Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

The Evolution of Production Line Rub & Buzz Measurements

April 4, 2022/in Algorithm Article Reprints, Article Reprints, Headphone Article Reprints, Loudspeaker Article Reprints, Production Test Article Reprints/by Zarina

Steve Temme discusses the evolution of production line Rub & Buzz measurements in this April 2022 issue of AudioXpress. Starting with  simultaneous analysis of higher order harmonics, he explains the progression of improvements including the greater accuracy offered by normalized distortion measurements, and progressing to the introduction of perceptual metrics. He covers the introduction of the first perceptual distortion algorithm introduced in 2011, and the newest enhancements to this which offer the repeatability necessary for successful end-of-line perceptual distortion measurement, where the reduction in false rejects and resulting higher yields add significant value to speaker and headphone manufacturers.

Full Article

 

The Evolution of Production Line
Rub & Buzz Measurements

Rub & Buzz defects in loudspeakers, headphone drivers, and microspeakers generate an immediate perception of poor quality. This article follows the development of production line Rub & Buzz detection, starting with the conventional methods that, although developed 25 years ago, are still valuable and well-used today, and ending with the latest perceptual algorithms.

 

Production line detection of loudspeaker Rub & Buzz defects is important because the harsh sounds created by such faults instantly result in customer perception of poor quality. Such defects are almost always due to manufacturing errors, for example, the loudspeaker spider or surround may not be properly glued, the voice coil lead wires could be the wrong length, or the voice coil may be rubbing. If not immediately identified and corrected, these faults cause high volumes of waste and low yield, or worse still, customer returns.

Not all Rub & Buzz faults detected by conventional mechanisms are audible—the masking effects of the human ear and background noises can render some of them inaudible even though they are clearly present when the signal is analyzed. In the quest for higher yields, it’s valid to question whether a speaker with inaudible faults needs to be rejected. This is particularly true for smaller and lower-margin products (e.g., microspeakers used in mobile phones, laptops, and some smart devices). Over the past decade, this desire for lower costs and higher yields has driven the development of accurate perceptual distortion algorithms that reliably identify whether a fault is audible, rather than simply whether it exists.

This article follows the development of production line Rub & Buzz detection, starting with the conventional methods that, although developed 25 years ago, are still valuable and well-used today, and ending with the latest in perceptual analyses. The trade-offs between each are discussed, and the reasons why both conventional (higher-order harmonic) and perceptual distortion measurements provide valuable data points for end-of-line tests are explained. It should be noted that these days, production line Rub & Buzz measurements are equally likely to be used on headphone drivers or microspeakers as they are conventional loudspeakers, and perceptual measurements are rapidly gaining traction in the quest for higher yields of such lower cost products.

 

What Causes Rub & Buzz
Rub & Buzz defects are almost exclusively introduced in the manufacturing process. The term “Rub & Buzz” refers to the presence of higher-order harmonics, which create a harsh buzzing sound that often becomes particularly obvious at higher playback levels. Such sounds are created when something abruptly impedes the free movement of the speaker mechanism, for example, loose glue joints, vibrating voice coil lead wires hitting another loudspeaker part (e.g., the cone), or an incorrectly centered and rubbing voice coil.

https://www.listeninc.com/wp/media/2022/03/icon_AX-04-Apr-2022-2_eprb.jpg 259 200 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-04-04 20:23:152025-09-04 17:40:58The Evolution of Production Line Rub & Buzz Measurements

How to Measure Free Field Speaker Response without an Anechoic Chamber

March 1, 2021/in Article Reprints, Blog, Loudspeaker Article Reprints, Measurement Technique Article Reprints/by Zarina

Did you knowSimulated Free field measurement you can make free field speaker response measurements without an anechoic chamber? In the March 2021 issue of VoiceCoil, Steve Temme explains his unique method for achieving this. The article explains how the ‘splice’ method results in a full range frequency response from a combination of near-field and windowed far-field measurement, and compares the results with anechoic chamber measurements and the manufacturer’s published response curve.

Full Article

Simulated Free Field Speaker Response Measurement

Source: “How to Measure Free-Field Speaker Response without an Anechoic Chamber” by Steve Temme, Voice Coil, March 2021.

Main Theme: The article presents a practical and cost-effective method to obtain simulated free-field speaker response measurements without needing an anechoic chamber, particularly useful for those working with limited resources.

Key Ideas/Facts:

  • Challenge: The COVID-19 pandemic highlighted the difficulty of conducting free-field speaker measurements outside a lab setting, as anechoic chambers are not easily transportable.
  • Traditional Solutions (and their limitations):
    • Anechoic Chambers: Expensive and not readily accessible. Suffer from low-frequency cut-off limitations depending on chamber size.
    • Large Open Spaces: Impractical due to logistical challenges and uncontrollable environmental factors.
  • Proposed Solution: The article advocates for the “splice measurement” technique, a long-established but often overlooked method.
  • How it Works: Combines a near-field measurement (accurate at lower frequencies) with a time-windowed far-field measurement (captures higher frequencies).
  • Software Simplification: SoundCheck software (specifically version 18 or newer with the LogTSR module) greatly simplifies the process with a dedicated test sequence.
  • Practical Implementation:
    • Requires: SoundCheck software, audio interface, microphone, amplifier (optional), and a standard room.
    • Procedure: The software guides the user through near-field and far-field measurements, suggests a time-window for the far-field data, and then automatically splices the measurements together.
  • Case Study: Indy Acoustic Research successfully used this method to measure a Tannoy System 600 speaker, achieving results comparable to measurements taken in an anechoic chamber.
    • “These results demonstrate how simulated free-field measurement using a splice sequence to combine near-field measurements and time-windowed far-field measurements yield results that align well with those made in an anechoic chamber.”
  • Advantages:
    • Cost-effective alternative to anechoic chambers.
    • Achievable in a typical room setting.
    • Relatively simple setup and execution using readily available software.

Significance: This technique provides a valuable tool for audio engineers and acoustic professionals to obtain accurate free-field speaker measurements without significant investment or reliance on specialized facilities. This is particularly beneficial for smaller companies, independent researchers, or anyone needing to conduct these measurements remotely.

