Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

Production Line Audio Test Seminar

September 18, 2024/in Blog, Production Videos, Seminar Recordings/by Julius Wijono

End-of-line audio test is critical to ensure product quality. Good production line audio measurements involve identifying the correct measurements, carefully selecting equipment, and accurately configuring and optimizing tests. In this 45-minute long seminar, Steve Temme and Mark Latshaw share valuable tips and tricks to ensure a smooth transition from the R&D lab to large-scale manufacturing. Topics include: end-of-line measurements, test equipment, calibration, optimizing your measurements, setting limits, saving data, factory control, test specification and security and more.

Production line audio test topics include:

  • What to measure: the basic production line electroacoustic measurements and what they tell you
  • The equipment – the software, hardware, and test fixtures you’ll need to make audio measurements
  • Optimizing your test – limit setting, optimizing your test speed and resolution, ensuring accuracy and more
  • Integrating your audio test with the overall test environment – database integration, python control etc.
  • Test specification and security – ensuring that your tests are run exactly as you intended.

Presenters: Steve Temme, Mark Latshaw
Duration: 45 Mins

Production Line Audio Test Resources

This seminar was originally broadcast on September 17th 2024. The recording above does not include the live Q&A at the end for attendee confidentiality reasons. However, several links to additional resources were provided during the Q&A session, and these are provided below.

  1. Transitioning Audio Tests from R&D to the Production Line An article originally published in the March 2023 issue of AudioXpress.
  2. End of Line Distortion Measurements An article originally published in the 2022 Loudspeaker Industry Sourcebook.
  3. Why Standardize on SoundCheck for Production Line Audio Test? Webpage highlighting the benefits of SoundCheck for production testing.
  4. SoundCheck for Production Line Audio Test Need the executive summary? Or need to convince a busy person to take a look at SoundCheck? This short video sums it all up in just 5 minutes.
  5. Using a barcode reader with SoundCheck A short video demonstrating use of a barcode scanner to input data into SoundCheck.

SoundCheck for End-of-Line Test

Check out our main SoundCheck page for more information.

 

https://www.listeninc.com/wp/media/2024/09/production_seminar_still.jpg 1190 2105 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2024-09-18 11:25:362026-08-28 14:53:19Production Line Audio Test Seminar

Signal Generator Secrets

September 10, 2024/in Blog, SoundCheck Tips Videos, Uncategorized/by Julius Wijono

Unlock the hidden potential of SoundCheck’s Signal Generator! From keyboard shortcuts to saving custom frequency favorites, we’ll be exploring some of the lesser-known features and capabilities of this virtual instrument.

Additional Resources for SoundCheck’s Signal Generator

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Learn more about SoundCheck’s virtual instruments.

Learn more about enhancements to the signal generator in SoundCheck 22.

Video Transcript: Signal Generator Secrets

In this SoundCheck video tip, I’ll demonstrate some of the lesser-known features of the Signal Generator virtual instrument. Many front panel features are obvious, like the signal type dropdown selections, level and frequency fields, signal path selections, and the sample rate selector. But let’s explore some hidden features. 

Did you know you can increment the frequency and level values from your keyboard? Pressing the F8 function key highlights the level field. Press it again, and it highlights the frequency field. On the level field, the Page Up and Page Down keys increment the level in 1dB steps. Press F8 again to move to the frequency field. Page Up and Page Down increment the frequency in 1/24 octave steps.

You can set the maximum and minimum output levels and frequencies using these sliders to limit the range of the signal path. This stops you from damaging your speaker with too much voltage or a frequency outside of its passband. Frequency and Level can also be controlled using a USB knob, such as this Drok knob.

Here’s another neat trick: right-click on the frequency numeric field to instantly set a 1 kHz frequency. You can also save and ‘favorite’ specific frequencies. You can see I’ve already saved 345 and 550 Hz. If I now want to also add 268 Hz, I can just add it, and it’s now available in the list. You can also quickly access standard octave frequencies based on the ISO preferred frequencies.

