Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

USB Headset Measurement

August 19, 2026/in Audio Measurement Videos, Blog, Headphone & Headset Videos/by Julius Wijono

How do you measure USB headsets? In this short video, we demonstrate how to measure USB headsets using SoundCheck. You’ll see how to configure digital input and output channels, set up the headset in the hardware editor, and perform measurements including left and right earphone frequency response, THD, sensitivity, and microphone performance. This method can be used for any USB audio device, making it easy to accurately evaluate both playback and recording performance.

Watch this Video Demo of Measuring a USB Headset

Learn More about USB Headsets

    • USB Headset Input/Output Test Sequence: https://www.listeninc.com/resources/test-sequences/usb-headset_input_output_sequence/

Video Transcript: How to Measure USB Headsets

Today I’m going to demonstrate how we can measure a USB headset using SoundCheck. We’ll test both the left and right ears and the microphone.

SoundCheck supports both analog and digital inputs and outputs, so to test a USB headset, all we need to do is plug it into our computer’s USB port and configure a new digital channel in the hardware setup, then we can test it just like a conventional headset. 

Let’s review our setup. We’ll use a head and torso simulator to capture the headset’s response, and I’m powering that with a SoundConnect 2 power supply. The microphones within HATS transmit the signal to the computer via the AmpConnect 621 Audio Interface, and that also has a built-in amplifier to power the HATS mouth, which we need for the microphone test.

First, I’ll configure the USB headset in SoundCheck. We do this in the Hardware Setup. You can see here we already have the input and output channels of the AmpConnect 621 configured  – it’s full plug and play so that happens automatically. 

I’ll plug the USB headset into the USB port of my laptop. In the hardware editor, I’ll right click to create an input channel. I’ll set it to use the Windows WDM driver, and now it shows me all the available devices. We see the headset mic there – let’s set the type to digital. Since it’s digital we don’t need to enter anything in the calibration field. I’ll leave the sampling rate as the default, as my audio interface is using this value. We’ll also do the same for the outputs. We’ll set the driver and pick the device, there’s 2 channels so we’ll set these to left and right, and again it’s a digital device. 

First we’ll measure the headphone response, and we’ll use the USB headset test sequence that’s available for free on our website. 

When we open our sequence, it prompts us to re-link the signal paths used in the sequence. Let’s add them to system calibration.

And now we need to assign hardware channels and calibration files. It’s warning me that the signal paths I just added don’t have associated hardware channels and calibration data, so we’ll click through all of those so we can add them. Here’s our signal paths.

We’ll assign signal paths digital out 1 and 2 to USB Headset out L and R. Since these are digital outputs the calibration is unity digital out

Now we’ll do the same for the input headset sequence. We’ll set Digital In 1 to the USB headset and calibration to unity digital in

Let’s just do a quick check and make sure all our signal paths are correct. It’s looking good

So now we’re all set up and ready to measure. 

Let’s hit start. 

The sequence plays our test stimulus, and it gives us the left and right frequency response, and also the THD for the left and right earphone. Over here we see the waveforms, the left and right recorded response, and down here we calculate our average sensitivity. Sensitivity is a useful production line test to confirm that the average level across a bunch of headphones is reasonably stable. If the sensitivity swings dramatically in either direction from sample-to-sample, it can indicate a quality problem in manufacturing. We also show the left/right tracking – that’s the difference in sensitivity between the left and right ear over the frequency range.

Now we have some results, let’s take a look behind the scenes at what our test sequence is doing.

We’re using a Stweep that sweeps from 20 kHz down to 100 hertz at 12th octave resolution. This is a compound stimulus with a very short, 1kHz pilot tone, before the Stweep. The pilot tone isn’t analyzed, but we use it in this frequency shift step here  to align the time and phase of the response signal with the stimulus before we analyze it.

This feature ensures accurate analysis. It compensates for any unknown phase differences that are introduced from the stimulus and response being played through different hardware devices – the stimulus is played through the laptop via USB, and the response is recorded through our audio interface.

Next, our analysis step compares the stimulus waveform with the frequency-shifted version of the response waveform to get the fundamental. There’s also a post-processing curve averaging step that calculates the average sensitivity.