Full Article

https://www.listeninc.com/wp/media/Article_VC_Mar2021_Simulated_Free_Field_cover.jpg 394 300 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2021-03-01 15:27:012025-09-04 16:40:40How to Measure Free Field Speaker Response without an Anechoic Chamber

Listen Celebrates 25 Years

September 11, 2020/in Article Reprints, Company News/by Zarina

25 Years of Audio Measurement: A Retrospective2020 is Listen’s 25th anniversary! When Listen sold its first product in 1995, it was the first soundcard-based audio measurement system, and its competition was often human listeners. Now, with an installed base of well over 10,000 systems and the industry-wide adoption of both soundcard-based architecture and highly automated sequence-based measurement, Listen is still leading the way with new algorithms and product development to meet the changing needs of the marketplace. In this article, reprinted from Loudspeaker Industry Sourcebook, Listen founder and president, Steve Temme, shares his story.

Full Article

Listen, Inc.: 25 Years of Audio Measurement Evolution

Source: “25 Years of Audio Measurement: A Retrospective” by Steve Temme (President, Listen, Inc.)

Main Theme: This article provides a historical overview of Listen, Inc.’s 25-year journey, highlighting the company’s adaptation and innovation in the face of rapid technological advancements in the audio industry.

Key Ideas and Facts:

1. The Genesis of SoundCheck:

  • In 1995, Steve Temme envisioned a software-based audio test system that was faster, more flexible, and cost-effective than the prevalent hardware-based systems.
  • This vision led to the creation of SoundCheck, a revolutionary system built on the National Instruments LabVIEW platform, enabling test configuration through a user-friendly point-and-click interface.

2. Adapting to a Changing Audio Landscape

  • Listen, Inc. demonstrated remarkable adaptability, constantly evolving SoundCheck to meet the demands of new audio devices and technologies.
  • The company successfully navigated major shifts, including the rise of cellphones, MP3 players, smartphones, headphones, MEMS microphones, and voice-activated devices.

3. Key Innovations and Solutions

  • Open-loop Testing: Developed to address challenges in measuring devices with asynchronous input and output, particularly crucial for MP3 players and smartphones.
  • Multichannel Testing: Expanded SoundCheck’s capabilities to test multiple channels simultaneously, essential for MEMS microphone arrays and other multichannel applications.
  • Bluetooth Testing: Partnered with Portland Tool and Die to offer Bluetooth interfaces integrated with SoundCheck, enabling comprehensive Bluetooth device testing.
  • Voice Recognition Testing: Leveraged existing SoundCheck functionalities and developed new algorithms for testing voice-activated devices, including cloud-based test signal storage and ETSI-standard background noise generation.
  • Hardware products: Audio interfaces specifically designed for production line audio test simplifies testing and reduces errors.

4. Looking Ahead

  • Temme anticipates continued innovation in audio, driven by trends like voice control, remote work, and the pursuit of better sound quality.
  • He emphasizes the importance of correlating measurements with human perception and investing in algorithms that accurately reflect the human listening experience.

Quotes:

  • “In today’s world of software and industrial automation, it seems strange to recall that less than 25 years ago, I was trying to convince people that software could be cheaper and more reliable than human labor!” – Steve Temme
  • “No doubt we will also see whole new classes of devices that haven’t been conceived yet, which will present new testing challenges.” – Steve Temme

Conclusion:

Listen, Inc.’s 25-year journey exemplifies successful adaptation and innovation within a rapidly evolving technological landscape. The company’s commitment to developing flexible, user-friendly, and cutting-edge audio test solutions has solidified its position as a leader in the industry. The briefing document provides a concise yet comprehensive overview of the company’s key milestones, challenges overcome, and vision for the future.

Full Article

https://www.listeninc.com/wp/media/LIS-2020_25_years_article.jpg 755 576 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2020-09-11 01:21:332025-09-04 16:39:05Listen Celebrates 25 Years

Practical Testing of Voice Controlled Devices

January 13, 2020/in Article Reprints, Smart Device Article Reprints/by Zarina

This article discusses tools and techniques that are available to accurately measure the audio performance of voice controlled devices under the many various real-world conditions they may be used. It covers basic acoustic measurements such as frequency and distortion response, which have always been carried out on conventional wired systems, and the more complex real-world tests that apply specifically to voice-activated devices, along with the techniques and standards that may be used.

Author: Steve Temme. Reprinted from the Jan 2020 issue of AudioXpress.

Full Article

Voice Controlled Devices – Audio Testing and Key Considerations

This briefing document reviews key themes and important takeaways from the provided excerpts of “Practical Testing of Voice-Controlled Audio Devices” (ax, January 2020). The document focuses on the complexities of testing voice-controlled audio devices, including smart speakers, hearables, and automotive infotainment systems, and highlights relevant industry standards and test system recommendations.

Main Themes:

  1. Complexity of Testing: Unlike traditional audio devices, voice-controlled devices present unique testing challenges due to:
    • Diverse interfaces (Bluetooth, cloud, voice assistants)
    • Extensive signal processing (beamforming, noise cancellation)
    • Multifunctional nature (voice recognition, music playback, communication)
    • Real-world condition dependence (background noise, playback levels)
  2. Importance of Real-World Testing: The article emphasizes the need to test devices under various real-world conditions. Factors like background noise, playback levels, and user interaction significantly impact performance and should be considered during testing.
  3. Leveraging Existing Standards: While specific standards for smart device testing are limited, the article recommends adopting guidelines from similar devices like speakers, headphones, hearing aids, and telephones (IEC, EN, IEEE, TIA, ITU, ANSI, ETSI).
  4. Open-Loop Measurement Challenges: Open-loop systems, characteristic of smart devices, lack a synchronous signal path, leading to sampling rate errors. The article explains how algorithms utilizing triggers and heterodyne filtering correct these errors for accurate analysis.
  5. Cloud-Based Measurement Complexities: Testing involves interacting with devices like a real user, utilizing cloud services for playback and recording. The article describes the setup and intricacies of testing via the cloud, including voice commands, signal routing, and manufacturer-specific ecosystems.

