Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

AES75 (M-Noise) Measurement of Max SPL for Loudspeakers (100 Things #35)

September 22, 2022/in 100 Things Videos, Blog, Loudspeaker Videos/by Zarina

The AES75 standard details a method for measuring maximum linear sound levels of a loudspeaker system or driver using M-Noise, a test signal specifically developed to emulate the dynamic characteristics of music. Our pre-written test sequence automates this measurement to the new AES 75 standard for Maximum SPL, removing subjectivity, increasing reliability, and saving time.

Automated AES75 Measurements in SoundCheck

More Resources for Measurement to AES75

Would you like to try this yourself? If you already have SoundCheck, you can download the AES75 (M-Noise) test sequence. Please note that you will need the waveform filter (part # 2032) and transfer function (part # 2021) modules installed on your SoundCheck system.

Get a copy of the AES75 Standard.

 

Video Script: Automate Measurements Using M-Noise with SoundCheck

Our pre-written test sequence automates measurement to the new AES 75 standard for Maximum SPL, removing subjectivity, increasing reliability, and saving time.

This standard details a method for measuring maximum linear sound levels of a loudspeaker system or driver using M-Noise, a test signal specifically developed to emulate the dynamic characteristics of music. Clearly defined limits for linear frequency response and coherence determine the Max SPL level and remove any measurement ambiguity.

Implementing the standard manually relies on an operator’s subjective judgment of real time spectrum analyzer data. It also requires multiple iterations of a measurement, therefore is labor intensive.

Our test sequence is fully automated. We use the same test signal and calculations outlined in the standard, but automated analysis steps objectively calculate the measurements and drive the next steps in the procedure.

Let’s take a look.

Here, you can see we are using the freely available M-Noise test signal introduced by Meyer Sound. This stimulus features a relatively constant peak level as a function of frequency, but a diminishing RMS level with increasing frequency.

First, we use a test signal approximately 20dB below our expected Max SPL to obtain a provisional linear frequency response, linearity, coherence and signal to noise ratio. We then increase the test level by 3dB, and compare the results to the initial value. The results must be within +/- 1dB, have a coherence of at least 97% and a signal to noise ratio 15dB or higher so that we know we are operating in the speaker’s linear region and our signal to noise ratio is sufficient for accurate measurements.

Next we automatically increase the test level by 3dB and compare it to the initial results, normalized to the current test level. Multiple measurement iterations take place until one of the ‘stop’ conditions is reached. These conditions are either:

  • the live measurement differs from the linear frequency response by at least 2 dB over at least two octaves
  • the live measurement differs from the linear frequency response by at least 3 dB anywhere, or
  • the Coherence Reduction Target is met –  this means the signal to noise ratio is 10dB or less and/or the coherence is 91% or less.

When one of these limits is reached, the sequence then reduces the test level to the last level that passed and repeats the measurements in 1dB increments to find the precise Level at which the response deviates from the base level.

Once this level is established, the device enters a burn-in process, where the M Noise stimulus is played through the DUT for five minutes and fifty-three seconds and again compared to the initial result. This long duration measurement is also used to generate peak, rms and A weighted RMS sound levels. If the response curve remains consistent, this curve is the Max SPL curve according to the standard. If it is not within the acceptable limits, the device is cooled down and the tests repeated with a longer stimulus duration.

All the operator needs to do is enter any stimulus limits based on the operating range of the DUT into the sequence before starting, then return when the test is complete.

As well as saving time, SoundCheck mathematically calculates the data in analysis steps within the sequence, which avoids the subjectivity of relying on operator interpretation of real-time spectrum analyzer outputs. This increases repeatability and confidence in the results. This sequence is available free of charge on our website. Check it out!

 

 

 

Share
  • Share on Facebook
  • Share on Twitter
  • Share on WhatsApp
  • Share on LinkedIn
  • Share by Mail
https://www.listeninc.com/wp/media/2023/11/100_things_35_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-09-22 16:27:032026-08-21 13:34:41AES75 (M-Noise) Measurement of Max SPL for Loudspeakers (100 Things #35)

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Display Phase Measurement Alongside Frequency Response (100 Things #34)Using Virtual Instruments for Greater Acquisition Flexibility (100 Things #...
Scroll to top