Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

Calculating Voltage for Target SPL

August 5, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono

Want to measure your speaker at a specific SPL but not sure what voltage to use? In this video, we’ll show you how to calculate the exact test voltage needed to hit your target SPL using a simple SoundCheck sequence.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Pre-written test sequence to calculate the voltage level for a target SPL. You can modify it to meet your needs or incorporate the steps into your own test sequence.

Video Transcript: Calculating Voltage for Target SPL

In an earlier video, I demonstrated how you can increment the test voltage level to see the frequency responses at various levels. But what if you want to run a speaker measurement at a specific sound pressure level and need to know what test voltage level to use? 

I’ve written a short SoundCheck sequence to do this – let’s take a look.

First, the  sequence asks the user to enter the desired target level in dB SPL. I’ll put 94dB as an example. It plays through a 1kHz sine tone and calculates the sensitivity, then  implements a post-processing step to obtain the voltage level needed to output 94dB at 1kHz. The sequence then displays the calculated voltage level and the sensitivity level. 

The rest of the sequence verifies this by running a stepped sine sweep using the calculated voltage level and outputting the frequency response. You will notice that at the 1kHz mark, it reflects the target level I input earlier, which is 94dB SPL. 

This demo sequence can be downloaded from our website if you want to try incorporating it into your measurement sequences. Check it out, and if you have questions, please contact the Listen Support team.

https://www.listeninc.com/wp/media/2025/08/Calculating-Voltage-for-Target-SPL-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-08-05 07:00:022026-08-27 14:10:26Calculating Voltage for Target SPL

Using Masking Curves for Measurement Insights

July 22, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono

Discover how masking curves in SoundCheck 23 bring psychoacoustics into your measurements with real-time tonal masking and threshold of hearing visualization – an industry first. In this video, we’ll show you how to use this new feature for production failure analysis and R&D insights by correlating what you see with what you hear.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Using Masking Curves for Measurement Insights

A great new feature in SoundCheck 23 is the introduction of real-time tonal masking and threshold of hearing curves in the spectrum analyzer—an industry first. This lets you visualize how a dominant tone audibly masks other frequencies for a visual correlation between what we measure and what we hear. Let’s take a look at how to use it.

In production, it can give a deeper insight into failure analysis. Here, I have a small micro speaker. These designs are notorious for having rub and buzz problems around resonance due to their single-point suspensions. Let’s run our test sequence and examine the results.

The upper XY graph shows the fundamental and the enhanced perceptual Rub & Buzz (EPRB) curve. There’s a strong EPRB component focused right around 600 Hz. In the lower XY graph, we’re plotting the EPRB curve along with the electrical impedance curve, and we can see a strong correlation between the defect and the resonant frequency of the loudspeaker. On the waveform graph, zoomed in around 600 Hz, we can clearly see how distorted the waveform is.

Now, let’s use the masking curve tool to investigate this defect further. I’ll open up a saved virtual instrument configuration that contains a signal generator and the FFT analyzer – the two tools you need to use masking curves.

The test level in our sequence was 200 milliVolts, but I’ll start the signal generator at 70 milliVolts and 600 Hz. At this level, a couple of harmonics are visible. Now let’s add our masking curve. We’ll add a calculation and select “Masking Curve” from the dropdown list. Our calculation is now a masking curve. Its name is calculation one and our operand is the FFT1 live curve. Now on our graph we can see our fundamental tone, our masking curve, and we can see that harmonics 2 and 3 are well below the masking curve, suggesting they should be inaudible.

But now, watch what happens as we increase the test level. Around 150 mV is when perceptual Rub & Buzz really takes off. Now nearly all harmonics above the fifth up to the 20th or so are above the masking curve. Now when we bring this up to our final test level of 200 mV, nearly every harmonic up to the 30th is touching or above the masking curve, so we’d expect this to sound pretty bad. Let’s take a quick listen… and as we would expect, we can hear a lot of distortion.  