When I change the signal type to noise, the interface changes. You can control the minimum and maximum frequency of the noise, and this checkbox inverts the signal phase by 180 degrees.. You can also apply equalization, if it’s available on your signal path,  by checking the EQ checkbox. The noise frequency resolution defaults to 1 Hz, and you can play it continuously, for a specific duration, or a set number of times.

For waveform playback, the interface shows both peak and RMS values. If we load a multi-channel wav file, we can select any channel and get additional information, such as whether it’s mono, stereo, or multi-channel, along with the sample rate and bit depth. Also, note the play start and end control that allows you to play a portion of a wav file or waveform. 

At the bottom, there are controls for saving settings so that your configurations can be recalled at any time. You can set your favorite configuration as the default so the generator always opens with these settings, and use the “Save to Memory” button to save the current generator level into the memory list for easy recall.

Lastly, you can minimize or expand the generator, which is useful when you are using multiple generators and need to save screen space. That’s a quick demo of some lesser-known features of the Signal Generator. I hope you learned something new today!

https://www.listeninc.com/wp/media/2024/09/Signal_Generator_Blog_TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2024-09-10 09:00:302026-08-28 09:04:21Signal Generator Secrets

How to Save Virtual Instruments Configuration Files

August 27, 2024/in Blog, SoundCheck Tips Videos/by Julius Wijono

Easily launch multiple virtual instruments in SoundCheck with just a click or a sequence step! In this tutorial, we will demonstrate how to save your virtual instruments configurations as .vic files and seamlessly recall them whenever you need.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: How to Save Virtual Instruments Configuration Files

In SoundCheck, do you know you can save time launching multiple virtual instruments with a simple click or step in a sequence? 

In this example, I have three virtual instruments; a signal generator, a multimeter, and a multi-instrument that I want to recall in the future. 

To save this configuration, go to Instruments > Save Configuration As and it will be saved as a .vic file. 

This saves not only the combination of instruments you have created, but also the settings in each instrument. 

Loading .vic (from instruments) 

I can then recall this configuration by going to Instruments > Open Configuration and all the virtual instruments will appear. 

You can also open configurations used recently under “Recently opened configurations” 

Loading .vic (sequence editor) 

I can also recall the configuration in a sequence as an acquisition step. Click and drag the virtual instrument acquisition step in the sequence editor into your sequence steps and double click on it. 

Right click and select “Load Configuration file” and select the desired file you wish to import. 

When you run the sequence, the virtual instruments will be displayed. 

Edit > Preferences > Launch OR Instruments > Startup

Virtual instrument configuration files can also be set to launch automatically when starting up SoundCheck. You can enable this two ways: From the Edit > Preferences window under the launch tab where you can select the configuration file in the dropdown menu OR from the Instruments > Startup Menu

https://www.listeninc.com/wp/media/2024/08/VIC-Files-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2024-08-27 10:02:492026-08-27 14:17:45How to Save Virtual Instruments Configuration Files

Using Barcode Scanners With SoundCheck

August 13, 2024/in Blog, SoundCheck Tips Videos/by Julius Wijono

Quickly input serial numbers, lot numbers, and more by integrating a barcode scanner with SoundCheck. In this video, we demonstrate how easy it is to set up and use.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Using Barcode Scanners with SoundCheck

Integrating barcode scanners with SoundCheck allows you to quickly input serial numbers, lot numbers, and other device and test information. Let me show you a quick demo.

Let’s plug my USB barcode scanner into my computer. It shows up as a standard input device. It’s plug and play, and once it’s connected, it’s ready to use. Instead of typing in the serial number, I can now use my barcode reader to capture the serial number on my device, lot number, or test stand location.

It can also be used in a test sequence. Here I have a sequence that stores the serial number, firmware version, and test stand location as metadata. When I run the sequence, It prompts for my device barcode, which is the serial number … barcode scan … lot number … barcode scan … then the chip barcode, which is the firmware version, … barcode scan … and test stand location.

