技术资料
拥有超过100年的音频测量经验,我们的团队已经创建了丰富的技术论文,程序,文献以及其他有用的信息来协助您与您的测试需求。请浏览下面的系列收集,或按照资源类型过滤。
Filter By Category
Evolution of Time-Frequency Analysis Methods and their Practical Applications
/在: Algorithm Papers, Papers/通过: Zarina
Time-Frequency analysis has been in use for more than 20 years and many different Time-Frequency distributions have been developed. Four in particular, Short Time Fourier Transform, Cumulative Spectral Decay, Wavelet and Wigner-Ville have gained popularity and firmly established themselves as useful measurement tools. This paper compares these four popular transforms, explains their trade-offs and discusses how to apply them to analyzing audio devices. Practical examples of loudspeaker impulse responses, loose particles, and Rub & Buzz defects are given as well as a demonstration of their application to common problems with digital/analog audio devices such as Bluetooth headsets, MP3 players and VoIP telephones.
Authors: Pascal Brunet, Zachary Rimkunas and Steve Temme
Presented at the 123rd AES Convention, New York, 2007
Challenges of MP3 Player Testing
/在: Papers, Smart Device Papers/通过: Zarina
MP3 player audio performance is discussed including measurements of frequency response, phase response, crosstalk, distortion, sampling rate errors, jitter, and maximum sound pressure level with headphones. In order to make these measurements, several measurement techniques and algorithms are presented to overcome some of the challenges of testing MP3 players. We discuss test equipment requirements, selection of test signals and the effects of the encoding on these test signals. A new method for measuring non-coherent distortion using any test signal including music is also presented.
Authors: Steve Temme, Pascal Brunet and Zachary Rimkunas
Presented at the 122nd AES Convention, Vienna, 2007
The Challenges of MP3 Player Testing
/在: Smart Devices Technical Notes, Technical Notes/通过: ZarinaAuthor: Steve Temme
MP3 players have been the ‘must-have’ electronic gadget for the past few years. Over 10 million players were sold in 2005, and this is predicted to rise to more than double this by 2010. But how can manufacturers carry out QA tests on the production line, ensure excellent sound quality and demonstrate their compliance with Sound Pressure Level regulations? MP3 player testing is challenging as it combines traditional audio analysis techniques with some characteristics unique to MP3 players. Here, we examine the equipment and techniques that MP3 player manufacturers can use to test the sound quality of their products, and advise how to overcome some of the challenges inherent to measuring MP3 players.
Full Article
A New Method for Measuring Distortion using a Multitone Stimulus and Non-Coherence
/在: Algorithm Papers, Distortion Papers, Papers/通过: Zarina
A new approach for measuring distortion based on dual-channel analysis of non-coherence between a stimulus and response is presented. This method is easy to implement, provides a continuous distortion curve against frequency, and can be used with a multitone stimulus, noise, or even music. Multitone is a desirable test signal for fast frequency response measurements and also for assessing system nonlinearities. However, conventional single-channel multitone measurements are challenging because the number of intermodulation tones grows rapidly with the number of stimulus tones and makes it extremely difficult to separate harmonics from intermodulation products. By using dual-channel measurement techniques, only well-known, standard signal processing techniques are used, resulting in simplicity, accuracy and repeatability.
Authors: Steve Temme and Pascal Brunet
Presented at the 121st AES Convention, San Francisco, 2006
Higher Order Harmonic Signature Analysis for Loudspeaker Defect Detection
/在: Algorithm Papers, Distortion Papers, Papers/通过: Zarina
Loudspeaker assembly faults, such as a rubbing voice coil, bent frame, loose spider, etc., have traditionally been detected using experienced human listeners at the end of a production line. Previous attempts to develop production measurement systems for on-line testing typically analyze only low-order harmonics for the primary purpose of measuring total harmonic distortion (THD), and thus are not specifically designed to detect defective rub, buzz, and ticking sounds. This paper describes a new method wherein the total energy of high-order harmonics groups, for example, 10th through the 20th or 31st through the 40th, are measured and analyzed. By grouping high-order harmonics and resolving their respective total energies, distinct signatures can be obtained that correlate to the root cause of audible rub and buzz distortions (Temme, 2000). The paper discusses loudspeakers tested with specific defects, as well as results of a computer-based electroacoustic measurement and analysis system used for detection.