Finally, I’m going to remove the cursor and increase the frequency up to the point where the measured EPRB in our sequence should drop down. It’s doing some averaging, lets wait for it to settle. Now we can see at 800 hertz things have calmed down quite a bit. There’s still some visible harmonics but they’re pretty much at or below the masking curve. Let’s take it up to a kilohertz, now all our harmonics are below the masking curve and we should have a nice pure tone when we listen to it. 

So there’s a look at how one might use this new feature for failure analysis on a production line. It also has R&D applications, such as monitoring the effects of component size and quality during product development—for example, the contributions of the voice coil and magnet system to harmonic distortion. To learn more, check out the SoundCheck manual.

https://www.listeninc.com/wp/media/2025/07/Masking-Curves-Blog-TN-1.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-07-22 07:00:342026-08-27 13:58:46Using Masking Curves for Measurement Insights

How to View Frequency in the Time Domain

July 8, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono

Curious how to view frequency directly in the time domain? In this video, we demonstrate how to use SoundCheck’s new Stimulus Frequency Cursor to pinpoint the frequency of transient events on recorded waveforms.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: How to View Frequency in the Time Domain

Today, I’m going to show you how to use SoundCheck’s Stimulus Frequency Cursor. This is a new feature we introduced in SoundCheck 23 that lets you see the exact frequency of any transient event on a recorded time waveform.

This feature can be used with:

  • Frequency Stepped Sweeps/Stweeps 
  • Frequency Log Sweep
  • Log Amplitude Sweep
  • Two-tone options
    • Intermodulation
    • Difference Frequency
  • Loose Particle and Enhanced Loose Particle Waveform and Time Envelopes

Here I have a short sequence I’ll use for demonstration purposes. The first part uses play and record acquisition and harmonic track analysis, and the second part recalls some enhanced loose particle waveforms.

Let’s start the sequence and take a look at our recorded time waveform. We can see in our table here that the record delay is 1.11 milliseconds and we can clearly see that down here in the waveform graph. Let’s expand this graph so we can look at this new feature.

Now one thing that’s important to know when you’re using this feature, is that delay compensation must be added to our waveform. If I try to enable the stimulus frequency cursor now, you can see that it’s grayed out.

So, I’ll just add delay compensation in our analysis step…  you can see here on the delay tab there’s a new function called “output auto-delayed waveforms” so I’ll select this and apply. If you keep your eye on the memory list and you’ll see a new waveform appear with the name “auto delayed recorded time waveform”.

Let’s bring this over to our waveform graph, and we can see this has essentially moved the start

of the recorded time waveform to time equals zero. Let’s remove the original one. Now we’ve done that, I can drop my stimulus frequency cursor onto this recorded time waveform. We can now see that we have the time and magnitude coordinates for our auto-delayed waveform, and here we have the frequency value. You can see these values changing as I drag the cursor across the waveform. 

Now let’s take a look at how we can use the stimulus frequency cursor with loose particle analysis. We’ll continue running the sequence and it’s going to recall a previously recorded time waveform and perform an enhanced loose particle analysis on it.

Here we’ve got the recorded time waveform and down below is the enhanced loose particle waveform. 

Let’s add our stimulus frequency cursor to the enhanced loose particle waveform. You can see that it’s already enabled – that’s because by default the ELP waveform is already delay compensated so we can jump right in and enable our stimulus frequency cursor and see the readout here. I can also use some of the other cursor functions like snap to max to see where the largest transient is on the graph – it’s telling me it’s at 200 hertz. Again, I can drag the cursor and see the frequencies change… we can see just by looking at it that the largest concentration of loose particle transient events occurs between 132 hertz and 250 hertz so that might help us understand a little bit more about the behavior of the loudspeaker.

So, that’s how we use the stimulus frequency cursor. If you want to learn more about this feature, check out the SoundCheck manual, or ask your sales engineer.

https://www.listeninc.com/wp/media/2025/07/Frequency-Time-Domain-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-07-08 11:44:392026-08-27 14:22:14How to View Frequency in the Time Domain

Auto-incrementing Signal Test Levels in SoundCheck

June 24, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono

Explore how to automatically increment signal test levels using SoundCheck’s loop functionality. This technique is perfect for displaying measurements across a range of signal test levels, determining voltage-to-SPL relationships, or assessing distortion once a target level is reached.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Auto-incrementing Signal Test Levels in SoundCheck

SoundCheck’s loop functionality offers a lot of flexibility, for example you can use it with sequence logic for pass/fail or yes/no scenarios, or to run tests in a loop and perform statistical analysis. 