Next, the test runs. Here, we’re measuring the frequency response, impedance, and THD.

Now, let’s check the metadata. When I click the result in the memory list, you can see the serial number, firmware version, and test stand location that we captured using the barcode scanner.

https://www.listeninc.com/wp/media/2024/08/SoundCheck-Tips.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2024-08-13 01:30:582026-08-27 14:05:57Using Barcode Scanners With SoundCheck

How to Lock Display Windows on SoundCheck

July 30, 2024/in Blog, SoundCheck Tips Videos/by Julius Wijono

Ensure your display windows remain intact during sequence editing and runs by using the display lock feature. In this video, we demonstrate how to lock and unlock your display using the padlock icon in the memory list.

Additional Resources for SoundCheck

Detailed explanations of how to configure your SoundCheck display can be found in the SoundCheck manual.

Video Transcript: How to Lock Display Windows on SoundCheck

If you want your current display configuration to remain intact during sequence editing and sequence runs, you can lock it. When a display is locked, the layout cannot be changed in any way. Simply click the padlock icon in the memory list to lock and unlock the display. The padlock is green when the display is unlocked and red when locked.

The display lock affects all displays in all sequences. Display elements cannot be closed or resized, and the minimize and maximize buttons are removed from the display headers. New displays can be opened, but any changes to the displays are not saved.

This prevents you from closing the displays and is useful for maintaining your layout during editing and testing. The lock is always on for Technician and Operator access; only users with Engineer level access have the option of toggling the lock on and off.

For more information, refer to the memory list display menu section of the user manual or visit our website.

https://www.listeninc.com/wp/media/2024/07/Display_Windows_Blog_TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2024-07-30 09:45:042026-08-27 14:12:11How to Lock Display Windows on SoundCheck

Setting Production Line Audio Test Limits: 3 Methods and 4 Useful Tips

July 19, 2024/in Blog/by Julius Wijono
Photo showing audio test limits on the production line

Audio test limits can be set compared to a golden unit, a statistical average or a perceptual method with a flat line limit.

Audio test limits are perhaps the hardest part of production line testing, but it is critical that it is done correctly. If the limits are set too wide, bad units may get shipped to unhappy customers. If the limits are too narrow, good units may fail and production yields may suffer. There are several different ways of setting production line limits.

3 Methods for Audio Test Limit Setting

Compare to a reference standard, or golden unit.

With this method, an ideal speaker, or ‘golden unit’ is selected, and all measurements are compared to how this speaker measures on any given day. This means that the test environment, temperature, humidity, measurement chamber and test jigs have no influence on the measurements since they are all relative to the reference standard. A Golden sample must be carefully chosen – often it is the best fit to average from a good batch. The method of choosing, as well as how to handle any changes in the sample should be well documented to ensure consistency. Samples must be carefully stored, and re-measured periodically, for example at the beginning of every batch or shift. The disadvantages to this method are that the reference loudspeaker can deteriorate and drift over time, and after a while it needs to be replaced with a new reference loudspeaker. 

Compare to a statistical average

If you choose to compare your speaker to a statistical average, a number of approved samples are measured, and those measurements are used to set absolute limits. Once limits have been set, the samples are not re-measured. This is simpler than using a Golden Unit as there is no need to continuously re-measure, but the environment must be well-controlled and test tools and measurement equipment well maintained since any change in these will affect the absolute measurements. Setting absolute limits is not straightforward, and a significant number of speakers, all conforming to specification, is required. For each performance characteristic (except rub & buzz and loose particles), the average, standard deviation, and the Ppk for the batch of speakers must be calculated. A good starting point for all curve limits, apart from rub & buzz, is the mean curve ± 3 sigma or standard deviations. Distortion limits are a little different. For THD, a +5 sigma limit is a good starting point. Rub & Buzz limits should be  set manually to levels such that they always reject audible distortion or some maximum acceptable level of audible distortion depending on the application and price point of the product. For example a lot more distortion is acceptable in a micro speaker than a high end loudspeaker.