Lastly, the display step that defines what graphs and results are shown. So that’s the earphones, now let’s test the microphone. We’re already connected and set up, so I’ll tell the sequence to continue and measure the microphone.

So that’s the earphones, now let’s test the microphone. We’re already connected and set up, so I’ll swap over to the microphone test sequence and measure the microphone.

We heard our test stimulus coming out of the HATS mouth, and being recorded by the headset microphone. And here we can see the frequency response and sensitivity of the microphone.

And if we look at the sequence, we can see it’s very similar to the headphone. We’re using an 8 Khz to 100Hz test stimulus, again with a trigger tone to align our stimulus and response waveforms. We have our frequency shift calculation, just like before. Then our analysis step to calculate  frequency response, and also a post-processing step to calculate sensitivity. And of course we have a display step to determine what is shown on screen.As you can see, because SoundCheck supports any combination of analog and digital audio devices, it’s very simple to measure a USB headset. All you need to do is make sure you have it set up as a hardware device in SoundCheck, and use a compound stimulus and frequency shift step to align your waveforms before analysis. You can measure any other USB connected audio device in the same way. Check out our website to learn more and download the SoundCheck test sequence.

https://www.listeninc.com/wp/media/2026/08/USB-Headset-Demo-TN-scaled.png 1440 2560 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2026-08-19 09:27:542026-08-19 09:32:58USB Headset Measurement

ANC Headphones Audio Measurement

November 4, 2025/in Audio Measurement Videos, Blog, Headphone & Headset Videos/by Julius Wijono

How do you measure ANC headphones? In this video, we show how to measure active noise cancellation (ANC) performance using SoundCheck. You’ll learn how to test unoccluded, passive, and active responses with a head and torso simulator (HATS), an AmpConnect 621 audio interface, a SoundConnect 2 power supply, and pink noise source to calculate total noise attenuation. This simple setup can also be expanded for real-time ANC analysis or used to measure THD and distortion caused by ANC circuits.

Watch this Video Demo of Measuring ANC Headphones

Learn More about ANC Sequences

    • Noise-Cancelling Headphones Test Sequence: https://www.listeninc.com/products/test-sequences/free/noise-cancelling-headphones-test-sequence/

Video Transcript: How to Measure ANC Headphones

Today I’m going to show you how to measure active noise cancellation performance, or ANC, of headphones.

The set-up is simple. I’m using SoundCheck to generate the test signals and analyze the results. I have a head and torso simulator to capture the ear’s response. I’m using an AmpConnect 621 audio interface which also provides amplification for the speaker… and I have a SoundConnect 2 microphone power supply to power the mics in the head and torso simulator. If I was using a newer HATS with IEPE mics, I wouldn’t need this – I could power it directly from the AmpConnect. I’ve got a basic speaker here to generate the pink noise that we’ll use to measure the noise cancellation, and I have a nice pair of noise-canceling headphones.

We’ll play pink noise from this speaker. First we’ll measure the unoccluded ear response, then the passive response. That’s with the headphones on the ear but not turned on. Then we’ll turn on the ANC and measure the total attenuation – the full effect of the active and passive isolation.

Let’s run our test sequence. First we’ll take the unoccluded measurement without headphones. You’ll hear the pink noise playing, and we’ll see our measurement on the graph.

There we go…

Now the sequence pauses while we put the headphones on.

Next we’ll play the pink noise. I’m going to adjust the headphones to establish a good seal. Typically you would make this measurement 5 times and average it to account for variation in fit, but I’m just going to do it once in this demo.

Now let’s continue.  [pink noise plays]

So now we have the occluded measurement – that’s telling us how much sound the headphones are passively attenuating just from their materials and geometry.

Now we’re going to turn on the ANC and let the sequence continue….

Here we have the measurement with ANC turned on.

And you can see on the top graph here, we show the sound pressure level for the unoccluded measurement, the occluded measurement, and the measurement with ANC turned on. And this bottom graph here uses a simple calculation to show the passive, active, and total noise attenuation of the headphone.

That’s the test in its simplest form. You can get more fancy with your speaker setup. For example, instead of using just one source speaker, you could use multiple equalized source speakers to create a more realistic spatial background noise environment. You could also measure both ears at the same time. If you do this, you can use SoundChecks multichannel RTA to check for fit – you just measure the two channels simultaneously and make sure the left and right are showing similar responses. This saves time as you don’t need to make multiple measurements.