However, one of my favorite applications of this feature is for auto-incrementing the test signal level. This is useful, for example, to display measurements across different test signal levels, to ascertain the  voltage required to achieve a specific sound pressure level or to measure distortion of a device once a desired sound pressure level is achieved. 

In SoundCheck, when you create a loop, a memory list value called “loop index” is created and the steps are indented  in the sequence editor. 

In the step configuration window we can control the level at which the tests starts, and the increment amount. Here, I’ve  set it to start at 100mV and increment in 100mV steps. This loop runs a total of 5 times and I have a table to reflect the test level for each cycle. 

Now, let’s make sure our stimulus is using our incremental level. Open the stimulus step, and select “Memory List Selection” in the “level” section. Click on the dropdown and navigate to “loop index”, and change the axis to the Y-axis selection. You may get a prompt after doing this to disable the preload stimulus when using a memory list selection to control your test level. We do this by unchecking the “Preload Stimulus” option in the  “Overall Sequence” configuration. 

Now let’s run the sequence… 

This table here displays the test level at every loop and our frequency responses, THD measurements, and recorded time waveforms are displayed for all 5 test runs. 

Check it out, and if you have questions, please contact the Listen Support team.

https://www.listeninc.com/wp/media/2025/06/Signal-Test-Levels-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-06-24 05:00:222026-08-27 14:18:19Auto-incrementing Signal Test Levels in SoundCheck

Troubleshooting Hardware with Self-Test Sequences

June 10, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
The first thing you should do when getting unexpected audio measurement results is run a self-test sequence. In this video, we’ll walk through how these sequences confirm that your audio interface is correctly configured by analyzing frequency response, sensitivity, and latency.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Troubleshooting Hardware with Self-Test Sequences

The first thing you should do if you’re getting unexpected audio measurement results, is run a self test sequence to make sure the audio interface is correctly configured. These sequences send a test signal through the output and compare it with the signal received in the looped back input. If the frequency response, sensitivity, and latency are as-expected, it is configured correctly.

You can find hardware self-test sequences in SoundCheck’s Sequences > calibration folder.

For each type of Listen hardware, there is a specific sequence that automatically routes the signal back from output to input. If you are using third party hardware, you can use the generic self test sequence. This one requires you to physically loop back inputs and outputs.

Let’s take a look at the AmpConnect 621 Self Test sequence. It includes a PDF that explains how the sequence runs and what expected results are.

You can see here I have the AmpConnect 621 connected and configured in my Listen hardware editor. SoundCheck automatically reads the Vp values and calculates the latencies for Listen Hardware.

If you’re using third party hardware, it is possible for these values to be set incorrectly, so the voltage going out is not what is accounted for or the latencies might be incorrect.

Let’s run the self-test sequence. It is going to give me some instructions.

It’s automatically switching the signal paths, testing all of my inputs and outputs. And the end result gives me a pass or fail to confirm if my interface is working correctly or not, as well as all the test results.

Here we see that the frequency response looks good, my latencies are correct (just off maybe a little), and my noise spectrum and the amplifier response also look good.

If my self-test had failed, for example the sensitivities or latency were wrong, I’d need to recalibrate the hardware input, import in the calibrated hardware files, and do some additional troubleshooting.

If you’re using a WDM driver for your interface, it’s also important to check the Windows volume mixer is set to 100%.

This can also be checked in the Playback and Recording tab of the sound settings. Make sure the levels are set to 100%, and any Audio Enhancements and Spatial Audio are disabled. Note that this is only applicable for WDM or WASAPI devices, as ASIO devices don’t go through the Windows mixer.