Absolute flat-line limit for Perceptual Methods

It’s simple to set audio test limits with perceptual distortion methods. Limits are based on audibility, which is constant regardless of frequency and even product. For perceptual Rub & Buzz measurements, the limit is a flat line at the acceptable audible distortion level. In the case of transient distortion, the threshold is  simply a count of the number artifacts above the audibility threshold, which is also constant across frequencies and products. This simplicity makes these measurements extremely fast and simple to configure.

4 Tips for Production Line Audio Test Limit Setting

  1. Whatever method you use to set audio test limits, they may need to float in both level and frequency to overcome reflections from fixturing and from the test box itself. 
  2. It’s important to measure devices multiple times for Gage R&R, to understand any variation in the product and microphone measurement positioning to ensure measurement repeatability. There is often a certain amount of trial and error involved in setting limits, tweaking them until there is acceptable yield  and good correlation with human listeners.
  3. Correctly setting limits is an extremely complex process, and it’s well worth being on-site to assist with limit-setting when you are putting a device into production so you can truly see and hear what is going on. 
  4. At the end of the day, your limits need to correlate well with what you hear, so make sure units that pass sound good, and units that fail sound bad. If you can find units that sound marginally or borderline good, these are great to use as a sanity check – they should barely pass your audio test limits!

Setting Audio Production Line Test Limits in SoundCheck

Check out chapter 19 of the SoundCheck manual for detailed information on the various methods for setting production line audio test limits that are available in SoundCheck.

https://www.listeninc.com/wp/media/2024/07/production_line_limits.jpg 1429 1731 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2024-07-19 09:59:062024-07-19 10:24:39Setting Production Line Audio Test Limits: 3 Methods and 4 Useful Tips

How to Protect SoundCheck Data

July 16, 2024/in Blog, SoundCheck Tips Videos, Uncategorized/by Julius Wijono

SoundCheck allows you to protect items in the Memory List, ensuring that subsequent runs of your sequences don’t overwrite your existing test data. In this quick tutorial, we’ll show you how to manually and automatically protect your data, keeping it safe and easy to manage for future analysis.

Additional Resources for SoundCheck and Data Protection

Detailed explanations of how to protect data in SoundCheck can be found in the SoundCheck manual.

Video Transcript: How to Protect SoundCheck Data

Soundcheck allows you to protect items in the Memory List, so that subsequent runs of your sequences don’t overwrite any of your existing test data. By default, SoundCheck overwrites any data that isn’t protected or saved after each subsequent run of your sequence, or if the program is closed.

If you want to keep data and not overwrite it, you can simply select the data from an individual run of the sequence in the memory list and protect it, or , in your sequence you can auto protect the data, which will automatically save data for each and every iteration of the sequence. 

Using the Memory List Sorting and Grouping functions, SoundCheck can save all protected and auto protected data to its own Auto Group in the Memory List, making it easy to distinguish what data is protected when recalling a sequence. 

Here we are looking at a looping sequence in which pink noise is played back starting at -40dB, and increases in amplitude in 5dB steps for five passes.

Normally, after each run of the sequence, the data previously displayed is overwritten with data from the current run of the sequence. Once I select my recorded data in the Memory List, and right-click to select “Protect” it, that data and only that data will remain in the memory list and displayed on my graph. 

If I instead choose to Auto Protect any chosen values, after every run of my sequence, the data for those values is appended in the memory list, and the five new curves are added to my display. This data isn’t deleted from the memory list unless you manually delete it, or if you discard it when closing SoundCheck.

This enables you  to access and recall the data outside of the sequence in which it was originally recorded. Even live curves, created by the RTA, can be protected.

https://www.listeninc.com/wp/media/2024/07/SoundCheck-Tips-3.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2024-07-16 12:54:262026-08-27 14:11:42How to Protect SoundCheck Data

Q&A with Steve Temme – Loudspeaker Industry Sourcebook 2024

July 12, 2024/in Blog, Corporate and Misc Article Reprints/by Zarina

Want to get to know Listen Founder and President, Steve Temme, a little better? Each year, Loudspeaker Industry Sourcebook features interviews with industry leaders in which they ask their opinions on current events, issues and trends in the audio industry. Read what Steve Temme had to say.
Full Article

 

Question 1: How would you describe the market and the industry over the past year? And how did your current business evolve in the past 12 months?