You could also use the multichannel RTA to look at how noise attenuation changes in real time. You’d need an external reference measurement microphone positioned here, outside the headphone, and you could play complex signals, like real recorded background noise from an airplane and watch in real time how the noise attenuation changes. This gives a more realistic representation of how the ANC circuit responds to dynamic signals.  

This set up is good for much more than just measuring active noise cancellations. We’ve done a lot of research on audio distortion caused by active noise cancellation. With the same setup, but different test sequences, you can measure THD, intermodulation distortion, time-variant distortion and more. Check out the technical papers on our website to learn more.

https://www.listeninc.com/wp/media/2025/11/ANC-Headphones-TN-scaled.png 1440 2560 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-11-04 05:00:072026-08-27 15:09:51ANC Headphones Audio Measurement

Bluetooth Earbud Test Measurement

January 14, 2025/in Audio Measurement Videos, Blog, Headphone & Headset Videos/by Julius Wijono

How do you measure Bluetooth earbuds? In this short video, we demonstrate how to measure Bluetooth earbuds using SoundCheck. You’ll see how to pair the earbuds, ensure a proper fit for accurate results, and configure SoundCheck for measurements including left and right earphone frequency response, THD, send response of the microphone, and distortion. This method can be used for any Bluetooth audio device, from true wireless earbuds to professional over-ear headphones.

Watch this Video Demo of Bluetooth Acoustic Measurements on Headphones / Earbuds

Learn More about How to Test Earbuds and Bluetooth Audio Measurements

Here are some additional resources:

  • Free Headphone Test Sequences: https://www.listeninc.com/products/test-sequences/free/#headphones

Video Transcript: How to Test Bluetooth Earbuds

 In this short video I’m going to show you how simple it is to measure a pair of Bluetooth earbuds using SoundCheck and our free Bluetooth headphone sequence.

We’re going to use a head and torso simulator for the most realistic representation of how a human would hear. If this is outside your budget , you can use a simpler headphone test fixture or an ear coupler. I’ll use the Portland tool and die Bluetooth interface to pair to the earphones and AudioConnect 2 will connect and power the TEDs microphones inside the ear simulators, as well as the SCM mic that I used to calibrate the mouth simulator.

We’ll measure the left and right earphone frequency response, THD, send response of the microphone, and I’ll also show the difference between Left and Right earphones.

I already have SoundCheck up and running on my laptop, with our standard headphone measurement sequence that you can download from our website.

When I hit start, it asks if I want to pair my Bluetooth headphone… I’ll say ‘yes’ and turn on pairing mode … the white light is flashing …. and the Bluetooth Interface is searching for any devices that are open for pairing. We see the airpod pros here so I just hit OK…and once I’m connected the light turns green to show it’s paired.

Now the sequence is prompting to insert the earphones… I’ll put them in… and it wants  to check the seal. This is important to make sure there is a good fit – you’re going to need that to get good bass output. I’m going to say ‘yes’ and now the sequence is bringing up the signal generator playing pink noise in both ears. We can see the real time analyzer is showing the frequency response of both left and right ear. I have a good seal on my right but not on my left ear so I’ve got to adjust that a little to get a snug fit.

Now that I have a good seal on both ears, I can continue and we’re ready to measure.

We’re using a stepped sine in 12th octave frequency resolution from 20 Hertz to 20 kilohertz and we’ll see the frequency response as well as the diffuse field corrected response, which takes into account the ear simulators’ response on hats.

Here’s our results. We can see the frequency response – the green and red lines for left and right ear, and the diffuse field corrected, the purple line. Ideally this should be more or less flat when we subtract out the ear simulator, so this looks pretty good. 

Down below we see the difference between the left and right ear, the tracking. Ideally this would be zero, but we have a little notch here so there’s a small difference. On the bottom graph we have total harmonic distortion for the left and right ear.

Now it’s asking if I want to measure the microphone response otherwise known as the send response, and I say yes. We’ll hear pink noise played out of the mouth, and we will get the frequency response of the microphone 

So essentially I’m done now and it’s checking if I want to save the results. I also have information about the sensitivity of my earbuds and their microphone. That’s a very basic Bluetooth headphone test – there are many other measurements we can make on headphones and earbuds, and we’ll show you those in another video.

