Signal Generator Secrets
Unlock the hidden potential of SoundCheck’s Signal Generator! From keyboard shortcuts to saving custom frequency favorites, we’ll be exploring some of the lesser-known features and capabilities of this virtual instrument.
Additional Resources for SoundCheck’s Signal Generator
Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.
Learn more about SoundCheck’s virtual instruments.
Learn more about enhancements to the signal generator in SoundCheck 22.
Video Transcript: Signal Generator Secrets
In this SoundCheck video tip, I’ll demonstrate some of the lesser-known features of the Signal Generator virtual instrument. Many front panel features are obvious, like the signal type dropdown selections, level and frequency fields, signal path selections, and the sample rate selector. But let’s explore some hidden features.
Did you know you can increment the frequency and level values from your keyboard? Pressing the F8 function key highlights the level field. Press it again, and it highlights the frequency field. On the level field, the Page Up and Page Down keys increment the level in 1dB steps. Press F8 again to move to the frequency field. Page Up and Page Down increment the frequency in 1/24 octave steps.
You can set the maximum and minimum output levels and frequencies using these sliders to limit the range of the signal path. This stops you from damaging your speaker with too much voltage or a frequency outside of its passband. Frequency and Level can also be controlled using a USB knob, such as this Drok knob.
Here’s another neat trick: right-click on the frequency numeric field to instantly set a 1 kHz frequency. You can also save and ‘favorite’ specific frequencies. You can see I’ve already saved 345 and 550 Hz. If I now want to also add 268 Hz, I can just add it, and it’s now available in the list. You can also quickly access standard octave frequencies based on the ISO preferred frequencies.
When I change the signal type to noise, the interface changes. You can control the minimum and maximum frequency of the noise, and this checkbox inverts the signal phase by 180 degrees.. You can also apply equalization, if it’s available on your signal path, by checking the EQ checkbox. The noise frequency resolution defaults to 1 Hz, and you can play it continuously, for a specific duration, or a set number of times.
For waveform playback, the interface shows both peak and RMS values. If we load a multi-channel wav file, we can select any channel and get additional information, such as whether it’s mono, stereo, or multi-channel, along with the sample rate and bit depth. Also, note the play start and end control that allows you to play a portion of a wav file or waveform.
At the bottom, there are controls for saving settings so that your configurations can be recalled at any time. You can set your favorite configuration as the default so the generator always opens with these settings, and use the “Save to Memory” button to save the current generator level into the memory list for easy recall.
Lastly, you can minimize or expand the generator, which is useful when you are using multiple generators and need to save screen space. That’s a quick demo of some lesser-known features of the Signal Generator. I hope you learned something new today!