Temme: It’s never a good start to the year when most of your major customers announce massive layoffs and budget freezes in January! However, some of the best innovations are developed during challenging times, and this year has been no exception. Our perceptual measurement drive continued with our new enhanced Loose Particles algorithm for transient distortion detection. We also introduced AudioConnect 2, our portable and budget-friendly 2-channel audio interface, and the MDT-4000 audio measurement turntable, with high-end performance at a very competitive price. Also on a positive note, the return to normal component costs and lead times has relieved a lot of our manufacturing stresses and enabled us to return to full stock levels of all our hardware products.

Question 2: What are the perspectives for your business in the next 12 months?

Temme: Right now, I’m just hoping for a year that does not include a pandemic, increased trade sanctions, supply-chain issues, or a fire at one of our key component suppliers! Joking aside, from adversity comes innovation, and the challenges of the past few years have resulted in the audio industry overflowing with new technologies and applications which is keeping us on our toes with new measurement challenges. One example is the automotive industry – audio measurement is increasingly challenging due to the high channel counts and a vast amount of on-board signal processing combined with many different test requirements including, spatial audio, sound zones, hands-free communications, active noise reduction and more. Similarly, spatial audio presents some exciting measurement challenges as we continue to develop perceptual metrics to locate virtual sound sources and measure spatial audio reproduction accuracy.

Question 3: In reference to your supply chain and the geographical markets in which you do business, what, if any, changes have you made in the way you do business?

Temme: When I visited Shenzhen last year, I was surprised by how much had changed. I was one of very few foreigners, and since my last visit, Chinese brands had replaced most American consumer products – particularly in the automotive industry. Few of our OEM customers have resumed their pre-pandemic travel schedules, leaving far more responsibility for audio product quality in the hands of their contract manufacturers. This, combined with the drive to ‘buy Chinese’ has created a massive surge in factories using locally made, in-house, or even pirated measurement systems with minimal oversight. We’ve worked closely with our customers to provide new tools that help them ensure test integrity without resuming regular travel to China. This includes the ability to ‘lock’ a measurement sequence so that limits, test levels etc. cannot be changed and even the test steps themselves are hidden from the end user. This prevents the test sequence being modified, misappropriated, or re-created on a different test system with unproven results. We also introduced the capability to lock a test sequence to specific verified hardware keys, further ensuring end-to-end test compliance.

 

Full Article

https://www.listeninc.com/wp/media/2025/04/LIS_2024_QA.jpg 519 400 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2024-07-12 15:38:422025-04-12 15:40:44Q&A with Steve Temme – Loudspeaker Industry Sourcebook 2024

The Future of In-Car Audio Measurements

July 11, 2024/in Blog/by Zarina
Photograph showing an In-Car Audio Measurement using SoundCheck and AmpConnect 621

In-Car Audio Measurement using SoundCheck and AmpConnect 621

July 11, 2024. A couple of weeks ago, I attended the AES Automotive Conference in Gothenburg. While I expected in-car audio measurements to be a discussion point (after all, that’s why I went), I hadn’t counted on it being such a strong focus of the show, and I was excited by the incredible collaborative efforts that are happening to bring the world better quality sound in cars.

Much of this can be attributed to the AES TC-AA white paper on proposed measurement techniques for automotive audio that was published for review last year. This white paper was a collaborative effort between a worldwide group of engineers that included car manufacturers, car audio system designers and measurement experts. Under the leadership of Jayant Datta, we devised and documented methods for measuring frequency response, Max SPL and impulsive distortion in cars. The white paper outlined an entire proposed standard from physical setup such as microphone positioning, to controls (e.g. volume), test signals and analysis methods, and invited feedback and discussion.

