Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

100 Things you didn’t know about SoundCheck videos

Synchronize Multiple Signal Generators (100 Things #40)

October 27, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

SoundCheck’s signal generator is a virtual instrument for playing signals (frequency, white or pink noise, .wav files or .wfms) out of any signal path in SoundCheck. But did you know that multiple signal generators can be used simultaneously in SoundCheck and even synchronized or delay offset, both in a sequence and for offline measurements. In this short video, we explain why this is useful.

Synchronizing Multiple Signal Generators in SoundCheck

Learn More About SoundCheck’s Signal Generator and other Virtual Instruments

Check out our seminar on SoundCheck’s Virtual Instruments.

 

Video Script: Synchronize Multiple Signal Generators

SoundCheck’s signal generator is a virtual instrument for playing signals (frequency, white or pink noise, .wav files or .wfms) out of any signal path in SoundCheck. But did you know that multiple signal generators can be used simultaneously in SoundCheck and even synchronized or delay offset, both in a sequence and for offline measurements. This has many audio test applications, let’s take a look…

When more than one signal generator is opened, a sync checkbox is available. When more than one signal generator is synchronized, the signal generators with the checkbox checked, will be phase-locked to each other and when clicking Play on one signal generator, all signal generators will start playing simultaneously . This might be useful, for example, when playing back a binaural or multi-channel recorded wav file that requires synchronization and needs to be analyzed in parallel with the multi-channel Real Time Analyzer.

It can also be used, for example,  to play back pink noise to the left and right ears of a headphone, using the RTA to monitor the spectrum of the left and right ear simulators . You might perform this test, prior to running a full headphone test sequence to assure equal level balance and a tight seal on the left and right ears

While the Signal Generator defaults to sample accurate playback, with SoundCheck 20 or later, you can set delays between signal generator destinations, to make sure signals from different generators are not in phase or are playing in a sequenced manner. For example, maybe you want to simulate a background noise environment by playing back a .wav file to multiple background noise speakers. You can target up to 64 simultaneous channels with different Signal Generators each with its individual configuration. We even have an ETSI ES 202 396-1 background noise generation test sequence available to save setup time if you need to do these types of tests .

As you can see, multiple signal generators have a whole host of applications ranging from synchronized headphone tests to background noise generation and sequenced playback. For more information, ask your sales engineer for a demo.

 

https://www.listeninc.com/wp/media/2023/11/100_things_40_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-10-27 14:12:552026-08-21 15:26:48Synchronize Multiple Signal Generators (100 Things #40)

Multimedia Documentation for Accurate Test Configuration (100 Things #39)

October 20, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

The best way to ensure that your test operators follow procedures is to provide the right directions at the right time. SoundCheck’s multimedia documentation capabilities allow videos, pictures, and documents to be inserted into the test sequence and opened at the appropriate sequence step to provide real-time guidance. Custom steps even permit other programs to be opened during the sequence run.

Real-Time Test Guidance with Multimedia Documentation in SoundCheck

Learn More About SoundCheck

Check out our main SoundCheck page for additional information on our audio test and measurement software.

 

Video Script: Multimedia Documentation for Accurate Test Configuration

Did you know that you can use pictures and PDF files to provide instructions within SoundCheck? Documentation is important, especially when it contains important sequence information. Some tests require precise hardware configurations, and a visual aid is often the best way to ensure correct test setup. Luckily, it’s easy to embed text, picture and PDF instructions in a SoundCheck sequence. Let’s take a look at what you can do.

Adding your own sequence documentation is simple. In the sequence editor, open the Sequence Configuration window by double clicking on Overall Sequence. Here you can have the sequence open an instructions file when it is opened. This option is not limited to PDF documents. You can choose any picture, program, or video to open along with the sequence.

Some test sequences rely on the operator to correctly place equipment. Message steps contain text, and limits show comparison of measurement results, but pictures can illustrate operation outside of the SoundCheck window. SoundCheck supports both JPEG and Bitmap file types, and images can be added to any display step in a sequence. This is a great solution for providing clarity during a sequence.