As you can see, measuring Bluetooth earbuds, or any type of Bluetooth headphone, is quick and easy with SoundCheck. If you’d like to give it a try, contact us for a demo!

https://www.listeninc.com/wp/media/2025/01/Earbud-Demo-TN-Final.png 1080 1920 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-01-14 13:38:282026-08-28 14:33:08Bluetooth Earbud Test Measurement

Measuring Audio Leakage From A VR Headset (100 Things #82)

September 7, 2023/in 100 Things Videos, Blog, Headphone & Headset Videos/by Devin Vaillancourt

Virtual Reality Headsets may be new to the market, but users already expect excellent sound quality to enhance the immersive experience. SoundCheck’s flexibility means you can measure almost any device including VR headsets, by leveraging it’s step-based sequence functionality. VR headset measurements can be made with the same parameters as any other headset; frequency response, perceptual distortion, phase, and more. With the addition of the MDT-4000 turntable, headset audio leakage can be measured to better quantify what people nearby would hear from a user’s VR headset.

Measuring Audio Leakage From A VR Headset

Try VR headset measurements for yourself

Our pre-written VR Headset Leakage Measurement sequence takes the guesswork out of VR headset measurements, with commands pre-programmed to work with the PT&D MDT-4000 turntable.

Video Script:

Virtual Reality and Augmented reality headset measurements are made in pretty much the same way as other headphone and headset measurements. However, one thing to be aware of is that VR and AR headsets often have the speakers located in the headband. This means that you need to use a head and torso simulator where the speaker can be in a realistic position relative to the ear, rather than lower cost couplers or headphone test jigs that rely on the headphone sitting directly in, or on the fixture to create a tight seal. 

With this setup, you can use any of our standard headphone test sequences to measure frequency response, phase, distortion, impedance, sensitivity and other parameters.

Another measurement that is particularly useful for virtual reality headset characterization is headset leakage. With the speakers unoccluded on the headband – not sealed on the ear canal –  there can be considerable acoustic leakage, and designers try to minimize the noise emanating from the device so as not to annoy other listeners nearby. 

Here, we’ll use a measurement microphone to simulate what the nearby listener hears from the person wearing the VR headset and a turntable to produce a polar plot showing the level of leakage from the VR headset versus angle. You can set the microphone position to whatever distance you want to measure, and define the test level. When we run the sequence, it plays a test signal and the microphone records the acoustic leakage. The turntable then rotates through 10 degrees and re-measures. We repeat this through 180 degrees, and mirror the results to get a full 360 degrees plot. This test sequence also shows the frequency response at each angle. This sequence is available free of charge on our website if you want to try it out.

https://www.listeninc.com/wp/media/2023/09/100-things-82-thumbnail.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2023-09-07 08:30:402026-08-21 15:22:14Measuring Audio Leakage From A VR Headset (100 Things #82)

Headphone Measurements Demonstrations

June 19, 2023/in Headphone & Headset Videos/by Zarina

In this short video, Steve Temme demonstrates two different headphone measurements with SoundCheck.

In the first demo, he measures a pair of Bluetooth earbuds in an open loop test to obtain frequency response, left/right tracking, THD and sensitivity. He also measures frequency response and sensitivity for the built-in microphone. In the second demonstration, he measures both active and passive noise cancellation of a pair of over the ear headphones with pink noise and speech.

These measurements are made with SoundCheck, the AudioConnect audio interface and the PQC-4149 Bluetooth interface. The SoundCheck test sequences to run these tests are available free of charge on our website.

Headphone measurements demonstrated include:

  • Headphone frequency response
  • Headphone left/right tracking (L/R tracking)
  • Total Harmonic Distortion (THD)
  • Sensitivity
  • Microphone frequency response
  • Microphone sensitivity
  • Active noise cancellation with pink noise and speech
  • Passive noise cancellation with pink noise and speech
  • Total noise cancellation with pink noise and speech

Presenter: Steve Temme
Duration: 10 Mins

Headphone Measurement Resources

Learn more about our headphone complete test sequence (available in the sequences folder of your SoundCheck installation).

Try our ANC Headphone measurement test sequence

Check out our main pages on Headphone Testing, Bluetooth Headphone Testing and ANC Headphone measurements, which includes links to test sequences, relevant products and more.