Until a couple of weeks ago, we had received minimal feedback from the industry as a whole, to the extent that I sometimes wondered if it had been worth all the effort. This conference changed all that! I was pleasantly surprised with the number of people who showed up to see me demonstrate these measurements in a shiny new Volvo XC60 (Thanks Jonatan and colleagues for allowing me to use your demo car). Similarly, a good number of attendees showed up for our panel discussion on the paper, especially considering it was the last afternoon of the event and many had already left to travel home. In this session, Jonatan Ewald, Marco Olivieri, Jayant Datta, Stefan Irrgang and I explained the proposed standard and showed some results.

I was excited to attend paper presentations where our proposed guidelines were carefully followed when making measurements. A great example of this was a paper “An empirical evaluation of in-car acoustic measurements for the sport car scenario” from Ferrari  who presented some excellent research on making measurements in sports cars: a 4-seater luxury vehicle and a 2-seater track-oriented vehicle. There’s nothing like the combination of audio and fast cars to get my attention!

From the conversations I had with other attendees, it seemed that many had read the paper and experimented with the techniques and configurations we proposed. From the overall positive reception, it’s clear that we are working along the right lines, but there were many valuable suggestions for improvement. This includes more options for positioning the 6 microphone array – the arrangement we proposed doesn’t fit too well in those sporty Ferrari seats! We also learned that people want more distortion measurements. The impulsive distortion that we included is ideal for an end-of-line check to make sure there are no rattling loudspeaker parts, but several manufacturers expressed a desire to measure other types of in-car distortion, for example Max SPL vs Frequency and THD. There was also some debate about correlated versus uncorrelated pink noise and how to measure accurately at low frequencies.

The white paper does not specify the method for getting the test signal into the car, leaving the user open to use Bluetooth, USB stick, memory card or other methods. Bluetooth is a popular choice due to its simplicity. However, it is apparent that despite its many advantages, consistent and reliable Bluetooth connections are more challenging than you would think.

The feedback we received at the conference made it clear that the standardization we are working towards is much needed, and could be considerably expanded to include more measurements. One attendee, for example, was particularly interested in expanding it to also cover measuring headrest speakers!

This brings me onto the second focus of the show – spatial audio. Cars are being built with more and more speakers in varying locations such as in the ceiling, headrests, and more in support of spatial audio and sound zones. Pretty much every manufacturer now supports Dolby Atmos playback, but measuring it accurately is a challenge that most automotive manufacturers have yet to solve. Infotainment designers strive to re-create the sound of a home-based system in the car, but most are currently tuning by ear, which is slow and inexact. Many are using inexpensive room acoustics software which requires manual operation and real time data analysis. While this works, it is also very time-consuming. More scientific methods for measuring spatial audio are in their infancy, but being developed rapidly by test and measurement companies, automotive manufacturers, and even Dolby themselves. I have a suspicion this could be a topic for a future AES Automotive conference. Stay tuned!

Learn more about Listen’s capabilities for automotive audio measurement.

https://www.listeninc.com/wp/media/2024/07/AES_automotive_in_car-scaled.jpg 2560 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2024-07-11 15:46:372024-09-04 10:24:38The Future of In-Car Audio Measurements

How to Measure a Loudspeaker

July 10, 2024/in Audio Measurement Videos, Blog, Loudspeaker Videos/by Julius Wijono

How do you measure a loudspeaker? In this short video, we demonstrate a basic production line loudspeaker audio test using SoundCheck – the same measurements that are made on thousands of loudspeaker production lines worldwide.  It’s important to understand the measurements we make on this simple device, as they form the basis of the electroacoustic measurement suite for a whole host of devices ranging from headphones to smart devices and more.

In this demonstration we use a standard SoundCheck test sequence (included with the software) to measure a loudspeaker’s frequency response, distortion, sensitivity, polarity and impedance. We discuss the measurement results and the information they provide, and explain how the test sequence works. Like all SoundCheck test sequences, it can easily be customized and expanded to add additional analyses.

