Tag Archive for: sequence loudspeaker

Enhanced Perceptual Rub & Buzz Demo Sequence

This sequence demonstrates how SC20’s new enhanced Perceptual Rub & Buzz algorithm compares to normalized Rub & Buzz and subjective listening. Running this sequence on a batch of good and bad buzzing loudspeakers should help identify by measurement, audibly defective units and where to set production limits. Starting the sequence, the user is asked at what test level to play a stepped sine sweep (Stweep™) in 1/12th octaves, from 20 kHz to 50 Hz. The user is encouraged to try different test levels and change sweep parameters to find the optimum settings to catch buzzing loudspeakers. The loudspeaker is measured via two channels of the audio interface. A calibrated reference microphone is connected to one of the channels and an impedance reference built into the SC Amp or AmpConnect is connected to the other. A HarmonicTrak™ Analysis step analyzes the recorded waveform from the reference microphone, and displays both the enhanced Perceptual Rub & Buzz and normalized Rub & Buzz graphs.

More