Posts

Advanced Sequence Development

Expand the capabilities of your test sequences by learning how to implement advanced functions such as conditional branching, looping, and sub-sequencing. Presented by Brian Fallon, Listen, Inc. Status: Recorded. Watch Webinar

 

Post Processing – part 2

Learn how to use the new post-processing modules introduced in SoundCheck 10 and SoundCheck 11 – waveform filter, Zwicker loudness and active speech. Presented by Steve Temme, Listen, Inc. Status: Recorded. Watch Webinar

 

Limits

In this webinar, we take an in-depth look at the limits editor’s settings and how to create limits for various types of data including curves and single values. Presented by Amandio Neves, Listen, Inc. Status: Recorded. Watch Webinar

 

Analysis with Batch Processing

Learn how to use the Analysis options in SoundCheck! We examine the analysis algorithms and how to configure their steps to measure frequency response, distortion, impedance, and more. This webinar will also cover how to use the batch processing feature first introduced in SoundCheck 11. Presented by Steve Temme, Listen, Inc. Status: Recorded. Watch Webinar

 

Stimulus and Acquisition

An overview of how to use the various stimuli in SoundCheck including the stimulus types, parameter configuration, and implementation via acquisition steps. Presented by Brian Fallon, Listen, Inc. Status: Recorded. Watch Webinar

 

Virtual Instruments

Learn how to setup and use the various real time instruments available in SoundCheck, including: Signal Generator, Multimeter, Spectrum Analyzer, Oscilloscope, Real Time Analyzer (RTA). Presented by Brian Fallon, Listen, Inc. Status: Recorded. Watch Webinar

 

Calibration

In this webinar, we detail the process for calibrating each component of the test chain, including: reference microphones, mouth simulators, artificial ears, amplifiers, and more. It will cover the new expanded system-wide calibration setup first introduced in SoundCheck 11. Presented by Brian Fallon, SoundCheck Product Manager. Status: Recorded. Watch Webinar

 

Hardware

A detailed overview of the settings in the SoundCheck hardware editor and how they relate to your specific devices, covering soundcard, digital I/O, RS-232, IEEE, and DC Connect device settings, as well as the system-wide hardware setup, newly introduced in SoundCheck11. Presented by Amandio Neves, Listen, Inc. Status: Recorded. Watch Webinar