Important Ideas/Facts:

  • Basic Acoustic Tests: Essential for measuring frequency response, distortion, and stereo tracking in both wired and wireless modes. Requires calibrated equipment like mouth simulators, measurement microphones, and ear simulators (HATS recommended for hearables and infotainment systems).
  • Open-Loop Measurements: A technique to correct sampling rate errors inherent in open-loop systems. The article details the process of using trigger signals, heterodyne filtering, and resampling for accurate frequency and distortion analysis.
  • Measurements via the Cloud: This involves using voice commands, proprietary voice services, and cloud platforms for signal injection and extraction. The article explains the setup and challenges of testing various smart device functionalities through the cloud.
  • Nonlinear Behavior: The performance of smart devices varies based on factors like background noise type and volume, music playback, and voice communication. The article highlights the need to account for this nonlinearity during testing.
  • Speech Recognition Testing: Evaluating the accuracy of voice command understanding is crucial. The article recommends using “Harvard Sentences,” a phonetically balanced sentence set, as track titles for testing different voices, accents, and background noise conditions.
  • Background Noise Simulation: Crucial for testing voice recognition, SNR optimization, and beamforming. The article recommends using ETSI standard ES 202 396-1, which provides binaural recordings of various noise environments, to create realistic test scenarios.
  • Voice Quality Evaluation: For devices functioning as hands-free communication tools, the article suggests using telephone test sequences like TIA standard TIA920, which covers both hands-free and headset devices.
  • Noise Cancellation Assessment: Especially relevant for hearables and infotainment systems. The article outlines the procedure for measuring passive isolation, active attenuation, and total attenuation using a calibrated background noise system.
  • Hearing Assistance Measurement: For hearables with hearing enhancement features, the article recommends testing amplification and compression algorithms according to ANSI/IEC hearing aid standards using anechoic test boxes and artificial ears.

Test System Recommendations:

The article concludes with a checklist of functionalities to consider when selecting a test system for voice-controlled audio devices:

  • Input and output component testing
  • Open-loop testing capabilities
  • Speech and music signal support
  • Background noise generation
  • Cloud signal routing (virtual audio cable)
  • Pre-written test sequences (TIA)
  • Flexible test programming
  • Calibrated Bluetooth interface
  • Automotive bus compatibility (e.g., A2B)

By understanding the complexities and utilizing appropriate testing methodologies, manufacturers can ensure optimal audio performance and user experience in voice-controlled audio devices.

Full Article

https://www.listeninc.com/wp/media/2020/01/Practical_testing_of_voice_controlled_devices_AX-January-2020_Page_01-scaled.png 2560 1678 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2020-01-13 16:58:262025-09-04 16:35:50Practical Testing of Voice Controlled Devices

An Interview with Steve Temme

March 20, 2018/in Article Reprints, Corporate and Misc Article Reprints/by Zarina

Shannon Becker interviews Steve Temme about how he founded Listen, Inc. and grew it from a start-up into an audio measurement leader.

Author: Shannon Becker.  Reprinted from the March 2018 issue of Audio Xpress.

Full Article

Steve Temme and the Evolution of Listen, Inc.

Main Themes:

  • Innovation and Perseverance: Steve Temme’s journey, from a childhood fascination with audio to founding Listen, Inc., showcases a dedication to pushing boundaries and overcoming challenges.
  • Evolution of Audio Testing: The development and growth of SoundCheck mirrors the changing landscape of the audio industry, highlighting the shift from manual to automated testing and the rise of new technologies like Bluetooth and voice control.
  • Impact and Adaptability: SoundCheck’s widespread adoption underscores its significant influence on the audio industry, ensuring consistent quality control in a variety of devices, from headphones to smart speakers.

Most Important Ideas and Facts:

  • Genesis of SoundCheck: Temme conceived SoundCheck while working at Brüel & Kjær and consulting for Sonetronics. He recognized the potential of PC-based systems to offer a more affordable, faster, and flexible alternative to traditional hardware-based audio analyzers.
  • Overcoming Early Challenges: Faced with financial constraints and a lack of willing partners, Temme taught himself LabVIEW programming and dedicated countless hours to develop the first version of SoundCheck. His commitment to simplifying test setup, with a user-friendly interface, proved crucial to the product’s success.
  • Key Innovations: SoundCheck differentiated itself through innovations like the “Stweep” test signal and HarmonicTrak algorithms, enabling faster and more accurate measurements. Listen, Inc. consistently pushed the boundaries of audio testing, being among the first to implement the Farina sweep and develop advanced distortion measurement techniques like Perceptual Rub & Buzz.
  • Adapting to Market Trends: SoundCheck evolved alongside the audio industry, incorporating features to test Bluetooth devices, cloud-connected devices, and voice-controlled technologies. The flexible architecture of the software allowed it to adapt to new interfaces and measurement challenges.
  • Future Outlook: Listen, Inc. continues to focus on expanding its testing capabilities for emerging technologies, particularly in the realm of voice control and smart devices. The company is actively developing new products and algorithms to address the evolving needs of the audio industry.

Conclusion:

Steve Temme’s story and the success of SoundCheck demonstrate the power of innovation, perseverance, and adaptability in a rapidly evolving industry. Listen, Inc. remains at the forefront of audio testing, constantly pushing boundaries and ensuring that the audio devices we rely on meet the highest quality standards.

Full Article

https://www.listeninc.com/wp/media/2018/03/Article_AE_Mar2018_Steve_Temme_Interview_Page_1.png 1632 1219 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2018-03-20 17:00:222025-09-04 16:17:01An Interview with Steve Temme

Practical Measurement of Bluetooth and Lightning Headphones

March 20, 2018/in Article Reprints, Headphone Article Reprints/by Zarina
Picture of Bluetooth Headphone Testing Article reprint

Bluetooth Headphone Testing Article

Author: Daniel Knighten.  Reprinted from the July 2017 issue of Voice Coil.

In this article, Dan Knighten discusses Bluetooth headphone testing and Lightning headphone testing, specifically how to overcome the challenges of measuring headphones with wireless and digital interfaces such as Bluetooth, Lightning and USB-C to make the same measurements as on conventional wired headphones.

