Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

Headphone Testing (part 1) – The Basics

December 8, 2011/in Article Reprints, Headphone Article Reprints/by Zarina
Picture showing Headphone Testing Part 1 article from VoiceCoil

Headphone Testing Part 1

Author: Steve Temme. Reprinted from the December 2011 issue of Voice Coil.

In part 1 of this 2-part series, Steve Temme discusses the basics of headphone testing. He covers the similarities and differences between loudspeaker and headphone testing. He discusses coupler correction curves and ear seal, and how these are important for accurate measurements. There are details on various types of headphones and how that affects the test equipment and configuration. Finally, he discusses the types of acoustic tests that are commonly implemented, and the standards that apply to headphone measurement.

Full Article

 

Read the first few paragraphs of Headphone Testing Part 1 Article

Introduction
As more and more loudspeaker engineers find themselves employed in the fast-growing headphone market, either through company diversification or changing jobs, it is important that the unique challenges of testing headphone packages are fully understood. Many of the characteristics that make for a good in-room listening experience with a loudspeaker—good frequency response, low distortion, no Rub & Buzz or loose particles, etc.—also apply to headphones, and many of the principles of loudspeaker test apply. However, there are some major differences and additional issues that need to be taken into account. These include couplers and associated correction curves, acoustic seal, fixturing, and additional tests such as L/R tracking. In this article, we discuss the issues that are common to testing all types of headphones. In Part 2 (a future article) we will address the specific needs of special cases of headphones such as Bluetooth and USB headphone testing, noise-cancelling headphones, and Max SPL measurements to prevent hearing loss.

Similarities and Differences
First, let us look at the similarities in testing loudspeakers and headphones. The set-up essentially consists of an electroacoustic measurement system, some kind of ear simulator containing a reference microphone, and the device under test. A test signal is sent to the transducer (headphone), which in turn is measured by a reference microphone in a coupler. The basic measurements made on headphones are very similar to those made on loudspeakers. These include frequency response, phase (polarity), distortion (THD and Rub & Buzz), and impedance.

In both cases, the test signal is usually a swept sine wave, and the level can vary. Some set the drive level to achieve a certain sound pressure level at a given frequency; others choose the level that equates to 1 mW of power. Certain products may necessitate testing the frequency response at one level and performing a second, higher level test for distortion. Now, let us look at the differences. The primary difference in the test set up between a loudspeaker and a headphone measurement is in the way in which the transducer interacts with the microphone. Whereas loudspeakers are tested in open air, a headphone or earphone must be presented with an acoustic load that simulates the human ear. It is common to compare the left and right-channel frequency response. Large differences at certain frequencies can be very audible in a stereo device, even though the individual responses may be within specification. Sometimes, electrical characteristics such as crosstalk may also be measured.

Considerations
Before beginning to test headphones, there are two major considerations that need to be taken into account—correction curves, and the acoustic seal. These both have an effect of the frequency response. The latter also affects the repeatability of measurements.

Coupler Correction Curves
Loudspeaker engineers are familiar with the ideal frequency response for a loudspeaker measured in the free field being a flat line (see Figure 1a). For headphones, however, this is not the case. Headphone measurements are taken at what is known as the Drum Reference Point (DRP)—a point representing the human eardrum. Figure 2 shows where this is on a Head & Torso Simulator (HATS). If you were to measure the same loudspeaker that produced the flat free-field response curve in Figure 1a at the Drum Reference Point, the frequency response would look like Figure 1b. In other words, for a headphone to sound like a loudspeaker with a flat frequency response, it must produce a frequency response curve like Figure 1b.

This frequency response curve is a correction curve, or transfer function that represents the effects of the head, torso, pinna, ear canal and ear simulator. To further complicate matters, different correction curves are applied according to whether your measurements are made in the free field (anechoic room) or diffuse field (reverberation room) (see Figure 3). For the most part, like loudspeaker measurements, the free field is used. Typically, when making measurements, the subtraction of the correction curve from the actual measurement can be carried out in your test software, so that your output frequency response is shown as the familiar straight line.

