日志 Zarina

Laptop and PC Audio

We discuss and show measurement configurations to address the challenges of PC and laptop audio testing. Topics include communicating with the device under test and working with the physical test setup. Presented by Steve Temme, Listen, Inc. Status: Recorded. Watch Webinar  

Microphone Testing – an overview

This webinar outlines the basics of microphone testing in SoundCheck. It covers two main methods for measuring frequency response, discusses directional measurements, and reviews the SoundCheck sequence for measuring microphone self noise. Presented by Brian Fallon, Listen, Inc. Status: Recorded. Watch Webinar  

MP3 Player Testing

This webinar explains how to test MP3 players and other portable audio devices using SoundCheck. Topics include measuring frequency response, distortion, cross talk, and jitter. Presented by Amandio Neves, Listen, Inc. Status: Recorded. Watch Webinar  

Hearing Aid Testing

A general guide to testing all acoustic parameters of a hearing aid. It covers the basic measurements as well as the SoundCheck hearing aid test suite, which covers IEC and ANSI standards. Presented by Brian Fallon, Listen, Inc. Status: Recorded.  Watch Webinar  

Bluetooth Testing

This webinar demonstrates how to set up your SoundCheck system properly to test Bluetooth devices such as headsets and headphones. It covers the unique challenges associated with testing these products and how to address them. Presented by Steve Temme, Listen, Inc. Status: Recorded. Watch Webinar  

Headphone Testing – an Overview

Presented by Brian Fallon, SoundCheck Product Manager This recorded webinar is an overview of testing basic headphone parameters in SoundCheck. Topics include over the ear versus in-ear, ear simulator correction curves, digital headphones, and noise cancelling headphones. Watch Webinar  

Practical Implementation of Perceptual Rub & Buzz Distortion and Experimental Results

In a previous paper [1], we demonstrated how an auditory perceptual model based on an ITU standard can be used to detect audible Rub & Buzz in loudspeakers using a single tone stimulus. In this paper, we discuss a practical implementation using a stepped sine sweep stimulus and present detailed experimental results on loudspeakers including […]

Practical Measurement of Loudspeaker Distortion Using a Simplified Auditory Perceptual Model

Manufacturing defects in loudspeaker production can often be identified by an increase in Rub & Buzz distortion. This type of distortion is quite noticeable because it contributes an edgy sound to the reproduction and is annoying because it often sounds separate or disembodied from the fundamental signal. The annoyance of Rub & Buzz distortion is […]