日志 Zarina

Thiele-Small Parameters

Loudspeaker system performance can be quantitatively related to a set of electro-mechanical parameters. These parameters are known in the industry as Thiele-Small parameters. They were first introduced by A.N.Thiele and Richard H.Small in a series of famous articles published in the 1971-72 Journal of AES (Audio Engineering Society).  Over the years these parameters have become […]

Headphones and EN50332

This webinar discusses the setup and execution of the EN-50332 standard sequence package for SoundCheck.  This standard outlines procedures for measuring the maximum output of headphones and portable music players. Presented by Brian Fallon, Listen, Inc. Status: Recorded. Watch Webinar  

Impedance Measurement

In this webinar we demonstrate how impedance can be measured using both highly accurate dual channel methods and simpler single channel methods. The presentation discusses the different test methods and show how each can be set up using SoundCheck. In addition, a novel, patent pending, method of single channel measurement that offers similar accuracy to […]

Loudspeaker Testing – An Overview

This webinar offers an overview of the many options for measuring loudspeakers in SoundCheck. Applications include R&D versus production measurements, measuring distortion, and testing frequency response without an anechoic chamber. Presented by Amandio Neves, Listen, Inc. Status: Recorded. Watch Webinar  

Telephone Testing – Advanced

This webinar explains why and how to use advanced test signals such as speech and pulsed noises to measure frequency response and distortion in complex devices. It includes details about interfacing to analog, digital, cellular, and VoIP phones. SoundCheck sequences which test to TIA and IEEE standards are also discussed. John Bareham, Consultant in Electroacoustics. […]

Telephone Testing – The Basics

This recorded webinar is an excellent introduction to the measurements and system setups common to almost all telephone standards. This includes measurement of send, receive, sidetone, and echo, as well as loudness ratings. The techniques discussed in this webinar apply to handset, headset, and speakerphone functions of analog, digital, cellular and VoIP phones. John Bareham, […]

Testing to the TIA-920-A Telephone Test Standards Using SoundCheck

A demonstration of how wideband digital phones can be tested to TIA-920-A, a comprehensive US standard for measuring wideband digital phones. The webinar demonstrates the physical setup, and shows a complete test in SoundCheck, from calibration to final result. Presented by John Bareham, Consultant in Electroacoustics. Status: Recorded. Watch Webinar  

Impedance Measurement – Dual Channel Method Using Math Post-Processing

This sequence demonstrates an alternative to the traditional SoundCheck single channel impedance measurement method. A stepped sine sweep from 20 Hz to 20 kHz is played through the speaker while the signal across the loudspeaker terminals is recorded by Direct In 1 and the signal across the sense resistor (impedance box) is recorded by Direct […]

Perceptual Rub & Buzz

This sequence uses the CLEAR algorithm for perceptual Rub & Buzz measurement to detect AUDIBLE Rub & Buzz. It uses a simplified auditory perceptual model to measure the loudness of Rub & Buzz distor­tion in phons rather than the more traditional dB SPL and % distortion units. These better identify whether distortion due to manufacturing […]

New Bluetooth Interface

The New BTC-4148 enables Bluetooth devices to be accurately tested in SoundCheck® by offering full control over the Bluetooth connection. Accurately measuring Bluetooth devices is challenging. The Bluetooth protocol is a dynamic and adaptive system that provides devices with many options and parameters that are normally negotiated and set in an invisible manner. Using typical […]