For example, this sequence for measuring Noise Cancellation of headphones requires a speaker to be set up alongside a head and torso simulator, to generate background noise. Simply stating the speaker needs to be a certain distance away from the HATs still leaves room for ambiguity, but the provided image clearly shows the height, distance, angle, and position of the speaker. Images or text messages can be included during a sequence as well, even simultaneously. This is great for instructing operators to make changes like turning on or off a headphone’s active noise cancellation, connecting or disconnecting cables, moving speakers or microphones, or mounting headphones or headsets.

Once a display step is added to a sequence, an image can be added by right clicking on the display tab, and selecting “new > picture”. Just like all windows in a display step, the size, position, and location of the image can be completely customized, and the changes are automatically saved in subsequent sequence runs.

SoundCheck’s features go beyond PDFs and images: full instructions can be provided to make sure your operator runs the test correctly, every time.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_39_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-10-20 14:43:352026-08-26 15:38:49Multimedia Documentation for Accurate Test Configuration (100 Things #39)

Digital Measurements – USB Headphones & Microphones (100 Things #38)

October 13, 2022/in 100 Things Videos, Blog, Headphone & Headset Videos, Measurement Techniques Videos, Microphone Videos/by Zarina

SoundCheck’s testing capabilities go beyond the analog domain. It has always been able to measure digital devices and make both analog and digital domain audio measurements simultaneously on different channels. The digital inputs and outputs inside SoundCheck are easily configured to measure USB Headsets, MEMS microphones and so on. Watch this short video to learn more.

Measuring Digital Devices with SoundCheck

Learn More About SoundCheck’s Signal Generator and other Virtual Instruments

Check out our pre-written test sequence on measuring digital MEMS microphones

 

Video Script: Measuring Digital Devices such as USB Headphones & Microphones in SoundCheck

When we talk about measuring traditional transducers such as microphones and loudspeakers, we are measuring analog devices that respond to voltage and pressure. Nowadays, most microphones and loudspeakers have become quasi analog/digital devices because their analog signals are immediately transformed into the digital domain built into the design and transducer package.  With digital devices dominating the consumer electronics market today, have you wondered if you can set up digital inputs and outputs inside SoundCheck to measure USB Headsets, MEMS microphones and so on? The answer is yes.

SoundCheck supports both analog and digital inputs and outputs for measurement. Setting up digital inputs and outputs is very straightforward. All you need to do is create a new digital channel on your Hardware editor, set it to  input or output and select the appropriate digital calibration reference e.g. AES-17 when configuring the signal path inside the calibration editor. It is as simple as that and you should be ready to use your connected digital device to make audio measurements.

The digital interface can be as simple as a USB headset plugged in directly to your computer or a device plugged into a supported audio interface, or as complex as a bunch of MEMS microphones going through a digital circuit board before interfacing with the test system. You can also use a USB headphone as an input monitor if your audio interface doesn’t have one, and analog and digital inputs and outputs can be used simultaneously.

SoundCheck offers great flexibility for testing both analog and digital devices. If you’d like to take a closer look at how this works, please contact your sales engineer for a demo.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_38_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-10-13 15:04:172026-08-21 15:17:24Digital Measurements – USB Headphones & Microphones (100 Things #38)

Pre-written Test Sequences for Measurements to Audio Industry Standards (100 Things #37)

October 7, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

We offer a whole catalogue of pre-written SoundCheck test sequences to save you development time when testing to audio industry standards. Written by industry professionals in each field, these sequences cover a variety of devices and applications including headphones, communications devices, loudspeakers and more.

Pre-written Test Sequences for Measurements to Audio Industry Standards

Learn More About Test Sequences for measuring to industry standards

Check out our video and free test sequence for testing to AES75 (M-Noise) Measurement of Max SPL for Loudspeakers.

See our selection of for-purchase SoundCheck sequences for testing to standards.

