Posts

Triggered Record Using Chirp Trigger and WAV File (Version 17 and later)

/in , , , , , /by

This test sequence demonstrates SoundCheck’s Triggered Record – Chirp Trigger function for open loop testing of devices without analog inputs such as smart speakers, wearables, smart home devices, tablets and cellphones.  A stimulus WAV file is created in SoundCheck and transferred to the device under test, where it is played back and the response recorded in SoundCheck as if the stimulus were played directly from SoundCheck. The Acquisition step is triggered by the chirp in the stimulus file. Chirp triggers are more robust than level and frequency triggers which are susceptible to false triggering due to background noise.

More

Challenges of IoT Smart Speaker Testing

/in /by

Quantitatively measuring the audio characteristics of IoT (Internet of Things) smart speakers presents several novel challenges. We discuss overcoming the practical challenges of testing such devices and demonstrate how to measure frequency response, distortion, and other common audio characteristics. In order to make these measurements, several measurement techniques and algorithms are presented that allow us to move past the practical difficulties presented by this class of emerging audio devices. We discuss test equipment requirements, selection of test signals and especially overcoming the challenges around injecting and extracting test signals from the device.

Authors: Glenn Hess (Indy Acoustic Research) and Daniel Knighten (Listen, Inc.)
Presented at the 143rd AES Conference, New York 2017

Full Paper

Triggered Record Using WAV File (Version 16.0 and earlier)

/in , /by

triggered_record_screenshotThis sequence allows you to test devices without an analog input such as tablets, cellphones and MP3 players. A stimulus WAV file is created in SoundCheck, and copied to the device under test, where it is played and the response recorded in SoundCheck as if the stimulus were played directly from SoundCheck. The stimulus WAV file to be used on the device under test (DUT) may be customized in the stimulus step.

Note that this sequence uses the level-based trigger available in SoundCheck 16.0 and earlier. If you are using version 16.1 or later, please see the frequency-trigger based sequence which takes advantage of new functionality to offer more robust triggering.

More