 

 

https://www.listeninc.com/wp/media/2023/03/Bluetooth_headphone_test.png 1189 972 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2023-06-19 20:39:532026-08-28 15:11:21Headphone Measurements Demonstrations

Measuring Active and Passive Noise Cancellation for Hearing Protection (100 Things #67)

May 25, 2023/in 100 Things Videos, Blog, Headphone & Headset Videos/by Devin Vaillancourt

SoundCheck makes testing to standards simple by automating precise measurements into a single sequence. In this test sequence hearing protection devices can be tested to the ANSI S3.19-1974 standard to find their NRR rating. Sequences in SoundCheck make testing simple, with message steps instructing operators when interaction is needed with removing or placing hearing protection DUTs, for example. ListenInc.com features an extensive list of pre-written test sequences for any application including noise protection devices, hearing aids, bluetooth devices, and more.

Measuring Active and Passive Noise Cancellation for Hearing Protection

Try our hearing protection sequence for yourself

The hearing protection measurement sequence featured in this video is available in our sequence library.

Video Script:

Did you know that you can test hearing protection devices to industry standards using SoundCheck? Let’s take a look. 

Hearing protection devices are often measured to the ANSI S3.19-1974 standard which measures the Noise Reduction Rating or NRR of the device. This rating is a numerical representation of the device’s sound attenuation.

Our test sequence first measures the response spectrum of the unoccluded hearing protector test fixture, then makes a second measurement with the hearing protection DUT affixed. SoundCheck’s signal generator generates the pink noise stimulus while its Real Time Analyzer simultaneously records the A and C weighted noise spectrums. The unoccluded and occluded measurements are analyzed with a series of post-processing steps according to the ANSI S3.19-1974 standard. The final display shows the NRR numerical value, RTA spectra of the left and right side of the unoccluded and occluded hearing test fixture, average attenuation level of the DUT, and the standard deviation of the DUT on the test fixture.  The sequence prompts the user to recall previously saved unoccluded measurements and standard deviation values, saving time if the test fixture and DUT have been measured previously. When a new unoccluded measurement is taken, the user can save these measurements for a future data recall. 

We have many SoundCheck test sequences written by experts to  save hours of time writing them yourself. Most of these, including this NRR sequence, are free to use and come with well written step-by-step instructions.

https://www.listeninc.com/wp/media/2023/08/100-things-67-thumbnail.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2023-05-25 08:30:172026-08-21 13:53:51Measuring Active and Passive Noise Cancellation for Hearing Protection (100 Things #67)

Measuring Headphone Active Noise Cancellation in Real Time (100 Things #57)

March 16, 2023/in 100 Things Videos, Blog, Headphone & Headset Videos/by Devin Vaillancourt

Active Noise Cancellation technology is more advanced than ever, and SoundCheck is well-equipped with all the features needed for measuring headphone active noise cancellation. We have a pre-written test sequence to measure all aspects of noise cancellation including passive, active, and total noise attenuation. This sequence is a great fully complete test, or you can use it as a template to expand your test setup to include multiple background noise sources, or add an additional microphone for an even more detailed test of how the ANC circuit responds to dynamic signals.

Measuring Headphone Active Noise Cancellation in Real Time

Try ANC headphone measurements for yourself

Find our free sequence for measuring Noise-Cancelling Headphones here. This sequence first measures the passive attenuation of the headphones, then the active attenuation, and finally calculates the total attenuation.

Video Script:

Did you know you can measure headphone Active Noise Cancellation with SoundCheck, as well as standard acoustic tests such as frequency response and distortion? When measuring noise canceling headphones there are three important measurements to make: passive attenuation, active attenuation, and total attenuation. Passive Attenuation is the amount of noise the headphones block without ANC enabled. Active Attenuation is the amount of noise ANC blocks out. Total Attenuation is the combination of the two measurements.

We even have a pre-written sequence showing off this functionality, called Noise Canceling Headphones, available on our website. You will need a Head and Torso Simulator (HATS) or an acoustic ear simulator with an artificial pinna, at least one speaker for background noise generation, and a set of headphones with ANC.

