Lightning Headphone Test (Open Loop Test)
This sequence tests a stereo headphone connected to a portable audio device such as a mobile phone or MP3 player. It is particularly useful for testing headphones with proprietary connectors such as the Lightning connector which otherwise can’t be tested in a conventional “closed loop” test configuration.
The test stimulus is created in SoundCheck, saved as a WAV file and loaded on to the portable device for playback. Both left and right earphones are measured simultaneously using a continuous log sweep from 20 Hz to 20 kHz. The sequence uses a short 1 kHz tone, pre-pended to the normal test stimulus to automatically trigger the test when playback of the test signal begins; it also serves as reference tone for any frequency shift calculations. Post-processing precisely synchronizes the stimulus and response waveforms, and then calculation of the measurement parameters proceeds as with any conventional headphone. In this case, analysis is performed using the Time Selective Response (TSR) algorithm which performs THD and fundamental frequency response analysis simultaneously in addition to producing an impulse response. The fundamentals are then post processed to derive the sensitivity of the left and right channels at 1 kHz.