Full Article

 

 

 

Article Text

Practical Measurement of Bluetooth and Lightning Headphones

For decades, headphones have been passive devices with a direct, analog interface. Today, we are seeing a proliferation of headphones with wireless Bluetooth interfaces and various kinds of new and often proprietary digital interfaces. These new interfaces include Apple’s Lightning port and USB-C. In all cases these headphones present unique challenges to measurement because they cannot be directly connected to traditional test and measurement systems. In this article, we will explore how to overcome these interface challenges in order to make standard measurements on devices with nonstandard audio interfaces.

Closed Loop and Open Loop Testing
To begin, let’s define what we mean by open and closed loop testing. The test configuration for conventional headphone measurements, as seen in Figure 1, is what we term a “closed loop measurement.” This traditional type of audio measurement has been done for years with
all types of transducers (e.g., loudspeakers, headphones, microphones, etc.), and audio measurement systems can make these measurements without problems. The test signal passes from the audio interface through the speaker/headphone where it is converted to sound
pressure. Then, it goes through the microphone where it is converted back to voltage for analysis. The entire path from input to output is on the same interface, usually in the same domain (analog), and most critically, the analysis system’s input and output sample rate are
perfectly synchronous. The entire measurement from signal generation to capture of the device response simultaneously occurs with just a small amount of input to output delay added by the speed of sound.

In headphones with Bluetooth, Lightning, or other unconventional digital audio interfaces, this loop is broken. The input and output are on two different physical devices, which do not share a sample clock, and the signal goes through one or more analog to digital conversion stages. The delay from input to output of the device is likely quite long, compared to classic analog headphones. In fact, the delay might effectively be infinite. In the case of Lightning-connected headphones, there is currently no third-party solution available for injecting a test stimulus into a Lightning port. In Bluetooth systems, the connection is intrinsically non-synchronous. Bluetooth does not provide a synchronous sample clock across the wireless connection and instead relies on asynchronous sample rate conversion and various other techniques to maintain a glitch-free audio stream. This is what we mean by “open loop.” A closed loop system has a closed loop, synchronous signal chain.

An open loop system does not have a continuous or synchronous signal chain. However, SoundCheck makes it possible to measure all conventional parameters of a device, even when those devices are open loop devices, with a variety of tools including:
• Triggered acquisition—support for capturing measurements on playback devices
• File analysis—the ability to analyze signals captured by recording devices
• Resampling—conventional asynchronous sample rate conversion
• Frequency shift—the capability to align signals between non-synchronous systems

Let’s explore how these tools are applied in some typical test scenarios.

Bluetooth Testing
Figure 2 shows a typical Bluetooth setup. Since we are testing the Bluetooth headset using a Bluetooth interface, it is nominally a closed loop scenario. The audio signal comes out of the analog interface and is transmitted via the Bluetooth interface to the headset. It is then played
by the headset and picked up by the ear couplers where it is returned to the analog interface and computer for analysis. However, what makes this an open loop test is that Bluetooth does not transmit a sample clock and, therefore, the receiver and transmitter are asynchronous.

In this case, we will use frequency shift to align or synchronize the stimulus and response waveforms. Frequency shift uses a stationary reference tone to precisely find the difference in sample rate between two waveforms. Once the exact difference in sample rate is found, one waveform is then resampled with reference to the other. Frequency shift enables precise, conventional measurements to be made on Bluetooth devices despite their asynchronous nature.

When compared to a conventional test, only two changes need to be made. First, a short, stationary tone is pre-pended to the stimulus signal (see the Sidebar article). Typically 1 kHz for as little as 250 ms, this signal provides the frequency reference that the frequency shift step needs to align the stimulus and response signals in an asynchronous test scenario. Second, a
post-processing, frequency shift step is inserted into the test sequence between the acquisition and analysis step.

The rest of the sequence is identical to a conventional headphone test sequence and all normal parameters including frequency response, THD, polarity, rub and buzz, and so forth can be measured.

Lightning Headphone Testing
Any device that does not provide an analog or digital input and output is intrinsically an “open loop” device from a test perspective. Headphones that use the Apple Lightning port for connection are considered open loop because Apple does not provide Lightning audio
output adapters. The only device that can currently play audio into a Lightning headset is an iPhone. Measuring Lightning headphones requires an iPhone or similar Apple device to be used to store and play back the test signal (see Figure 3). This creates several open loop testing
challenges. To test a Lightning connected headphone, we will use three specific tools: triggered acquisition, resampling, and frequency shift.

Again, our test sequence will use a short 1 kHz tone, pre-pended to the normal test stimulus but this time it serves two purposes. First, it triggers a record-only acquisition, so that the test is automatically triggered when playback of the test signal begins. It is also used as the reference tone for frequency shift. Also, if our playback device, the iPhone, is using a different sample rate to the audio interface, we may need to use a resampling step. Finally, frequency shift will again be used to synchronize the stimulus and response waveforms. After the response waveform is captured via a triggered acquisition step and has been resampled and frequency corrected, calculation of the desired measurement parameters can proceed as with any conventional headphone.

Pre-written test sequences for both Bluetooth and Lightning headphones are available at no charge from Listen’s website, www.listeninc.com.

Lightning Headphone Microphone Measurements
Since most headphones now also include a microphone, it is worth mentioning how the microphone on a Lightning- connected headset is tested. The test sequence and method
for this is a little more complex, although ultimately it is really just the converse of testing the earphones. Figure 4 shows a typical test configuration. The preparation of the test signal and the use of resampling and frequency shift steps are identical to testing the earphones of a Lightning connected headset.

The difference is that instead of playing back the stimulus through the earphones and using a triggered, record-only acquisition, the stimulus is instead generated using a calibrated speaker or mouth simulator and recorded on an iPhone. The recorded signal is then transferred back
to the computer hosting SoundCheck and analyzed using a recall step to import the waveform into memory from storage on the iPhone.

