Third Party Audio Interfaces
3rd party professional audio interfaces often offer a lower cost per channel than dedicated audio measurement interfaces, especially for high channel counts. When carefully selected and correctly calibrated they can be an excellent way of minimizing test system cost. The SoundCheck software includes all the tools you need for accurate interface evaluation, signal path calibration and latency accommodation.
Listen sells 3rd party audio interfaces from RME and Lynx. These have been thoroughly verified for use with SoundCheck. When you purchase a 3rd party interface from Listen, it is supplied fully tested and pre-calibrated for use with SoundCheck.
Please be aware that not every pro-audio interface is suitable for making electroacoustic measurements. Even a high-specification interface may have characteristics that make it unsuitable or prevent it from being fully validated for use as an audio measurement interface. Any interface under consideration should be thoroughly evaluated, including characteristics such as noise floor, frequency response, sampling rate, stability, latency and driver compatibility, to establish suitability.
Please contact your sales engineer for guidance, and check out our Audio Interface compatibility table for a list of audio interfaces that we’ve validated for use with SoundCheck.
While the flexibility to use an audio interface that you already own can reduce the initial purchase price of a SoundCheck system, There are many advantages to using one of Listen’s dedicated audio test interfaces such as the 8-in 8-out AudioConnect 8×8, the 2-in 2-out AudioConnect 2, or the 6 in 2-out multifunction AmpConnect 621 which also contains an amplifier. These interfaces are specifically designed for audio measurement, and offer several advantages over pro-audio interfaces. They include microphone power and, in some cases, amplifiers. This avoids the need to purchase additional components, thus reducing system cost. Errors are minimized with a single USB connection to the computer to simplify cabling, and there are no external knobs that can be accidentally changed – all control is via the software. Plug-and-play operation makes set-up fast and easy. Listen’s audio interfaces also permit the use of SoundCheck’s autoranging feature which automatically maximizes signal-to-noise ratio to optimize measurement accuracy.
Why Use a Dedicated Audio Measurement Interface?
Check out this short video in which we explain why we created our own audio measurement interfaces, and demonstrated the benefits they offer.