 

Video Script: Pre-written Test Sequences for Measurements to Industry Standards

Did you know that in addition to our multitude of free resources and test sequences, Listen offers a library of “for purchase” test sequences that conform to a variety of industry standards?

Our hearing aid test package tests to the ANSI S3.22 and IEC 60318-7 standards while the EN 50332 sequence provides assurance that headphones and music players meet the Max Noise Exposure criteria set in the standard.  Other packages include calibration of a 4.1 speaker array for background noise simulation to ETSI ES 202 396-1 and measuring volume control requirements for wireless mobile devices as set forth in TIA 5050. We also offer various sequence packages for testing telephones, speaker phones and headsets to various other telecommunications standards including IEEE 1329-1999, TIA-920-B, and Doubletalk to both ITU-T P.502 and ETSI TS 126 132 standards.

Each Sequence package comes with a schematic diagram of the required hardware setup, detailed instructions for setting up your hardware, Hardware editor, calibration editor and related test hardware, and a general overview of the sequence.

Visit our website to learn more.

 

https://www.listeninc.com/wp/media/2023/11/100_things_37_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-10-07 15:31:512026-08-24 16:41:17Pre-written Test Sequences for Measurements to Audio Industry Standards (100 Things #37)

Using Virtual Instruments for Greater Acquisition Flexibility (100 Things #36)

September 29, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

Virtual Instruments in SoundCheck are a quick and easy way to take a measurement without developing a full test sequence, for example to check a level in the multimeter or view an FFT spectrum in the Spectrum Analyzer. They also offer amazing versatility when used in a test sequence to acquire data for further analysis, post-processing, etc. Watch this short video to learn more.

Using Virtual Instruments in SoundCheck

Learn More About SoundCheck’s VIs

Check out our easy-to-follow tutorials on virtual instruments. (in the Acquisition section)

Watch our video on how to save time with virtual instrument configuration.

Check out our seminar on SoundCheck’s Virtual Instruments.

 

Video Script: Quick Measurements with Virtual Instruments

Virtual Instruments in SoundCheck are a quick and easy way to take a measurement without developing a full test sequence. This might be useful if, for example, you want to check a level in the multimeter or view an FFT spectrum in the Spectrum Analyzer. And, all of the measurements in SoundCheck meters can be saved to SoundCheck’s memory list.

However, did you also know that SoundCheck instruments can be used in a test sequence? A Virtual Instrument acquisition step can be created to acquire from a device you want to measure. This adds yet another way in SoundCheck to acquire data for further analysis, post-processing, etc.

You can even use multiple Instruments manually or in a virtual instrument acquisition step. Here’s an example of a virtual instrument acquisition step that acquires input from the reference mic and calculates the level and RTA spectrum [show screen capture of sequence]. Once acquired, the data can be processed like any other data in SoundCheck. For example, the level or RTA spectrum can be passed through a pass/fail limits step. This might be useful for measuring input-only noise, for example: fan noise from your product.

In this example, you can use a signal generator and mult-RTA in a Virtual Instrument acquisition to measure the individual channel of a 6-mic array along with the power sum of the 6 channels [screen capture of sequence]. The acquired data is captured to the curves tab of the memory list.

As you see, integrating virtual instruments as a step in SoundCheck is very easy, and another example of SoundCheck’s testing flexibility.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_36_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-09-29 16:26:342026-08-24 16:53:03Using Virtual Instruments for Greater Acquisition Flexibility (100 Things #36)

AES75 (M-Noise) Measurement of Max SPL for Loudspeakers (100 Things #35)

September 22, 2022/in 100 Things Videos, Blog, Loudspeaker Videos/by Zarina

The AES75 standard details a method for measuring maximum linear sound levels of a loudspeaker system or driver using M-Noise, a test signal specifically developed to emulate the dynamic characteristics of music. Our pre-written test sequence automates this measurement to the new AES 75 standard for Maximum SPL, removing subjectivity, increasing reliability, and saving time.