Once you’ve confirmed your audio interface is correctly configured, you can move on and troubleshoot the rest of your signal chain – the cables, speakers, microphone etc.

https://www.listeninc.com/wp/media/2025/06/Troubleshooting-Self-Test-Sequence-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-06-10 05:02:262026-08-27 14:19:02Troubleshooting Hardware with Self-Test Sequences

Advanced Bluetooth Settings in SoundCheck

May 27, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Looking to access advanced Bluetooth functionality in SoundCheck? This video demonstrates how to enable features like ‘man-in-the-middle’ connections and AVRCP volume control using command line tools for supported devices.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Advanced Bluetooth Settings in SoundCheck

While SoundCheck’s built-in Bluetooth message steps address the majority of use cases, there are some additional controls for specific applications, such as ‘man-in-the-middle’ connection or controlling AVRCP volume. You can access these from the command line. Let’s take a look.

If you haven’t already installed the driver for your bluetooth device, you’ll need to do this first. Make sure you select the correct driver for your device. I already have my driver located here on my local C-drive.

I am using a BTC4148A, so I will use the command name “btcutil”. This name depends on your device so check the documentation for your device to make sure you are using the appropriate name. 

Copy the file path, and now  let’s run it from the command line. 

To view the current settings, you can either use the command “–list” or “/l”.

A list of available commands is in the documentation, or you can use the command “–help” or “/?”. These are all the commands available to use with the device.

Now let’s enable  “Man in the Middle” using the command line utility. If we check the current status, we can see it’s set to zero, or off. Now I’ll switch it on using the command “/mm ON” and if we go back and check the settings again, you can see that it’s now set to 1 which means this function is now enabled.

Another useful tool is controlling the AVRCP volume. This lets us control the volume of a paired bluetooth speaker.

I’ll use the query command for the interface to scan for bluetooth devices. And I’ll set it to run for 5 seconds. 

The interface has discovered my Bluetooth speaker so I’ll copy the Bluetooth address and pair it. 

Now you can see it is paired, and we can change the AVRCP volume using the command “/av” and setting the volume between zero and 15, let’s set it to 10.

And, if we check the configuration, you can see the AVRCP volume is now set to 10.

So that’s how you can gain control over additional Bluetooth functionality through the command line. Give it a go, and contact Listen support if you need any additional help.

https://www.listeninc.com/wp/media/2025/05/Bluetooth-Settings-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-05-27 07:00:212026-08-27 14:17:11Advanced Bluetooth Settings in SoundCheck

Quickly Analyze Data with Offline Processing

May 13, 2025/in Blog, SoundCheck Tips Videos, Uncategorized/by Julius Wijono
Quickly explore new analysis options without modifying your original sequence. Learn how SoundCheck’s Offline Processing tools let you run individual steps manually, generate protected data, and easily compare results.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Quickly Analyze Data with Offline Processing

In SoundCheck, there might be times where you want to further process data that’s already captured. This could be from a sequence run or even data that was acquired on a completely different computer.

For example, in this sequence here,I ran an acquisition and got a frequency response with a time selective response. I might want to change some settings, and I might want to manipulate this data further. I could go into my analysis step and make changes, or  drag in additional post-processing. But if I’m just trying to investigate, I might not want to change the sequence that I’ve been using.

Here we can use the Offline menu. This lets us run any step in SoundCheck, but instead of in a sequence, we just run it manually.

So when I open up Offline Analysis, I can choose any step templates that are available in my Sequence Editor. Lets choose Time Selective Response analysis, and it  opens up the editor.

Now I can manually manipulate this, choose whatever settings I want, and then when I apply these settings, it will create protected data in my memory list with these settings. So here, I’ll configure my step, and pick my stimulus and response waveform. Now let’s say I want to see how this would look with a different windowing time. I just type in the new value here, click Apply, and this data is populated to my memory list as protected data.

I can view this alongside the measured data in my sequence to see what the changes would be. And I can keep doing this— every time I make a change and click Apply, I’m going to get additional protected data. It’ll be added to the memory list, and I can go through, quickly view these, and see which setting I want.