Authors: Dan Foley, Dr. Robert Celmer, Benjamin Sachwald, James Anthony, Tony Pagliaro, Shane Thompson
Presented at the 117th AES Convention, San Francisco, 2004
Enhancements for Loose Particle Detection
/在: Algorithm Papers, Distortion Papers, Papers/通过: Zarina
During loudspeaker production, particles may become trapped in the loudspeaker motor and voice coil vicinity, resulting in a distinctive defect that is easily heard, but difficult to detect by traditional test and measurements. We found that a Sine Sweep Stimulus followed by a High Pass Filter and RMS Envelope Analysis efficiently detected Loose Particles and Rub & Buzz defects. The remaining problem is how to reduce the effect of background noise, and get more reliable results. Statistical descriptors such as Crest Factor, Skewness, and Kurtosis are first investigated. Experimental results are given and the different tools are compared. New enhancements are described that increase effectively the overall immunity to background noise and discrimination of the method.
Authors: Pascal Brunet and Steve Temme
Presented at the 116th AES Convention, Berlin, 2004
Soundcard-Based Production Line Loudspeaker Test
/在: Article Reprints, Production Test Article Reprints/通过: ZarinaAuthor: Steve Temme
Reprinted from the July 2004 issue of Voice Coil
Steve Temme discusses high-end loudspeaker manufacturer, Peerless’s choice of SoundCheck® as their standard for testing their loudspeakers.
Article Introduction
Soundcard-Based Production Line Loudspeaker Test
By Steve Temme, Listen Inc.
Quality and reliability are critical factors for success in the audio industry. In today’s global manufacturing environment, product testing is more important than ever, and products built in low-cost countries must be tested to the same standards as those manufactured in the US and Western Europe.
Peerless, one of the world’s leading manufacturers of high-end audio speakers, produces over half a million loudspeakers a year. Peerless belongs to the Danish Sound Technology group (DST), together with Vifa and Scan-Speak. Their headquarters in Karlslunde, Denmark, still produce a majority of the speakers, and the DST manufacturing facilities in China produce a growing number of speakers.
Every single speaker that Peerless manufactures is tested for acoustic quality using SoundCheck®, a soundcard-based electroacoustic test and measurement system. This offers significant advantages over conventional hardware-based systems including fast and simple production line use, low capital expenditure and easy analysis and sharing of test specifications and results (Photo 1).
Peerless has manufactured loudspeakers in Denmark since 1926, and in 1995 the former Vifa-Speak (now DST) established an additional manufacturing facility in Panyu, China. In 2002, Peerless established a second facility in Xiaolan, China. These modern facilities offer cost-effective, high quality manufacturing to supplement the output of the Danish factory.
Peerless conducts 100% quality testing of its products, and tests to exactly the same standards regardless of where the product is manufactured. In the Xiaolan facility, SoundCheck is also used for R&D work where a dedicated SoundCheck system measures frequency response and Thiele/Small parameters in a large 2pi room. With production lines several thousand miles apart, using the same test setup and equipment simplifies quality control (Photo 2). As Carsten Tinggard, the engineer responsible for the test systems, explains, “Our reputation is built on quality and reliability. Therefore, every loudspeaker that Peerless manufactures, either here in Karlslunde, or in China, is 100% tested as it comes off the production line using SoundCheck electroacoustic test software.”
Loose Particle Detection
/在: Algorithm Papers, Distortion Papers, Papers/通过: Zarina
During the loudspeaker manufacturing process, particles may become trapped inside the loudspeaker, resulting in a distinctive defect that is easily heard but difficult to measure. To give a clearer view of the problem, Time-Frequency maps are shown for some defective loudspeakers. Based on this analysis, a reliable testing procedure using a swept-sine stimulus, high-pass filter, and RMS-envelope analysis is presented. Further possible enhancements and applications of the method are listed.
Authors: Pascal Brunet, Evan Chakroff and Steve Temme
Presented at the 115th AES Convention, New York, 2003