Automated AES75 Measurements in SoundCheck

More Resources for Measurement to AES75

Would you like to try this yourself? If you already have SoundCheck, you can download the AES75 (M-Noise) test sequence. Please note that you will need the waveform filter (part # 2032) and transfer function (part # 2021) modules installed on your SoundCheck system.

Get a copy of the AES75 Standard.

 

Video Script: Automate Measurements Using M-Noise with SoundCheck

Our pre-written test sequence automates measurement to the new AES 75 standard for Maximum SPL, removing subjectivity, increasing reliability, and saving time.

This standard details a method for measuring maximum linear sound levels of a loudspeaker system or driver using M-Noise, a test signal specifically developed to emulate the dynamic characteristics of music. Clearly defined limits for linear frequency response and coherence determine the Max SPL level and remove any measurement ambiguity.

Implementing the standard manually relies on an operator’s subjective judgment of real time spectrum analyzer data. It also requires multiple iterations of a measurement, therefore is labor intensive.

Our test sequence is fully automated. We use the same test signal and calculations outlined in the standard, but automated analysis steps objectively calculate the measurements and drive the next steps in the procedure.

Let’s take a look.

Here, you can see we are using the freely available M-Noise test signal introduced by Meyer Sound. This stimulus features a relatively constant peak level as a function of frequency, but a diminishing RMS level with increasing frequency.

First, we use a test signal approximately 20dB below our expected Max SPL to obtain a provisional linear frequency response, linearity, coherence and signal to noise ratio. We then increase the test level by 3dB, and compare the results to the initial value. The results must be within +/- 1dB, have a coherence of at least 97% and a signal to noise ratio 15dB or higher so that we know we are operating in the speaker’s linear region and our signal to noise ratio is sufficient for accurate measurements.

Next we automatically increase the test level by 3dB and compare it to the initial results, normalized to the current test level. Multiple measurement iterations take place until one of the ‘stop’ conditions is reached. These conditions are either:

  • the live measurement differs from the linear frequency response by at least 2 dB over at least two octaves
  • the live measurement differs from the linear frequency response by at least 3 dB anywhere, or
  • the Coherence Reduction Target is met –  this means the signal to noise ratio is 10dB or less and/or the coherence is 91% or less.

When one of these limits is reached, the sequence then reduces the test level to the last level that passed and repeats the measurements in 1dB increments to find the precise Level at which the response deviates from the base level.

Once this level is established, the device enters a burn-in process, where the M Noise stimulus is played through the DUT for five minutes and fifty-three seconds and again compared to the initial result. This long duration measurement is also used to generate peak, rms and A weighted RMS sound levels. If the response curve remains consistent, this curve is the Max SPL curve according to the standard. If it is not within the acceptable limits, the device is cooled down and the tests repeated with a longer stimulus duration.

All the operator needs to do is enter any stimulus limits based on the operating range of the DUT into the sequence before starting, then return when the test is complete.

As well as saving time, SoundCheck mathematically calculates the data in analysis steps within the sequence, which avoids the subjectivity of relying on operator interpretation of real-time spectrum analyzer outputs. This increases repeatability and confidence in the results. This sequence is available free of charge on our website. Check it out!

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_35_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-09-22 16:27:032026-08-21 13:34:41AES75 (M-Noise) Measurement of Max SPL for Loudspeakers (100 Things #35)

Display Phase Measurement Alongside Frequency Response (100 Things #34)

September 15, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

Its simple to display phase measurement alongside frequency response when making audio measurements in SoundCheck. Watch this short video to learn more.

Displaying Phase Information in SoundCheck

More Resources about Phase Measurement

The best resource for learning how to use SoundCheck is the SoundCheck User Manual

Check out our knowledgebase articles on displaying the phase of a curve and displaying unwrapped phase.

 

Video Script: Display Phase Information Alongside Frequency Response

Today, I’m going to show you yet another useful feature SoundCheck offers that many people are unaware of. We often talk about measuring the frequency response of a loudspeaker. This is probably the most commonly used metric to objectively display how a speaker sounds when playing back music. When we measure the frequency response, what we are essentially doing is a 2 channel FFT transfer function, transforming waveforms in the time domain into the frequency domain. A natural by-product of a transfer function is the Phase response. While the frequency response magnitude gives you the amplitude of the frequency components relative to others. The phase response describes how the frequency components align in time, and is critical in determining the transient response of a loudspeaker.

