Posts

SoundCheck Online Basic Training, May 2023

Registration is now open for our Online SoundCheck Basic Training class from May 9th-18th.

The course will again consist of 6 x 2-hour sessions over a 2 week time period, and will cover all the same content as our standard in-person basic training course. Each session is led by a live trainer and will include instruction, demos, quizzes, breakout sessions and discussion. Hands-on exercises will be provided to be completed between sessions and reviewed in subsequent classes.

We are restricting attendance to 30 attendees to better facilitate breakout sessions, so sign up early to secure your spot. Registration closes on May 1st, and a 10% early booking discount will apply to all registrations received by April 17th.

Dates: May 9th, 10th, 11th, 16th, 17th, 18th

Time: 6 x 2hr sessions from 11.00am-1.00pm Eastern US Time (8.00am-10.00am Western US Time)

Attendees must attend all 6 sessions to complete the course.

Cost: $295 ($195 for support contract holders). Additional discounts for multiple people from the same company signing up together (2-3 people: 10%; 4 people: 15%; 5+ people: 25%). Additional 5% early bird discount when signing up prior to April 17th.

Instructors: Mark Latshaw and Pranav Swaroop

Course Outline

Session 1: Hardware & Calibration – Configuring audio interfaces and external equipment; certified audio interfaces; Calibration of different DUT types (telephones, speakers, etc.)

Session 2: Memory list, Data management, Virtual Instruments (Spectrum Analyzer, RTA, Multi-meter, Signal Generator, Oscilloscope), Sequence Editor Basics

Session 3: Sequence Writing Part 1 – Introduction to the sequence editor; stimulus; acquisition; basic analysis

Session 4: Sequence Writing Part 2 – Limits; Displays; Autosave; Recall; Printing

Session 5: Sequence Writing Part 3 – Messages & sequence logic; Post Processing; Statistics

Session 6: Sequence Writing Part 4 – Sequence Writing Examples

 

Group discounts are available for multiple attendees from the same company:

2-3 attendees: 10% discount

4 attendees: 15% discount

5+ attendees: 25% discount

 

Early bird discount: 10% until April 17th.

Register Now

 

Note about late signups: As training starts imminently, we do not have time to ship demo keys. This means that in order to participate fully, you must have a relatively up-to-date (version 20 or 21) hardware key available to use. If you do not, you can still follow along with the training in demo mode, but you will be unable to complete some of the hands-on exercises.

SoundCheck Online Basic Training, October 2022

Registration is now open for our Online SoundCheck Basic Training class from October 4th-13th.

The course will again consist of 6 x 2-hour sessions over a 2 week time period, and will cover all the same content as our standard in-person basic training course. Each session is led by a live trainer and will include instruction, demos, quizzes, breakout sessions and discussion. Hands-on exercises will be provided to be completed between sessions and reviewed in subsequent classes

We are restricting attendance to 30 attendees to better facilitate breakout sessions, so sign up early to secure your spot. Registration closes on September 26th, and a 10% early booking discount will apply to all registrations received by September 15th.

Dates: October 4th, 5th, 6th, 11th, 12th 13th.

Time: 6 x 2hr sessions from 11.00am-1.00pm Eastern US Time (8.00am-10.00am Western US Time)

Attendees must attend all 6 sessions to complete the course.

Cost: $295 ($195 for support contract holders). Additional discounts for multiple people from the same company signing up together (2-3 people: 10%; 4 people: 15%; 5+ people: 25%). Additional 5% early bird discount when signing up prior to September 15th.

Instructors: Mark Latshaw and Pranav Swaroop

 

Course Outline

Session 1: Hardware & Calibration – configuring audio interfaces and external equipment; certified audio interfaces; Calibration of different DUT types (telephones, speakers, etc.)

Session 2: Memory list, Data management, Virtual Instruments (Spectrum Analyzer, RTA, Multi-meter, Signal Generator, Oscilloscope), Sequence Editor Basics

Session 3: Sequence Writing Part 1 – introduction to the sequence wizard; stimulus; acquisition; basic analysis; limits

Session 4: Sequence Writing Part 2 – Displays; Autosave; Recall; Printing

Session 5: Sequence Writing Part 3 – Messages & sequence logic; external control; sequence & step parameters

Session 6: Advanced Sequence Development – Post Processing; Statistics

 

Group discounts are available for multiple attendees from the same company:

2-3 attendees: 10% discount

4 attendees: 15% discount

5+ attendees: 25% discount

 

Early bird discount: 10% until Sept 15.

Register Now

 

We are also running Advanced Training, November 15-17th. Learn more.

SoundCheck Online Basic Training, April 2022

Registration is now open for our Online SoundCheck Basic Training class from April 19th-28th.

The course will again consist of 6 x 2-hour sessions over a 2 week time period, and will cover all the same content as our standard in-person basic training course. Each session is led by a live trainer and will include instruction, demos, quizzes, breakout sessions and discussion. Hands-on exercises will be provided to be completed between sessions and reviewed in subsequent classes

We are restricting attendance to 30 attendees to better facilitate breakout sessions, so sign up early to secure your spot. Registration closes on April 8th, and a 5% early booking discount will apply to all registrations received by March 18th.

Dates: April 19th, 20th, 21st, 26th, 27th 28th.