Conclusions
Bluetooth and Lightning interfaces add an additional level of complexity to testing that is not there with their analog counterparts. However, because the SoundCheck test system is completely agnostic about where the stimulus and the response waveform are generated and
captured, these tests can be carried out with relatively simple modifications to existing test sequences. In fact, it pretty much comes down to a simple modification to the stimulus signal and some additional post-processing steps prior to analysis—all of which are easily automated.
This enables easy characterization and measurement of Bluetooth, Lightning, USB-C, and future devices with advanced digital audio interfaces.

 

Preparation of the Stimulus Signal (sidebar)
In SoundCheck’s frequency-shift algorithm, a Fast Fourier Transform (FFT) is used to extremely accurately calculate the centroid of a stationary tone. The result of this calculation can then be used to align or synchronize two signals even if they are sampled at different rates. A short, stationary signal is necessary for the frequency shift algorithm to lock on to. This is easily achieved by pre-pending a 1 kHz, 250 ms sine wave to the stimulus signal. Since SoundCheck enables the creation of compound stimuli, this short, single-tone burst can be followed with absolutely any test signal (e.g., a Farina log sweep, noise, speech, or other non-sinusoidal
waveforms).
The short sine wave also serves as the trigger tone for triggered record, as is necessary for testing Lightning headphones. The trigger tone clearly identifies the start of the signal. Care must be taken to set an appropriate trigger level. If it is too low, ambient noise can cause false
triggering; too high and it will never trigger. The trigger level should be set so that it is above the ambient noise and below DUT output level. The Multimeter virtual instrument is an ideal tool for finding the optimal trigger threshold.

A typical stimulus signal for open loop headphone test is shown in Figure 1. This compound stimulus works for both Bluetooth headphones where the sine wave is used for frequency alignment and for Lightning headphones where it additionally serves as a trigger and reference for frequency shift.

 

Additional Headphone Test Resources

More about Bluetooth headphone testing

Headphone Testing main page

 

https://www.listeninc.com/wp/media/2018/03/VC_BT_and_lightning_headphones_article.jpg 1053 802 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2018-03-20 16:15:532025-08-27 14:35:02Practical Measurement of Bluetooth and Lightning Headphones

Smarter Measurements for Smart Speakers

March 20, 2018/in Article Reprints, Smart Device Article Reprints/by Zarina

In this article, we describe techniques to characterize the frequency response, output level, and distortion of the device under test to enable direct comparisons between Internet of Things (IoT) smart speakers and conventional speakers.

Author: Daniel Knighten (Listen, Inc) and Glenn Hess (Indy Acoustic Research).  Reprinted from the March 2018 issue of Audio Xpress.

Full Article

Smart Speaker Audio Performance Testing

Sources:

  • Knighten, Daniel, and Glenn Hess. “Smarter Measurements for Smart Speakers.” Practical Test & Measurement, Mar. 2018.

Main Themes:

  • Rapid Adoption & Market Growth: Smart speaker adoption is skyrocketing, with predictions exceeding 100 million units shipped by 2024. Audio quality is a key differentiator in this competitive market.
  • Unique Testing Challenges: Evaluating smart speaker audio performance presents unique challenges compared to traditional speakers due to the lack of direct input/output paths, voice activation, and reliance on cloud-based services.
  • Necessity of Objective Measurements: Objective measurements of frequency response, output level, and distortion are crucial for comparing IoT smart speakers to conventional speakers and ensuring consistent quality.

Important Ideas & Facts:

  1. Cloud-Based Operation: Smart speakers lack direct input/output paths, relying on internet services for audio playback and recording. This necessitates retrieving recorded signals from online platforms and uploading test signals to cloud music services.
  2. Voice Activation & Control: Testing requires overcoming the challenge of voice activation. This involves understanding each device’s activation phrase and recording time to ensure accurate signal capture.
  3. Sampling Rate Error: Asynchronous audio operation in smart speakers can lead to sampling rate discrepancies between the device and the measurement system. Algorithms are required to correct these errors and ensure accurate analysis.
  4. Test Signal Design & Analysis: Specialized test signals, such as stepped sine sweeps, are employed to evaluate frequency response and distortion. Analysis utilizes heterodyne filtering to extract fundamental and harmonic distortion products.
  5. Measurement Setup: The authors recommend adapting existing standards like IEEE 1329-2010 for speakerphone testing due to similarities in use cases. Measurements are ideally conducted in an anechoic chamber to minimize environmental interference.
  6. Future Research Areas: Further research is needed to develop tests involving dynamic signals like noise, modulated noise, and real-world speech and music. Evaluating activation phrase detection amidst noise and multiple talkers is also crucial.

Conclusion:

Developing robust and standardized testing methodologies for smart speaker audio performance is crucial for ensuring quality and driving innovation in this rapidly evolving market. Overcoming the unique challenges posed by cloud-based operation, voice activation, and asynchronous audio necessitates specialized test signals, analysis techniques, and measurement setups. Further research is needed to encompass real-world scenarios and evaluate more complex aspects of smart speaker performance.

Full Article

https://www.listeninc.com/wp/media/2018/03/AX_smart-speaker_Mar2018.png 404 300 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2018-03-20 16:10:372025-08-27 16:48:27Smarter Measurements for Smart Speakers

In-Vehicle Distortion Measurement

March 20, 2018/in Article Reprints, Automotive Article Reprints/by Zarina

In-vehicle loudspeaker measurements and distortion audibility articleAuthors: Zarina Bhimani, Steve F. Temme (Listen, Inc.), Patrick Dennis (Nissan Motor Co.).  Reprinted from the 2017 Loudspeaker Industry Sourcebook.

Steve Temme and Patrick Dennis discuss their research exploring test methods that help determine audible distortion and enable manufacturers to test sound equipment after it is installed. Configurations for measuring in-car audio are shown. Objective measurements are made and correlated with subjective analysis, and conclusions drawn as to the level at which music sounds distorted.