This is also useful for additional processing. If I close this step, I can delete the data I captured over here from the memory list, and I can process this curve further. Instead of changing a step that I already ran in the sequence, I can add in a completely new step.

For example, If I want to see the maximum value on this curve, I can open up a Post-Processing step… look look at the Maximum template…. choose my Fundamental, and when I click Apply, it’s added to my memory list, and I can view it on this table here.

The Offline menu gives a very quick and easy way to add new measurements and further process your data from a single menu without needing to write an entire sequence. 

https://www.listeninc.com/wp/media/2025/05/SoundCheck-Offline-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-05-13 08:00:172025-05-12 10:56:37Quickly Analyze Data with Offline Processing

Using the Equation Editor in SoundCheck

April 29, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Need to run custom equations in your test sequences? In this video, we show you how to implement complex formulas directly into your sequences using SoundCheck’s Equation Editor.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Using the Equation Editor in SoundCheck

In this video I’ll show you how to use the equation editor in SoundCheck. This optional module lets you add any custom equation as a post-processing step so you can use it within a sequence. For example, you might want to apply a complex formula from a technical paper or a specific standard to your data.

Let’s look at how it works. I have a simple example here on my right side. I have three input variables: A = 1, B = 2 and C = 3, and I have three equations to solve for X, Y and Z. And here I’ve calculated the values of X, Y and Z.

If you were to calculate this in a sequence without using the user equation editor, it would take almost 10 steps just to solve for X, Y and Z.

Let’s now implement this using the user equation editor.

I’ll create a new sequence,  and insert three operator numeric steps, A, B and C. 

I’ll initialize the values of A as 1, B = 2 and C = 3. Next I’ll add a user equation post-processing step. This opens up in two separate windows, one where we define the input and output values, and the second where we write the equation. You can always access context help while you’re doing this by hovering over a particular field.

I’ll start with the operand on my left side here. I’m using A, B and C as my input operands. These will be referred to as A0, A1, and A2 when I’m writing the equation. Next I’m going to write the actual equation in this post-processing window here 

X equal to A0 to the power of 2, plus  2 A0 A1  followed by a semicolon.

You can see this automatically creates the output value of X.

Now let’s write the second equation 

Y equals X log X plus A2, followed by semicolon

Now for the third equation…

Z equals the square root of XY, again followed by a semicolon.

If you need any help writing equations, appendix 9 in the manual shows all the available functions and how to use them inside the equation editor.

Since our input values are contained in the y-axis we don’t really need to show the x-axis in the outputs, and we know the units are linear so I’ll change that in my output and that’s it.

Now let’s run the sequence. I have a= 1 b= 2 c = 3 and I get the values for x y and z, and we can display these on a table.

So, as you can see, it’s easy to implement complex mathematical functions and formulae into your SoundCheck test sequences. This lets you do all the calculations you want on your data automatically, without leaving SoundCheck.

https://www.listeninc.com/wp/media/2025/04/User-Equations-Editor-Blog-TN-1.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-04-29 11:11:292026-08-27 14:21:41Using the Equation Editor in SoundCheck

Advanced Limit Settings in SoundCheck

April 15, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Take your pass/fail criteria to the next level with advanced limit settings in SoundCheck. In this video, we explore precision tools like floating X-axis limits, failed point curves, and detailed interpolation controls to help you fine-tune your measurement accuracy.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Advanced Limit Settings in SoundCheck

Today we’re going to look at some advanced limit setting options available in SoundCheck.

Let’s open up the limits editor. This is where you set Pass / Fail limits for your measurements.

The Data tab is where you enter your upper and lower limits and the specific data that the limits are to be applied to. In the Parameters tab you can set your method for aligning limits, you can read about all these options in the manual so I’m not going to review that now. Instead, I’m going to focus on the advanced parameter options, there’s some really useful functionality in there. 

We’ll just click on this ‘Advanced View’ checkbox here… and we get some additional useful controls.