Headphone/Ear Seal
Another issue that needs to be addressed when testing headphone is the acoustic seal, or leakage. Realistic headphone measurements (using a HATS or similar) have a certain degree of leakage as the headphone does not fit tightly to the pinna. This has an effect on the frequency response, with a demonstrable loss at low frequencies (see Figure 4). Although realistic, it affects the repeatability of measurement. In the R&D lab, this is compensated by repeating the measurement multiple times, removing and repositioning the headphone between each measurement and averaging; on the production line different couplers and fixtures are used to offer a more repeatable seal—these are discussed in more detail below.

Read Full Article

 

Check out our main Headphone Testing page.

 

https://www.listeninc.com/wp/media/2011/12/VC_headphone_test_part1_article.jpg 1275 974 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2011-12-08 16:16:332025-08-27 14:28:30Headphone Testing (part 1) – The Basics

Automated Perceptual Rub & Buzz Distortion Measurement

September 8, 2011/in Algorithm Article Reprints, Article Reprints/by Zarina

Author: Steve Temme.  Reprinted from the September 2011 issue of Voice Coil.

In this article, Steve Temme discusses Listen’s latest work on perceptual Rub & Buzz measurement.
Full Article

https://www.listeninc.com/wp/media/2011/09/VoiceCoil_Sept2011_CLEAR_Page_01-scaled.png 2560 1951 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2011-09-08 16:18:562025-09-04 14:47:32Automated Perceptual Rub & Buzz Distortion Measurement

SoundCheck ONE

October 8, 2010/in Article Reprints, Product Review Article Reprints/by Zarina

Author: Vance Dickason. Reprinted from the October 2010 issue of Voice Coil.
VoiceCoil Editor Vance Dickason offers this user report of SoundCheck® ONE – the low cost production line test system from Listen.
Full Article

https://www.listeninc.com/wp/media/2010/10/VoiceCoil_Oct2010_SC_ONE_Page_1-scaled.png 2560 1950 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2010-10-08 16:22:042025-09-04 10:59:27SoundCheck ONE

Soundcard-Based Production Line Loudspeaker Test

April 8, 2004/in Article Reprints, Production Test Article Reprints/by Zarina

Author: Steve Temme
Reprinted from the July 2004 issue of Voice Coil
Steve Temme discusses high-end loudspeaker manufacturer, Peerless’s choice of SoundCheck® as their standard for testing their loudspeakers.

Full Article

 

Article Introduction

Soundcard-Based Production Line Loudspeaker Test
By Steve Temme, Listen Inc.

Quality and reliability are critical factors for success in the audio industry. In today’s global manufacturing environment, product testing is more important than ever, and products built in low-cost countries must be tested to the same standards as those manufactured in the US and Western Europe.

Peerless, one of the world’s leading manufacturers of high-end audio speakers, produces over half a million loudspeakers a year. Peerless belongs to the Danish Sound Technology group (DST), together with Vifa and Scan-Speak. Their headquarters in Karlslunde, Denmark, still produce a majority of the speakers, and the DST manufacturing facilities in China produce a growing number of speakers.

Every single speaker that Peerless manufactures is tested for acoustic quality using SoundCheck®, a soundcard-based electroacoustic test and measurement system. This offers significant advantages over conventional hardware-based systems including fast and simple production line use, low capital expenditure and easy analysis and sharing of test specifications and results (Photo 1).

Peerless has manufactured loudspeakers in Denmark since 1926, and in 1995 the former Vifa-Speak (now DST) established an additional manufacturing facility in Panyu, China. In 2002, Peerless established a second facility in Xiaolan, China. These modern facilities offer cost-effective, high quality manufacturing to supplement the output of the Danish factory.

Peerless conducts 100% quality testing of its products, and tests to exactly the same standards regardless of where the product is manufactured. In the Xiaolan facility, SoundCheck is also used for R&D work where a dedicated SoundCheck system measures frequency response and Thiele/Small parameters in a large 2pi room. With production lines several thousand miles apart, using the same test setup and equipment simplifies quality control (Photo 2). As Carsten Tinggard, the engineer responsible for the test systems, explains, “Our reputation is built on quality and reliability. Therefore, every loudspeaker that Peerless manufactures, either here in Karlslunde, or in China, is 100% tested as it comes off the production line using SoundCheck electroacoustic test software.”

Full Article

https://www.listeninc.com/wp/media/2004/04/reprint_voicecoil_2004-07_peerless_Page_1-scaled.png 2560 1960 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2004-04-08 16:23:362025-09-03 13:57:36Soundcard-Based Production Line Loudspeaker Test
Page 3 of 3123

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top