Full Article

 

Abstract

Although most automotive speaker manufacturers carry out thorough end-of-line (EOL) driver testing (in many cases, 100% of product), many automotive manufacturers do not test the speakers once they are installed. It is possible for a speaker to develop a fault through damage in transit, handling, or installation. Furthermore, the simple act of installing a loudspeaker into a car can result in vibration issues caused by mounting and other components in the car. Such issues can prove costly for automotive manufacturers. It is not uncommon for a car dealer to install a new set of speakers in a car if a customer complains about sound quality issues. It is, therefore, advisable for automotive manufacturers to invest in both incoming speaker QC and complete EOL testing of installed systems.

Automotive Audio Test Equipment

The test equipment for incoming QC and in-vehicle testing is similar to EOL production tests. In fact the test setup for incoming QC is practically identical to that used in driver manufacturing facilities worldwide. This simple setup consists of an amplifier to drive the speaker, a measurement microphone, and software to measure frequency response, distortion (particularly Rub & Buzz), and polarity. In-vehicle testing is implemented with similar equipment, but the setup differs in that the audio signal is transmitted from the measurement software via an audio interface to the auxiliary, Bluetooth, or USB input to the head unit.

The test signal is played through the speakers, and the signal is picked up by a centrally positioned microphone. Care must be taken in positioning the microphone to ensure that the path from speaker to microphone is not blocked by seats or other parts of the car’s interior. Usually the best position is on, or suspended above, the front seat arm rest.

A single measurement of frequency response and Rub & Buzz is usually sufficient to ensure that the audio profile measured in the car meets specifications. If there are discrepancies, each speaker can then be measured independently (including additional measurements such as polarity) to help identify the cause. Any microphones in the car (e.g., part of a voice control/ telematics system) can also be tested using the same equipment and the car’s own speaker to play the test signal).

A similar test setup can be used for R&D testing (e.g., for voicing the audio system to the car). This might include speaker positioning and equalization of the system for correct tonal and spatial balance including left/right (L/R) and front/back balancing. It may also be used for microphone positioning and directivity measurements and noise cancellation performance.

Full Article

 

More about SoundCheck for Automotive Audio Measurement

More about automotive distortion (Buzz, Squeak and Rattle, Impulsive Distortion) measurement.

AES Technical Committee on Automotive Audio

https://www.listeninc.com/wp/media/2018/03/image_LIS2017_in-vehicle_loudspeaker_measurements.jpg 189 144 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2018-03-20 16:07:112025-08-27 14:37:50In-Vehicle Distortion Measurement

Headphone Testing at Reviewed.com

August 20, 2016/in Article Reprints, Headphone Article Reprints/by Zarina
graphic showing Headphone Testing article about a visit to Reviewed.com

Headphone Testing article: A Visit to Reviewed.com

Author: Zarina Bhimani. Reprinted from the June 2016 issue of Voice Coil.

In this article we discuss headphone testing using SoundCheck at independent review site, Reviewed.com. Includes description of test lab, measurement methods and more.

Full Article in VoiceCoil Magazine (PDF)

 

Article text

A Visit to Reviewed.com

Reviewed.com, part of the USA Today network, carries out quantitative reviews on a wide range of products including appliances, headphones, cameras, televisions and more. Since the beginning, its reviews have been built on the principle of using standardized scientific testing procedures to examine the performance of products, and a proprietary scoring method to ensure a level playing field amongst all manufacturers. Recently, I met with senior scientist Julia MacDougall, toured the facility, and learned about its headphone test methods. I also received a demonstration of the company’s recently upgraded SoundCheck system.

The large brick building in Central Square, Cambridge, MA, is in a part of town renowned for its young startup culture and unconventional work environments, so it’s no surprise to see a ping pong table next to the large, glass-walled conference room. However, once you get beyond the main lobby, there is a labyrinth of test labs, each designed for testing a specific product. A room dedicated to camera testing features various test pictures on the walls, as well as 3-D models with many moving and rotating parts to evaluate the camera’s capture of movement. Another lab was filled with massive flat-screen televisions that were being tested for display performance, color measurement, luminance, contrast, and more. Perhaps the most impressive was the appliance lab, where staff get to do their own laundry while they work (in the interests of testing the washers) to scientifically evaluate the performance of the washing machines. Dishwashers, dryers, microwaves, ovens, and refrigerators are also tested there. Then, testers retreat to the floor above to write up product reviews for the company website.

 

The Audio Test Lab

The area that interested me the most was the smallest test area—the audio lab. Headphones are small and the test equipment is compact so a large room is unnecessary. Reviewed.com has been using Listen Inc.’s SoundCheck software since it first started looking for an objective way to test audio products back in 2007. Back then, SoundCheck was used for measuring mobile phones—smartphones were in their infancy and Reviewed.com was the first review website to measure the sound quality of a wide range of phones.

Reviewed.com’s audio test focus has changed over the years. Emphasis is placed on products customers want to know more about before buying, and the review focuses on the product most important to the customer. Since the smartphone market has matured and customer choice is driven by brand loyalty and the ecosystem over audio performance, Reviewed has moved on to testing other products. Headphones are one of the largest and fastest growing segments of the consumer electronics industry (in part, driven by the smartphone revolution), so now the audio test lab is primarily focused on headphones.

The audio test lab is a small, climate-controlled room on the ground floor of the building. It contains a computer with the SoundCheck system, a Brüel & Kjær Sound & Vibration Measurement A/S Head-and-Torso simulator (HATS), an amplifier to drive the headphones, speakers used for noise cancellation tests, and two SoundConnect microphone power supplies to power the ears of the HATS. The walls and the door are entirely covered in acoustical foam to acoustically isolate the room and minimize reflections. Other precautions have also been taken to ensure accurate testing. The HATS sits on a rigid rack mounted to the wall to prevent vibration. Initially, it was on a desk above the computer but the vibration from the computer fan interfered with the measurements. The Reviewed.com offices also have a more unusual noise issue to contend with. Due to its proximity to the local subway line, there is a low-frequency rumble every 5 minutes or so when a train goes by! Measurements are stopped or repeated if the train is not heard until too late.

 

Headphone Testing

Reviewed.com has been testing wired headphones for several years now, and has recently updated its setup to test the audio performance of wireless headphones for the same performance standards.

