Posts

Huge Discounts on SoundCheck 21 Upgrades!

For a limited time we are offering deep discounts on a system upgrade to enable you to get up to date with the latest version of SoundCheck. The upgrade offer is a simple flat rate: $4,175 for owners of SoundCheck 15 or 16, $3,402 for owners of version 17, $2,646 for owners of versions 18 and 19, and $1,465 for owners of version 20. All the modules on your present system will be included. Promotional pricing is valid till June 30th, 2023.

When you upgrade to the latest version of SoundCheck, the license is perpetual – in other words, you keep all the new features you have acquired for ever (or until you decide to upgrade to an even newer version).  Please ask us if you have any questions about upgrade licensing!

SoundCheck® 21 offers new features for both R&D and Production, as well as many usability upgrades including:

  • Enhanced Loose Particle Detection: A new enhanced Loose Particle detection algorithm for measurement of transient distortion is more accurate and offers improved correlation to subjective listening. In addition to identifying distortion caused by foreign material in the voice coil gap of a speaker, it is also valuable for detecting rattling buttons on smart devices and Bluetooth speakers, and identifying buzz, squeak and rattle in automotive audio applications.
  • Multichannel Spectrum Analyzer: A new multi-channel FFT analyzer replaces SoundCheck’s original single channel spectrum analyzer. This high resolution constant bandwidth linear filter analyzer enables any number of live FFT spectra to be simultaneously viewed in real time on the same graph.
  • Metadata for Simplified Data Collection and Recall: SoundCheck’s new Metadata feature simplifies data collection and documentation. Curves, values, results and waveforms can now be saved to a single TDMS file, along with all test parameters acquired during the sequence run such as test conditions, test sequence used, operator, serial number, microphone position, data entered via a message step and more.
  • Sequence Protection: Sequence protection guards your intellectual property and adds an additional level of assurance that your tests are run as-intended by your production facility or contract manufacturer. Any test sequence can now be locked and password protected before distribution. This prevents sequence steps and limits from editing and sequence steps cannot even be viewed, protecting the intellectual property in your sequences.
  • AudioConnect 2 Support: SoundCheck 21 supports AudioConnect 2TM, Listen’s new portable, compact and high resolution (up to 192 kHz) dual-channel audio interface. AudioConnect 2 is designed for measurements anywhere from the production line to out in the field.

Upgrade from Version

Upgrade List Price

Promotional Upgrade Price

Discount

15

$9,450

$4,175

56%

16

$7,875

$4,175

47%

17

$6,300

$3,402

46%

18

$4,725

$2,646

44%

19

$3,150

$2,646

16%

20

$1,575

$1,465

7%

If you are using a version prior to version 15, please contact your sales engineer for discounted price information.

PLEASE NOTE:

  • Versions of SoundCheck prior to 16 are no longer supported. We highly recommend that you take advantage of this limited time offer to upgrade your systems to the latest version. Please contact your sales engineer to discuss additional multi-system upgrade discounts.
  • If you have multiple systems with different purchase dates, we are happy to work with you to get them all upgraded to the latest version and onto the same annual support contract cycle.
  • You can also reduce your future upgrade costs by purchasing an annual support contract for an additional $998. With this, you will receive SoundCheck 22 when it is released at no extra charge, as well as priority support service.
  • Discounted upgrade prices are only available to registered owner of software, for their exclusive use.

Please note that these prices are applicable to the US only. Users outside the US should contact Listen or their local representative for pricing information.

Please email your purchase order to sales@listeninc.com. You can also contact us on this email address if you would like to pay by credit card, have any questions, or need additional paperwork to support your order.

Please also see the detailed information on new features.

request_quote

SoundCheck 18 New Features Video

In this short video, sales engineer Les Quindipan gives a brief overview and demonstration of the new usability enhancements and features to simplify automation, multi-channel and voice controlled testing in SoundCheck 18. New features previewed include:

  • Automation Enhancements: Test configuration data can now be passed into SoundCheck from external programs using TCP/IP commands.  By externally storing parameters such as limits, test levels, and test signals, a single sequence can be used for multiple products, simplifying the number of sequences that a large organi­zation needs to maintain, and reducing test configuration time.
  • Plug’n’play hardware setup: Listen and Portland Tool & Die Hard­ware now auto-configure parameters such as sampling rate and calibration values, and create input and output signal paths, making setup faster.
  • Simplified Gain Control Selection: auto read and auto range gain settings are now easily accessible as drop-down options in the gain menu in the acquisition step editor, and auto-read is available in virtual instruments. This makes it much faster to make quick gain adjustments while developing sequences.
  • Improved sampling rate management:  Improved communication with audio interfaces that have a sampling-rate dependent latency enables you to now specify the latencies for various sampling rates, either by entering them manually or importing from a file, and SoundCheck will automatically default to these. Sampling  rate can also now be set in the stimulus editor.
  • MEMS interface control: Portland Tool & Die MEMS microphone interfaces can now be fully controlled from within SoundCheck for faster measurement setup and greater measurement reliability as the device settings can be built into the test sequence.
  • TEDS Support: When used with compatible Listen hardware, SoundCheck will automatically identify, configure and calibrate TEDS microphones and accelerometers, saving time on initial hardware setup and whenever hardware is changed.
  • WASAPI driver support: WASAPI driver support in Windows 10 offers improved multichannel capabilities.

Play Video

SoundCheck 17 Discounted Upgrade Pricing

For a limited time we are offering deep discounts on a system upgrade to enable you to get up to date with the latest version of SoundCheck. The upgrade offer is a simple flat rate: $3,950 for owners of SoundCheck 11 or 12, $3,250 for owners of version 13, $2,500 for owners of versions 14 through 15, and $1,395 for owners of version 16. All the modules on your present system will be included.

SoundCheckTM 17’s feature-packed release offers many features to simplify multi-channel and voice controlled testing, as well as many usability upgrades including:

  • Improved color pallets for ultimate flexibility in defining colors for backgrounds, grids, cursors and graph lines.
  • Save to MATLAB –  All data including memory list curves and Soundmap (time frequency analysis) data can now be saved to MATLAB for additional processing. Data is saved as a standard MAT file and can be manually or automatically saved in this format.
  • A new Level & Cross-Correlation Trigger (requires optional module 2006 – Time Selective Response) for improved performance for open loop measurements
  • An enhanced database (optional module) is now 4x faster and 3x more space-efficient than previous versions, making it an extremely powerful data management tool for customers testing modern audio products with multiple transducers (microphone arrays, multiple speakers, etc.), as these frequently generate large volumes of data.
  • SoundCheck can now read multichannel WAV files directly from the memory list, signal generator and stimulus steps, simplifying the testing of multichannel devices such as microphone or speaker arrays
  • SoundCheck can now control multiple DC Connects which can be configured independently
  • A new Average Curve/WFM post processing function allows you to obtain the average curve (or waveform) of a selected group of data in the Memory List.
  • SoundCheck now supports the new APTX HD codec for high resolution Bluetooth testing
  • A 64 bit demo / data viewer replaces the 32 bit demo version. When the software key is not installed, previously measured data can still be recalled and viewed.
  • CSV formatted files can be recalled in addition to TXT files.

Call your sales engineer today to receive a quote for upgrading all your SoundCheck systems. These discounted rates have been extended until June 7th, 2019 but will not be available after that, so please get your order in soon!

SoundCheck 17 Discounted Upgrade Pricing
Upgrade from VersionUpgrade List PricePromotional Upgrade PriceDiscount
11.0$9,000$3,95056%
12.0$7,500$3,95047%
13.0$6,000$3,25046%
14.0$4,500$2,50044%
15.0$3,000$2,50016%
16.0$1,500$1,3957%

If you are using a version prior to version 11, please contact your sales engineer for discounted price information.

PLEASE NOTE:

  • Effective Jan 01, 2018, versions of SoundCheck prior to version 13 will no longer be supported. We highly recommend that you take advantage of this limited time offer to upgrade your systems to version 17. Please contact your sales engineer to discuss additional multi-system upgrade discounts.
  • If you have multiple systems with different purchase dates, we are happy to work with you to get them all upgraded to the latest version and onto the same annual support contract cycle.
  • You can also reduce your future upgrade costs by purchasing an annual support contract for an additional $950. With this, you will receive SoundCheck 18 when it is released at no extra charge, as well as priority support service.

Please note that these prices are applicable to the US only. Users outside the US should contact Listen or their local representative for pricing information.

Please fax your purchase order to 617-556-4145 or email it to sales@listeninc.com, or contact us on this email address if you would like to pay by credit card, have any questions, or need additional paperwork to support your order.

Please also see the detailed information on new features.

request_quote