The first measurement is taken without headphones on the HATS, the unoccluded measurement. The pink noise stimulus is played out of the speakers, and the signal from the HATS is recorded. Next, the sequence pauses while the operator places the headphones on the HATS, then makes the occluded measurement. The sequence again pauses for the operator to enable the headphone’s active noise cancellation, and The third measurement is taken, and the results are calculated.

This test can be modified to work with a diffuse, multi-speaker configuration, and in an environment with two or more speakers, both ears could be measured at the same time. Our new AmpConnect 621 interface has six inputs, and two outputs so you can even measure both the left and right channel simultaneously, while also generating stereo background noise. Using SoundCheck’s new Multichannel RTA, you can measure the acoustic seal  of both the left and right headphone channels simultaneously, and even visualize it in real time. Also, with the Multi-RTA and an external reference measurement microphone positioned immediately next to the outside of the headphone, you can play any complex signal you like out of the source speaker(s) such as real recorded background noise from an airplane and watch in real time how the noise attenuation changes. This is a more realistic representation of how the ANC circuit responds to dynamic signals.  

There are many ways you can modify this sequence, for example, instead of playing out of one source speaker, play out of multiple equalized source speakers to create a more realistic spatial background noise environment. With the new Signal generator’s delay offset feature, this is much easier to do.

How do you measure active noise cancellation? And what are your favorite noise-canceling headphones? Let us know in the comments below! And for more information on all things SoundCheck, head to our website at ListenInc.com.

https://www.listeninc.com/wp/media/2023/10/100-things-57-thumbnail.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2023-03-16 08:30:002026-08-21 13:10:18Measuring Headphone Active Noise Cancellation in Real Time (100 Things #57)

Easily Measure Headphones to EN 50332 with a Pre-written Sequence (100 Things #41)

November 3, 2022/in 100 Things Videos, Blog, Headphone & Headset Videos/by Devin Vaillancourt

We provide many pre-written sequences for testing to standards across many applications, including a suite of sequences testing to the EN 50332 Standard. This test suite consists of two parts to accurately measure the device and included headphones, together and separately. All of the sequence development work has been done, saving your hours of sequence writing. These sequences also include operator instructions, making headphone adjustments on a head and torso simulator easy. You can test in confidence knowing this sequence suite includes everything you need to get up and running fast.

Easily Measure Headphones to EN 50332 with a Pre-written Sequence

Try EN 50332 for yourself

We offer two sequences testing to the EN 50332 standard: EN 50332-1 and EN 50332-2. These sequences are pre-written and ready to run.

Video Script:

Did you know we offer a test sequence for measuring headphones headphones and earphones associated with portable audio equipment to the European standard, EN50332?

This standard specifies the maximum sound pressure level and input / output voltage measurements for portable audio playback devices. These characteristics are usually evaluated at the design and engineering stage as compliance is mandatory in many countries.

Our off-the-shelf test sequence saves hours of development time, and ensures that measurements  are correctly made.

The standard consists of two parts.

Part 1 measures the portable music players together with the headphones they are bundled with. In this measurement, we load an IEC 268 weighted pink noise stimulus file onto the portable device and play it through the earphones at maximum volume. 

The earphones are positioned on a head and torso simulator, or HATS. We record the signal from each ear, and a 1/3rd octave curve is analyzed. A-weighting and free field correction for the HATS are applied, the values between 20 Hz and 20 kHz summed, and the A-weighted equivalent sound pressure level is calculated.

The sequence runs 5 times, with the headphones repositioned between each measurement to average out any variability in the fit and sealing of the device under test. We average these measurements to calculate the final LA eq values.

In part 2, the portable device and the headphones are measured separately. 

To test the music player, we load a weighted pink noise stimulus file onto the portable device and play it through the headphone jack connected to a 32 ohm load at maximum volume. The RMS voltage is averaged over 30 seconds, and the result must be less than 150 mV.

The headphone test is a little more complex. We connect the headphones to an amplifier with less than 2 ohms output impedance. The amplifier’s outputs are split, connecting one side to the headphone and the other directly to the audio interface. This lets us measure the voltage at the headphone while the amplifier is under load. You can see here we are using the AmpConnect 621 audio interface as we need at least 4 inputs – 2 are connected to the amplifier outputs and the other two to the HATS ears via the microphone preamps.