Figure 1 shows the test setup for a typical wired headphone. In-ear, over-the-ear, and on-the-ear headphones are tested using the same setup. The HATS is, as the name indicates, a device that replicates the acoustic behavior of a human head and body. The pinna is constructed to accurately replicate the average human ear, and behind the pinna is a very accurate measurement microphone representing the human eardrum. These microphones require 200 V polarization and are powered using SoundConnect microphone power supplies from Listen. When headphones are placed on the HATS, they must be placed as accurately as possible since small variations in fit can affect the test results. For this reason, four measurements are made on each headphone, and the best one is used for evaluation.

The SoundCheck software generates the test signal and receives and processes the recorded response. The test signal, a stepped sine sweep, is transmitted to the headphones via the audio interface headphone output of the amplifier. The sound is recorded by the microphones in the HATS and returned to the computer via the audio interface so it can be analyzed by the SoundCheck software.

Reviewed.com carries out six specific tests on every headphone: frequency response, distortion, tracking, leakage, isolation, and sound pressure level (SPL). The first three of these are the most important as they are the ones that have the greatest influence on the perceived sound quality.

Frequency response, distortion, and tracking are simultaneously measured using a stepped sine sweep from 20 Hz to 20 kHz. Figure 2 depicts a screenshot that shows the output from this test.

All measurements are then compared to standard curves to enable Reviewed.com to apply a numerical value to the data, which makes up the overall score. This enables unbiased and simple comparison between headphones, and these numerical values contribute to the device’s total score.

Audio Testing

Frequency Response – For measuring frequency response, recorded sound is compared to the original sound file to determine how the headphones have altered the sound. For consumer headphones, the frequency response is compared to the ISO 226:2003 equal loudness curve standard, which is the curve at which human ears hear notes at the same loudness. For studio headphones, limits are set at ±5 dB (SPL) against the response curve of the headphones. This means these headphones are not scored on the exact shape of the curve but rather how much the headphones deviate from these limits.

An objective measurement of distortion is obtained by measuring the total harmonic distortion (THD), a measurement of the distortion at every harmonic in addition to the fundamental. This is plotted and compared to a proprietary empirical data curve which represents Reviewed.com’s acceptable threshold, based on more than six years of headphone test results. Any measurements above this line have a negative effect on the score.

Tracking is a measurement of how the channels sound compared to each other. Ideally, the left and the right ears should sound the same. Both are simultaneously measured across a range of frequencies from 20 Hz to 20 kHz. Any difference of more than ±2 dB affects the score.

Other performance tests measure leakage, isolation, and maximum SPL. Leakage is an indication of how much sound escapes from the headphones. This is measured using a sound level meter placed precisely 6” from the ear. Initially, the ambient noise of the room is measured, pink noise is played back through the headphones at 90 dB, and the volume measured. A simple subtraction of the background noise from the measured noise offers a numeric leakage value that contributes to the overall score.

Isolation, the ability of the headphones to eliminate outside noise, is also measured using SoundCheck. The setup enables both passive isolation (i.e., isolation due to the mechanical structure of the headphone) and active isolation (i.e., the noise cancelling functionality) to be measured. Figure 3 shows the measurement when pink noise is played at 90 dB without the headphones on. Its is level measured across the frequency spectrum. The headphones are placed on the HATS, and the noise played again and measured so that the attenuation is calculated. In noise cancelling headphones, a third measurement is made with the active noise cancellation turned on. By subtracting active and passive noise cancellation curves from the unoccluded curve, the isolation can be numerically quantified. This is compared to the average values of hundreds of pairs of headphones to calculate their noise isolation score.  Last, SPL is measured. In this test, the volume of the stimulus signal is increased and the distortion analyzed until the peak THD reaches 3%, or the level of sound reaches 120 dB. There is no need to test higher than 120 dB as headphones are not intended to be played at that volume due to the risk of permanent hearing damage.

Wireless Headphone Testing

Recently, more and more headphones are being used in wireless mode, so Reviewed.com decided that it was important to test them under such conditions. (Until recently, wireless headphones were tested in wired mode.) The addition of a Bluetooth interface, the BQC-4148, to the test setup now enables wireless headphones to be tested exactly the same way as their wired counterparts (see Figure 4).

Instead of routing the test signal from the computer to the headphone via a headphone amplifier, it is routed via the BQC1448 Bluetooth interface. This small device connects to the computer via a USB, and is controlled via SoundCheck, where parameters such as the Bluetooth Protocol and transmitter power are set. It is paired with the headphones under test, and the signal is transmitted via the interface directly to the headphone. The recording and analysis side of the setup is exactly as before—the signal is transferred from the microphones within HATS to the computer via an audio interface and analyzed.

With this setup, wireless headphones are measured to exactly the same standards as wired headphones, so the score they receive is truly representative of the way they are commonly used. It is even possible to compare wired and wireless performances of the headphone by making the same measurement with both the conventional and Bluetooth setup.

In addition to the audio tests, the headphones are evaluated for comfort, control, and functionality. Specialty headphones (e.g., sports headphones) undergo additional testing, such as being worn on a long run to test for a secure fit in active conditions.

The Future

Mobile audio technology is evolving extremely fast. In the past 10 years, we have seen the smartphone revolution, the explosion of the headphone industry, the introduction of wireless headphones (in fact, wireless everything), the return of high-resolution audio, voice activated audio, and more. In addition, wireless homes are generating new audio opportunities (e.g., light bulbs that also function as wireless speakers). Reviewed.com will follow these trends, testing the hottest consumer products, particularly those where performance is a big differentiator.

The SoundCheck system is inherently flexible for testing any device, as it can support up to 64 channels of audio and there a range of interfaces enables Bluetooth, USB, MicroElectrical-Mechanical System (MEMS) microphones, and more to be tested. High-end audio interfaces permit accurate testing of high-resolution audio and the ability to custom-program virtually any test means the possibilities are endless.