Time: 6 x 2hr sessions from 11.00am-1.00pm Eastern US Time (8.00am-10.00am Western US Time)

Attendees must attend all 6 sessions to complete the course.

Cost: $295 ($195 for support contract holders). Additional discounts for multiple people from the same company signing up together (2-3 people: 10%; 4 people: 15%; 5+ people: 25%). Additional 5% early bird discount when signing up prior to March 18th.

Instructors: Mark Latshaw and Pranav Swaroop

 

Course Outline

Session 1: Hardware & Calibration – configuring audio interfaces and external equipment; certified audio interfaces; Calibration of different DUT types (telephones, speakers, etc.)

Session 2: Memory list, Data management, Virtual Instruments (Spectrum Analyzer, RTA, Multi-meter, Signal Generator, Oscilloscope), Sequence Editor Basics

Session 3: Sequence Writing Part 1 – introduction to the sequence wizard; stimulus; acquisition; basic analysis; limits

Session 4: Sequence Writing Part 2 – Displays; Autosave; Recall; Printing

Session 5: Sequence Writing Part 3 – Messages & sequence logic; external control; sequence & step parameters

Session 6: Advanced Sequence Development – Post Processing; Statistics

 

Registration is now CLOSED as we are past the date by which we can send out necessary equipment for use during the training. Late sign-ups will only be accepted from users who have an up-to-date, reasonably fully-functioned SoundCheck system available to use for the training. Please contact your sales engineer for advice and to request a sign-up link.

 

 

Basic Soundcheck Training Online – Oct/Nov 2021

SoundCheck Basic Training is in an all-new online format for 2021. We have taken the material from our popular 2-day Basic SoundCheck training course and re-formatted it into 6 x 2 hr online sessions. Each session, led by a live trainer, will include instruction, demos, quizzes, breakout sessions and discussion. Hands-on exercises will be provided to be completed between sessions and reviewed in subsequent classes.

Dates: Oct 25th, 26th, 27th and Nov 1st, 2nd, 3rd

Time: 6 x 2hr sessions from 11.00am-1.00pm Eastern US Time (8.00am-10.00am Western US Time)

Attendees must attend all 6 sessions to complete the course.

Cost: $295 ($195 for support contract holders). Additional discounts for multiple people from the same company signing up together (2-3 people: 10%; 4 people: 15%; 5+ people: 25%).

Instructors: Mark Latshaw and Cam Ruffle-Deignan

 

Course Outline

Session 1: Hardware & Calibration – configuring audio interfaces and external equipment; certified audio interfaces; Calibration of different DUT types (telephones, speakers, etc.)

Session 2: Memory list, Data management, Virtual Instruments (Spectrum Analyzer, RTA, Multi-meter, Signal Generator, Oscilloscope), Sequence Editor Basics

Session 3: Sequence Writing Part 1 – introduction to the sequence wizard; stimulus; acquisition; basic analysis; limits

Session 4: Sequence Writing Part 2 – Displays; Autosave; Recall; Printing

Session 5: Sequence Writing Part 3 – Messages & sequence logic; external control; sequence & step parameters

Session 6: Advanced Sequence Development – Post Processing; Statistics

 

Thank you to all who attended. Please contact support@listeninc.com if you have any follow-up questions.

 

 

Online Training: Basic Sequence Writing (European Schedule)

Sept 23 at 3pm Central European Time, 2pm UK time, 9am US (East Coast) time [Note: rescheduled from original date of Sept 8th]

The ability to quickly generate test sequences is one of the most powerful SoundCheck skills you can acquire. We are bringing a 2 hour basic sequence writing course to the comfort of your own home with our new online training at a convenient time for our European customers.

This 2 hour course is a condensed version of the basics of sequence writing from our popular 2 day training class. We will start from the beginning, explaining how to determine the test parameters and hardware that will meet your specific test requirements. We will look at best practices for creating a sequence, and finally we will assemble a sequence from scratch. This course is ideal for novice SoundCheck users, or those who have been using SoundCheck with sequences that others have written and who are ready to start developing their own. This training is free to support contract holders and US $79 for others.

Register Now

Online Training: Basic Sequences

The ability to quickly generate test sequences is one of the most powerful SoundCheck skills you can acquire. We are bringing a 2 hour basic sequence writing course to the comfort of your own home with our new online training.
This 2 hour course is a condensed version of the basics of sequence writing from our popular 2 day training class. We will start from the beginning, explaining how to determine the test parameters and hardware that will meet your specific test requirements. We will look at best practices for creating a sequence, and finally we will assemble a sequence from scratch. This course is ideal for novice SoundCheck users, or those who have been using SoundCheck with sequences that others have written and who are ready to start developing their own. This training is free to support contract holders and $79 for others.

Register Now

Remote Training

Due to the current COVID-19 situation, we are not offering in-person group training classes. These will be resumed when regulations allow and there is the demand for it.

In the meantime, we offer customized online training for groups of people from the same company, and can offer flexibility in timing, session length and schedule. Please contact your sales engineer for more information.

Additionally, we will shortly be announcing some scheduled online training classes and these will be posted here as soon as information is available.

 

Don’t forget to check out our collection of Working from Home with SoundCheck videos on our Youtube channel. Our support team has created this series of videos that demonstrate features of SoundCheck that can easily be explored offline without full access to your lab.

If you are a new user, our series of on-demand training videos is a good place to start. These cover much of the content from day 1 of our basic 2 day training.