Watch this Video Demo of Measuring a Loudspeaker

Learn More about How to Test Loudspeakers

Here are some of our other online resources for more information on how to measure loudspeakers:

  • A seminar on basic loudspeaker testing: https://www.listeninc.com/basic-loudspeaker-testing-seminar/
  • A seminar on production testing of electroacoustic devices such as loudspeakers: https://www.listeninc.com/production-testing-seminar-2/
  • An article on transitioning audio tests from the R&D lab to the production line: https://www.listeninc.com/transitioning-audio-tests-from-rd-to-the-production-line/
  • An article on end-of-line speaker distortion measurements: https://www.listeninc.com/end-of-line-distortion-measurements/
  • Many of our published papers (https://www.listeninc.com/resources/published-papers/)  outline the algorithms that we use to measure loudspeakers.

You can also check out our wide range of  pre-written test sequences for loudspeaker testing. These can be used as-is or modified for your specific requirements, saving you considerable test development time. https://www.listeninc.com/products/test-sequences/

Video Transcript: How to Measure a Loudspeaker

In this short video, I’ll demonstrate testing a loudspeaker driver using SoundCheck with one of our standard speaker test sequences which is suitable for production or QC testing. This example sequence is one of many that come pre-installed with SoundCheck  to get you up and running quickly.

When we’re testing for production or manufacturing, we need to make sure the manufactured speaker closely matches the specifications of the original design, and it’s important that the test is fast, accurate, and cost-effective.  We’ll limit the test to the most important metrics –  frequency response, distortion, sensitivity, polarity and impedance. First I’ll show you the test, then I’ll tell you a little more about the measurements we made.

My test setup is very simple. I have the SoundCheck test software installed on my computer, and all I need with this is a measurement microphone, plus our AmpConnect 621 all-in-one test interface. This is a high resolution audio interface which also includes microphone power, an amplifier, and impedance measurement, all in one unit with a single USB connection to the computer. This replaces the need for separate hardware and is true plug and play, making it quick and simple to set up and use, and of course very cost-effective.

The AmpConnect 621 comes fully calibrated from Listen. Because it’s true plug and play, I simply connect USB to my computer, power on and SoundCheck will auto-populate hardware inputs and outputs including calibrations, sampling rate, bit depth and more. I’ve already calibrated my measurement microphone, so let’s run the sequence.

When I hit ‘start’ you’ll hear the test signal play. We’re using our unique smooth stepped sine wave, the Stweep as this is fast, and all the analyses are done from a single test signal. The microphone captures the signal, the amplifier impedance circuit measures the current, and the software analyzes the responses.

There you go, we just ran a complete loudspeaker test. Did you notice how quick and easy that was?  Let’s take a look at the results.

This graph shows the Frequency response and impedance. Frequency response is the best overall test to make sure the loudspeaker is working properly, and here we’ve plotted the level vs. frequency on an XY graph. Ideally, the loudspeaker should have a flat response but in general, we are looking for a smooth response, especially in the midrange from 800 to 5kHz, without too many big dips or peaks. 

We also have the impedance plotted on the same graph. This measures the resonant frequency of the loudspeaker, and should be a single, smooth and symmetrical bump. This tells us how the speaker driver will perform at low frequencies when mounted in a loudspeaker enclosure. 

You can plot these separately if you prefer, I just have them together to save screen real estate. You can see that the left axis is marked in dB SPL for the frequency response curve, and the right indicates the impedance magnitude in Ohms. 

Now let’s take a look at distortion. This sequence measures three types of distortion, THD, Rub & Buzz and transient distortion. THD is total harmonic distortion and, like frequency response, is a good overall indicator that the product has been correctly manufactured.

Rub & Buzz distortion is a periodic distortion caused by rubbing parts in the speaker, for example, an incorrectly centered voice coil or poorly trimmed lead wires. This is measured using our enhanced perceptual algorithm which examines higher order harmonics, typically 10th and above, using a perceptual algorithm that mimics the response of the human ear. This tells you whether you have any audible rub & buzz present in your device. 