This makes it a valuable tool for a constantly evolving product review site such as Reviewed.com, because the flexibility and forward compatibility of the SoundCheck system ensures that it will be capable of testing any audio device. This has already been demonstrated with the recent system upgrade to add the Bluetooth interface and update the software. As MacDougall, so succinctly explained, “We are very excited to use SoundCheck and the BQC4148 Bluetooth interface to broaden our headphone tests to include wireless headphones—it enables us to offer better, more relevant data to our readers.”

 

Curious to learn more ? Check out our main page about headphone testing.

https://www.listeninc.com/wp/media/2023/06/VC_Reviewed_article.jpg 758 578 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2016-08-20 18:01:022025-08-27 14:25:56Headphone Testing at Reviewed.com

Headphone Testing (part 2)

April 8, 2012/in Article Reprints, Headphone Article Reprints/by Zarina
Graphic showing headphone testing part 2 article from Voice Coil Magazine

Headphone Testing Part 2

Author: Brian Fallon.  Reprinted from the April 2012 issue of Voice Coil.

In part 2 of this 2-part series, Brian Fallon discusses the challenges and practicalities of measuring headphones with built-in electronics such as digital and Bluetooth headphones. He covers connectivity, frequency limitations, test signals, measurement units and specialty measurements such as noise cancellation.

Full Article

Note: This article was written a few years back and there have been many advancements in the SoundCheck software and other accessories for measuring advanced headphones.

Read the first few paragraphs of Headphone Testing Part 2 Article

Introduction
“Headphone Testing (Part 1)” published in the December issue of Voice Coil, covered the basics of analog headphone testing: correction curves and fixturing, choosing hardware (ear simulators and couplers), the different requirements for testing in R&D vs. production, and the various essential measurements such as frequency response and distortion.

Analog headphones are relatively straightforward to test because there are only two electro-acoustic transducers to measure. Headphones with built-in electronics, such as digital headphones (including Bluetooth and USB), and noise-cancelling headphones are harder to test because the electronics and transducers need to be tested together as a complete system. In this article, test considerations for such headphone systems and the practicalities of testing them are discussed.

Testing Digital Headphones
Headphones with digital connectivity add complexity to audio testing. In addition to testing the acoustic transducers, the digital circuitry must also be considered. The fundamentals of analog headphone testing (the use of artificial ear simulators and couplers, the principals of repeatability vs. realism, and the tests that characterize the device) are the same, but the test signals must pass through the headphone electronics, which can greatly influence the test results. The principal distinction of digital headphones is that they contain a D/A converter and often DSP circuitry as well as a headphone amplifier. This means that unlike an analog headphone, where measurements are being conducted only on the electroacoustic elements, the measurements for digital headphones are being performed on the whole system which comprises everything from the digital signal to the acoustic output of the transducers. While it is certainly possible to isolate and test each of these components on its own, it is also very important to understand the intricacies of testing the complete device.

Managing Connectivity
The initial challenge of testing digital headphones is managing connectivity. The test system must be able to communicate directly with the device. A software-based system is ideal because it can communicate directly through the computer’s USB interface to the USB headphone, which will appear in the operating system along with other audio devices. Test signals can be sent digitally and the acoustic signals can be analyzed synchronously. If a hardware-based system is used, an extra program is usually required to connect the test system to the device under test.

Bluetooth headphones, however, require an additional interface for the computer to connect to the device under test. This may be a hardware Bluetooth communication box or a simple Bluetooth dongle, either built into the computer or externally connected by USB (see Figure 1). Bluetooth interfaces cause transmission delays in the audio chain. The test system must be able to account for these delays in order to take meaningful measurements. Some test systems can use an autodelay algorithm that looks at the system’s impulse response to calculate the delay and remove it from the measurement, if necessary.

Frequency Limitations
It is also important to be aware of frequency range limitations when designing tests for Bluetooth devices. Bluetooth devices typically operate at low-sampling rates of either 8 kHz (narrow band) or 16 kHz (wide band). These sampling rates limit the frequency range (because of the Nyquist frequency) to significantly narrower than analog headphones or even USB headphones. For example, a Bluetooth device with an 8-kHz sampling rate will only play audio up to slightly less than 4 kHz. Such limitations need to be considered when designing the test specifications. It can also be interesting to test the Bluetooth device beyond its cut-off frequency to see how well its anti-aliasing filter suppresses out-of-band signals.

Test Signals
Bluetooth presents a further challenge in that sine waves are not always transmitted accurately. When this occurs, alternative stimulus signals must be considered. Broadband noise is one possibility, but because of noise suppression circuits in some devices, this may not be a practical solution. A multitone signal, where several frequencies are played simultaneously, is another option. This produces a very fast frequency response measurement and is immune to the sudden dropouts that can occur in Bluetooth transmission. The downside of this test signal is that traditional harmonic distortion cannot be measured. Yet another possibility is the use of speech or music signals. These real-world audio signals transmit very well over Bluetooth, but their downsides are that they typically require long-term averaging and cannot be used for harmonic distortion measurements. If distortion measurement is required, non-coherent distortion may be measured using any test signal. This technique compares the input and output power spectrums to measure the non-coherent power and calculate the distortion plus noise (see Figure 2).

Measurement Units
Traditional analog headphones are tested with a stimulus level that is rated in terms of voltage or power. The sensitivity is also specified in these units such as dBSPL / mW. When testing headphones with USB or Bluetooth connectivity the stimulus is simply a digital signal whose level can be expressed in terms of digital full scale. The sensitivity is, therefore, expressed in dBSPL/FS. Manufacturers sometimes choose to relate these signal levels back to voltage, which can be done if the characteristics of the D/A circuit are known. In such cases, the gain of the built-in headphone amplifier chip must also be accounted for. Another method used for relating these digital units back to the analog domain is through the use of a codec (see Figure 3). A-law and M-law are two codecs widely-used in Bluetooth applications that can translate the digital units into “virtual volts.” These codecs are most commonly used in telecommunications, especially for headsets.

Read the Full Article

Check out our main Headphone Testing page for up-to-date information on testing advanced headphones.

https://www.listeninc.com/wp/media/2011/12/VC_headphone_test_part2_article.jpg 1137 876 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2012-04-08 16:08:262025-08-27 14:27:34Headphone Testing (part 2)
Page 2 of 3123

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top