The “Absolute Comparison Precision” field lets us set the number of decimal places for the limits, which affects the pass/fail margins. For example, say I have a curve with a limit of 80 deeBee set at 13.2kHz. If my data precision is set to 2, it sees my measurement to 2 decimal places and we can see it’s 80.18 deeBee which exceeds my 80 deeBee limit and it fails. If I now change that data precision to 0, that’s no decimal places, my 80.18 deeBee reading is now rounded down to 80 deeBee which is right on the limit so it passes. This gives you very tight control over your pass and fail limits.

The Mapping section controls linear versus log, as well as floating limits in X. This setting determines the interpolation of the data to the limit curves if it is linearly or log spaced. 

In this example, I have a curve with an upper limit on. I expect the result to pass but it does not. Let us find out why…

We’ll use a neat feature called “Output Failed Point Curves”. When you enable this, it generates additional curves showing exactly the points that failed in comparison to the upper and lower limits. You can also view these failed points in a table to see precise numerical values, and we see that the failed point was at 125Hz. 

Looking back in the limit step, we see that 125Hz has a value of 1.370%, and if we use simple linear math, the upper limit at 125Hz is 1.375%. So why didn’t the limit step pass? This is because we are making linear calculations of the upper limit, but the limit interpolates on a logarithmic scale as the x-axis displays the frequency domain, which is normally shown logarithmically. If we switch the mapping option to linear, the data is below the upper limit, and it passes. Let’s just zoom in and take a closer look…

Float limits in X allows limits to float back and forth along the X-axis for the best fit. This is useful if you’re applying limits to curves with sharp peaks and dips due to reflections for example. You also have control of the step size increments, and the maximum and minimum percentages that the limits can float. 

For example, I have a curve with a peak and I’d like the shape of the limit curve to match the shape of this peak, but apply it at the frequency where my new peak is. I’ll switch to my new curve, and when I apply the floating limit, it shifts to best fit the new curve peak. Notice that only the X-axis has changed and the Y-axis remains the same. 

I hope you found this demo of advanced limit setting features useful. Please check the SoundCheck manual for further details.

https://www.listeninc.com/wp/media/2025/04/Advanced-Limit-Settings-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-04-15 08:00:132026-08-27 14:09:54Advanced Limit Settings in SoundCheck

Live Curves and Static Curves in SoundCheck

March 18, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Learn how to combine live curves and static curves in SoundCheck for real-time analysis and comparison! This video covers everything from visualizing live FFT data to performing mathematical operations on live curves and static curves, like subtraction and averaging.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Live Curves and Static Curves in SoundCheck

In this video, I’m going to show you some options for plotting different types of curves in SoundCheck. Specifically, I’m going to show you how to combine static and live curves on the same graphs. This is useful for example, for tuning applications or comparing a live curve to a target curve.

Many of the curves we encounter, for example, the fundamental curve, are static.

However, SoundCheck’s multi-instrument spectrum analyzer and the RTA allow us to visualize  live curves which change with time.

You can see here, for example, if I play a sine tone on my signal generator, I can capture it with my microphone and you can see the live FFT curve here. This green dot next to it here in the memory list indicates that it’s a live curve.

You can plot live and static curves separately, or together.

For example, if I want to add the static curve to this graph here with the live curve, all I need to do is drag and drop the fundamental curve from the memory list onto the graph.

Similarly, I can also drag and drop live curves on an existing or a new display.

You can also do calculations involving both static and live curves, including subtraction, addition, and power average, and you can also find maximums and minimums. Here, I’m going to add a new calculation module that subtracts two curves to find the difference between a live measurement and a target curve.

On the RTA, I’ll add a subtraction function, then I’ll select my live curve… and my static curve. Now you can see my graph is showing the original RTA and the memory list static curve. And we also display a new calculated curve which is the difference of the RTA and the static curve.

There are other mathematical operations that can be implemented on static and live curves, for example addition and power average, and these can even be used in test sequences. Check out the SoundCheck manual for more information.

https://www.listeninc.com/wp/media/2025/03/Live-and-Static-Curves-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-03-18 05:00:152026-08-27 14:24:20Live Curves and Static Curves in SoundCheck
Page 2 of 41234

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top