The third type of distortion that we measure is loose particles or transient distortion. Transient distortion is caused when debris gets trapped behind the dust cap during manufacture. Because these trapped particles vibrate randomly rather than periodically, we measure them in the time domain with our enhanced Loose Particles algorithm. What’s neat about this compared to the way that other people measure distortion is that we separate out loose particles from Rub & Buzz distortion – most measurement systems combine the two. This really helps with troubleshooting production line issues, as these distortion types  are caused by very different problems.

Here’s our sensitivity measurement. This calculates the average level across the frequency range, and this is a good indicator of whether the loudspeaker magnet is  properly magnetized and helps match speakers for headphones and multi-channel systems.

This is the polarity measurement. This is a simple check to ensure that the loudspeaker has been wired properly and the leads are not reversed. This is important because if leads are not correctly wired, you may encounter low frequency cancellation with other drivers or speakers in an enclosure.

So there’s all the measurements in our basic loudspeaker test sequence. And as you saw, it only took about a second!

Now I’m going to show you a little more detail about the test sequence I used. In SoundCheck, we use a sequence for any test that we want to run over and over again, as opposed to quick, on-the-fly measurements. Let’s open it up. It’s really simple to program a sequence, we have a massive library of steps, which are the building blocks for the sequence. And you simply drag and drop these and adjust the values. You can also create your own custom steps, but that’s a whole other topic in itself.

OK, so here is my sequence…

It executes this series of steps from the top down, and our memory list manages the data that is analyzed. You’ll see the step prefix: for example, this is a message step… this is a stimulus step… etc. In short, what we’re doing here is defining the test stimulus, playing it, recording the response from the reference mic and impedance circuit, and analyzing the response to calculate and display frequency response, impedance, sensitivity, distortion, etc.  

Let’s take a closer look at the stimulus step. In this test, I used a compound stimulus for speed. It has 2 parts to it – the frequency sweeps from 20kHz to 300Hz in 12th octave steps and then transitions to 3rd octave steps at low frequencies from  250Hz to 50Hz. Because loudspeakers tend to have a smoother response at low frequencies, we can still get an accurate measurement with lower resolution. Optimized test frequency resolution and sweeping from high to low frequencies to minimize speaker ringing, saves us valuable test time. 

Another part of the sequence I want to show you is limits. I ran this sequence with arbitrary limits, I didn’t set them for my device, so you probably noticed it failed some of them. In a production environment, we typically measure a golden unit or run statistics on a bunch of good units, then set pass/fail limits based on desired tolerances. These limits are easy to set, and we have many options  from straight lines to offset curves. 

And lastly, here we have the  display step. This defines how we want the data to be displayed, and you can see here it’s instructing the software to plot the data on the graphs and tables I just showed you.

If I wanted to automatically save data from the sequence, this would be easy to do. I’d just need to add an Auto Save step to tell it what to save and where to, and that will happen after every measurement. SoundCheck can save data to a wide range of formats including Excel, and MATLAB to name a few, and can even save metadata along with the results.

So that’s how you can implement a complete loudspeaker test right out of the box with SoundCheck – all you would need to do to make this sequence work for you is set appropriate test levels and limits. Of course there are also countless ways you could expand and adapt this for your needs beyond the production line. For example, you could add a bluetooth interface if you need to test a bluetooth speaker, you can run open loop tests for voice-activated speakers, or add a turntable if you need to make directional measurements and plot the polar responses. And there is a whole load of additional software functionality if you are doing lab measurements, for example, Thiele Small parameters, custom equations and more. 

If you’d like to learn more about loudspeaker testing and/or discuss your test application, please contact Listen or your local distributor. 

 

https://www.listeninc.com/wp/media/2024/07/Thumbnail-2.png 720 1280 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2024-07-10 11:33:002026-08-27 15:13:11How to Measure a Loudspeaker
Page 9 of 31«‹7891011›»

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top