

2021年6月3日,上午10点(中国时间)

在这1小时的在线研讨会中,声振环保仪器有限公司, Listen,Inc. 的Les Quindipan以及Portland Tool&Die的Kristopher Hett,会向大家演示如何测试蓝牙设备。

届时Kris Hett会介绍Portland Tool&Die蓝牙接口,该接口用于连接戴测试至测量系统。他将会讨论技术规范,并解释这些和其他类型的蓝牙接口之间的区别。

Les Quindipan将演示如何将它们完全集成到SoundCheck中以进行简单即插即用的操作,以及如何将它们用于测试程序中。他还会重点介绍SoundCheck的一些算法,这些算法可以克服蓝牙引起的时间延迟,从而使这些设备能够使用与有线等同类产品类似的方式进行测试。除此之外还会演示蓝牙扬声器和蓝牙耳机的完整测试。

该研讨会不收取任何费用,但需要注册。

 

Bluetooth Device Measurement Seminar

This event has already taken place, but you can view the recording here.

 

May 27th, 2021. 9.00am and 2.00pm Eastern US time (6.00am and 11.00am West Coast time)

In this 1hr online seminar, Les Quindipan of Listen, Inc. and Kristopher Hett of Portland Tool & Die demonstrate how to test Bluetooth devices.

Kris Hett will introduce the Portland Tool & Die Bluetooth interfaces that are used to connect the device under test to the measurement system. He will discuss the technical specifications, and explain the differences between these and other types of Bluetooth interfaces. Les Quindipan will then demonstrate how these have been fully integrated into SoundCheck for simple plug and play operation, and how they can be used in test sequences. He will also highlight some of the algorithms included in SoundCheck that overcome Bluetooth-induced time delays, thus enabling these devices to be tested in a similar way to their wired counterparts. A complete test on a Bluetooth speaker and a Bluetooth Headset will be demonstrated.

There is no charge for this seminar, but registration is required.

Note: We are repeating this seminar in conjunction with our exclusive distributor in China, S&V Samford,  on June 3rd at 10.00am China time. Please register for this seminar instead if this timing suits you better or you prefer the slides translated into Chinese.

Advanced Microphone Measurement Seminar / 麦克风测试进阶篇网络研讨会

April 14, 2021. 9.30am (China time)

In this 120 minute online seminar, S&V Samford presents Listen’s Technical Support Manager, Steve Tatarunis, discussing some of the more advanced aspects of microphone testing including:

  • Substitution, Equalized Source and Transfer Function sequences in SoundCheck, including how to calibrate for these measurements. This is an expansion of material covered in the ‘basic microphone testing webinar’ and include more details about the sequences and calibration and the trade-offs of each method.
  • Advanced measurements including polar plot, phase, self-noise, signal to noise, distortion, active/passive noise rejection
  • Open loop microphone testing for voice activated devices such as smart speakers, automotive audio etc.
  • Advanced hardware and test configurations for measuring microphone arrays and MEMS devices

There is no charge for this seminar, but registration is required.

 

中国时间2021年4月14日 星期三上午9.30点

在这个120分钟的在线研讨会中,声振环保仪器有限公司以及Listen,Inc.技术支持经理Steve Tatarunis,会与大家探讨麦克风测量进阶的知识, 包括:

  • SoundCheck中的对比测试法、均衡音源和传递函数程序,包括如何校准这些测量。 这是“基础麦克风测试网络研讨会”涵盖的内容的扩展,并包括有关程序、校准以及每种方法取舍的详细信息。
  • 进阶测量,包括极坐标图、相位、底噪、信噪比、失真,主动/被动噪声抑制
  • 对语音激活设备(例如智能扬声器,汽车音频等)的开环麦克风测试
  • 语音激活设备的开环麦克风测试(例如智能扬声器,汽车音频等)。
  • 用于测量麦克风阵列和MEMS的进阶硬件和测试配置

是次研讨会不收取任何费用,但需要提前注册。

Advanced Headphone Measurement

October 22, 2020. 10am China time

Low cost production headphone test system

In this 60 minute online seminar, S&V Samford presents Listen, Inc. founder and president, Steve Temme discussing Advanced Headphone Measurements.

Listen, Inc’s SoundCheck electroacoustic test system has always been a popular system for testing headphones, and is used on hundreds of production lines in China as well as R&D labs worldwide. In this online seminar, we will discuss recent developments in headphone technology and how to measure accordingly, including:

  • Measurement Standards e.g. IEC 60268-7
  • Measuring USB and Bluetooth headsets including True Wireless Stereo (TWS) headphones/headsets
  • Measuring headphone and headset microphones (including Send performance)
  • Measuring Active Noise Cancellation (ANC)
  • Voice activation and Open Loop measurements
  • Distortion measurement methods including Non-coherent Distortion
  • Measurement considerations for AR & Hi-Res

The presentation will be in English, but slides will be in English and Chinese.

There is no charge for this seminar, but registration is required. Please sign up below.

 

耳机测量进阶篇网络研讨会

中国时间2020年10月22日 星期四上午10点

在这个60分钟的在线研讨会中,声振环保仪器有限公司以及Listen,Inc.创始人兼总裁Steve Temme,会与大家探讨进阶耳机量测。

Listen公司的SoundCheck电声测试系统一直是测试耳机的流行系统已在中国数百条生产线以及全球的研发实验室中使用。在此在线研讨会上,我们将讨论耳机技术的最新发展以及如何进行相应的测量,包括:

  • 测量标准,例如IEC 60268-7
  • 测量USB和Bluetooth耳机,包括True Wireless Stereo(TWS)耳机/耳
  • 测量耳机和头戴式麦克风(包括发送性能)
  • 测量主动降噪 (ANC)
  • 语音激活和开环测量
  • 失真测量方法,包括非相干失真
  • 扩增实境耳机(AR)和HI-Res耳机的测量注意事项

这次研讨会将会以英文进行,演示文稿将以中英文显示。

不收取任何费用,但是需要提前注册。请在下面注册。