Since Frequency and Phase response go hand in hand, SoundCheck automatically calculates both of these in Analysis although phase is not displayed by default. Phase is stored as a Z value for every X and Y value where X and Y are the Frequency and amplitude. You can display the Phase response alongside the frequency response on a graph by simply right clicking on the graph and check-marking Phase.

SoundCheck also comes with an Unwrap Phase function that can be applied to any Phase response measurement to remove any discontinuities in the response due to the phase exceeding +/- 180 degrees and make it easily readable by adding or subtracting multiples of 2 pi as appropriate. Once again, this can be toggled on or off in the right click menu.

One of the beauties of SoundCheck is that for any post processing operations on the frequency response that have direct effect on the phase response, SoundCheck automatically makes sure that the Phase is adjusted accordingly. For example, if you invert a frequency response, SoundCheck defaults to inverting the Phase response too, still offering you the flexibility if you choose not to.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_34_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-09-15 16:39:582026-08-21 15:08:10Display Phase Measurement Alongside Frequency Response (100 Things #34)

Comparing Measured Data to a Target Curve (100 Things #33)

September 8, 2022/in 100 Things Videos, Blog, Headphone & Headset Videos, Measurement Techniques Videos, SoundCheck Functionality Videos/by Zarina

You can import any target curve into SoundCheck. This enables quick and easy comparison of your measured data to any reference data.

Comparing Measured Data to Target Curves in SoundCheck

More Target Curve Resources

To see an example of using Target Curves in SoundCheck, take a look at the work we’ve done with the Harman Target Curve. This page also links to the sequence that you can download to use with SoundCheck.

 

Video Script: Comparing Measured Data to Target Curves

Did you know that you can import any target curve in SoundCheck? This lets you compare your measured data to any reference data, fast and easy.

This functionality is simple to use – simply import the curve into the memory list and from there, use it in a sequence or drag and drop it onto any graph.

One of the simplest examples of this capability is to compare measured results to a golden unit.  All you have to do is  import the data from the golden unit into the memory list, then plot it on the same graph as the measured unit. You can use mathematical functions to statistically compare the curves, or you can use the curve offset by a fixed dB level, and use it as a limit.

Another example is live tuning. Matching a frequency response and sound pressure level is a common audio test, from measuring loudspeakers in a shop environment to tuning an automotive infotainment system. In these tests, you can compare RTA generated live curves to the imported target curve, and adjust the microphone location or manipulate the sound source in real time to match the target curve.

We also offer a more advanced application of target curves in a free test sequence that calculates a listener preference rating for headphones based on the Harman Target curve, developed by Sean Olive. This sequence measures the frequency response of your headphones and calculates an error curve, which is derived from subtracting the Harman Target Curve from an average of the headphone left/right response. The standard deviation, slope and average of the Error curve are used to calculate the predicted preference score.

So whether you are performing real-time measurements with live curves, setting limits based on golden units, or predicting listener preference of headphones, SoundCheck’s curve-importing capability makes your audio testing easier.

 

 

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_33_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-09-08 17:01:452026-08-21 14:44:34Comparing Measured Data to a Target Curve (100 Things #33)

Calibrate and Use Third Party Hardware with SoundCheck (100 Things #32)

September 1, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

SoundCheck supports any third party hardware audio interface and provides the capability to fully calibrate all signal paths. Watch this short video to learn more,

How to Calibrate and Use Third Party Hardware with SoundCheck

More Hardware Resources

Just because you can use any hardware with SoundCheck doesn’t mean that you should! Check our our Hardware Compatibility Table to see which audio interfaces we recommend.

 

Video Script: Calibrate and Use Third Party Hardware with SoundCheck

We offer many hardware options for use with SoundCheck including audio interfaces, reference microphones, microphone power supplies, and amplifiers. Our own Listen hardware comes pre-calibrated, and the values are stored and directly read from the device. When you purchase Listen-approved third party interfaces from us, such as RME and Lynx, we pre-calibrate them and provide a hardware QC sheet containing the Vp and latency values and complete setup instructions.

While these offer the fastest path to a calibrated test setup, we also understand you may prefer to use other third-party hardware with SoundCheck, especially if you already own a suitable audio interface. So, if you are wondering if you can calibrate and use your existing audio interface with SoundCheck, the good news is that you probably can.

Calibration is recommended before you make any measurement. This involves measuring the peak voltage (Vp) that can be input or output through the audio interface before it saturates so that measurements can be scaled to full digital scale (FSD). Latency is also measured during the calibration process. Even if you’re using hardware that is not listed in our Hardware Compatibility guide, SoundCheck supports, and calibrates, most third party interfaces using WDM, WASAPI, ASIO, Core Audio and NI DAQmx drivers.

Third party audio interface calibration is a one time process which shouldn’t take more than 5 minutes and helps ensure your measurements are accurate. We provide a calibration sequence that can be run from inside the Hardware editor at the click of a button, along with documentation to outline the procedure. The only additional equipment you need is a BNC-T connector and a multimeter.

While we love the tight integration and synergy that comes with using Listen hardware with SoundCheck, we understand that flexibility is also important, given the wide variety of applications and testing needs that we support. With the ability to calibrate and use many third party audio interfaces, including high-channel count audio interfaces, and other hardware, and use multiple interfaces simultaneously, often in different modes, SoundCheck offers true measurement flexibility – with accuracy.

 

 

 

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_32_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-09-01 17:34:092026-08-24 16:34:04Calibrate and Use Third Party Hardware with SoundCheck (100 Things #32)

Protect and Autoprotect Sequence Data (100 Things #31)

August 25, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

By default, SoundCheck overwrites any data that isn’t protected or saved after each subsequent run of your sequence, or if the program is closed. However, it’s easy to configure your tests to  protect and autoprotect your measurement data so that subsequent runs of your sequences don’t overwrite any of your existing test results. Watch this short video to learn about different configuration options.

Protecting and Autoprotecting Sequence Data in SoundCheck

Learn More About SoundCheck’s Advanced Features

Read on about more measurement features in SoundCheck.

More information is also available in the  SoundCheck Manual.

 

Video Script: Protect and Autoprotect Sequence Data

Soundcheck allows you to protect Items in the Memory List, so that subsequent runs of your sequences don’t overwrite any of your existing test data. By default, SoundCheck overwrites any data that isn’t protected or saved after each subsequent run of your sequence, or if the program is closed.

If you want to keep data and not overwrite it, you can simply select the data from an individual run of the sequence in the memory list and protect it, or , in your sequence you can auto protect the data, which will automatically save data for each and every iteration of the sequence.

Using the Memory List Sorting and Grouping functions, SoundCheck can save all protected and auto protected data to its own Auto Group in the Memory List, making it easy to distinguish what data is protected when recalling a sequence.

Here we are looking at a looping sequence in which pink noise is played back starting at -40dB, and increases in amplitude in 5dB steps for five passes.

Normally, after each run of the sequence, the data previously displayed is overwritten with data from the current run of the sequence. Once I select my recorded data in the Memory List, and right-click to select “Protect” it, that data and only that data will remain in the memory list and displayed on my graph.

If I instead choose to Auto Protect any chosen values, after every run of my sequence, the data for those values is appended in the memory list, and the five new curves are added to my display. This data isn’t deleted from the memory list unless you manually delete it, or if you discard it when closing SoundCheck.

This enables you  to access and recall the data outside of the sequence in which it was originally recorded. Even live curves, created by the RTA, can be protected.

 

 

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_31_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-08-25 11:21:192026-08-26 15:44:03Protect and Autoprotect Sequence Data (100 Things #31)
Page 7 of 11«‹56789›»

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top