First the electrical loopback from the amplifier is used to measure the amp’s gain using the IEC weighted pink noise file, and this is used as calibration data for the subsequent measurements.

We then put headphones on the HATS and play noise while monitoring the signal through the ears on the multimeters to position the headphones for maximum output.

Next, we play IEC weighted pink noise at 50 mV while the signal from each ear is recorded, and a 1/3rd octave curve is analyzed. As before, A-weighting and free field corrections are applied and the values summed from 20 Hz to 20 kHz to indicate the overall weighted sound pressure level. 

Finally, the ratio between stimulus level and sound pressure level is used to calculate the stimulus level required to produce 94 dBSPL at the ears. This value, the wide band characteristic voltage or WBCV, must be greater than 75mV to comply with the standard.

So that’s how easy it is. You could of course program this from scratch yourself in SoundCheck, but the pre-written sequence will save you hours!

https://www.listeninc.com/wp/media/2023/10/100-things-thumbnail-41.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2022-11-03 08:30:142026-08-21 13:38:13Easily Measure Headphones to EN 50332 with a Pre-written Sequence (100 Things #41)

Digital Measurements – USB Headphones & Microphones (100 Things #38)

October 13, 2022/in 100 Things Videos, Blog, Headphone & Headset Videos, Measurement Techniques Videos, Microphone Videos/by Zarina

SoundCheck’s testing capabilities go beyond the analog domain. It has always been able to measure digital devices and make both analog and digital domain audio measurements simultaneously on different channels. The digital inputs and outputs inside SoundCheck are easily configured to measure USB Headsets, MEMS microphones and so on. Watch this short video to learn more.

Measuring Digital Devices with SoundCheck

Learn More About SoundCheck’s Signal Generator and other Virtual Instruments

Check out our pre-written test sequence on measuring digital MEMS microphones

 

Video Script: Measuring Digital Devices such as USB Headphones & Microphones in SoundCheck

When we talk about measuring traditional transducers such as microphones and loudspeakers, we are measuring analog devices that respond to voltage and pressure. Nowadays, most microphones and loudspeakers have become quasi analog/digital devices because their analog signals are immediately transformed into the digital domain built into the design and transducer package.  With digital devices dominating the consumer electronics market today, have you wondered if you can set up digital inputs and outputs inside SoundCheck to measure USB Headsets, MEMS microphones and so on? The answer is yes.

SoundCheck supports both analog and digital inputs and outputs for measurement. Setting up digital inputs and outputs is very straightforward. All you need to do is create a new digital channel on your Hardware editor, set it to  input or output and select the appropriate digital calibration reference e.g. AES-17 when configuring the signal path inside the calibration editor. It is as simple as that and you should be ready to use your connected digital device to make audio measurements.

The digital interface can be as simple as a USB headset plugged in directly to your computer or a device plugged into a supported audio interface, or as complex as a bunch of MEMS microphones going through a digital circuit board before interfacing with the test system. You can also use a USB headphone as an input monitor if your audio interface doesn’t have one, and analog and digital inputs and outputs can be used simultaneously.

SoundCheck offers great flexibility for testing both analog and digital devices. If you’d like to take a closer look at how this works, please contact your sales engineer for a demo.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_38_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-10-13 15:04:172026-08-21 15:17:24Digital Measurements – USB Headphones & Microphones (100 Things #38)

Comparing Measured Data to a Target Curve (100 Things #33)

September 8, 2022/in 100 Things Videos, Blog, Headphone & Headset Videos, Measurement Techniques Videos, SoundCheck Functionality Videos/by Zarina

You can import any target curve into SoundCheck. This enables quick and easy comparison of your measured data to any reference data.

Comparing Measured Data to Target Curves in SoundCheck

More Target Curve Resources

To see an example of using Target Curves in SoundCheck, take a look at the work we’ve done with the Harman Target Curve. This page also links to the sequence that you can download to use with SoundCheck.

 

Video Script: Comparing Measured Data to Target Curves

Did you know that you can import any target curve in SoundCheck? This lets you compare your measured data to any reference data, fast and easy.

This functionality is simple to use – simply import the curve into the memory list and from there, use it in a sequence or drag and drop it onto any graph.

One of the simplest examples of this capability is to compare measured results to a golden unit.  All you have to do is  import the data from the golden unit into the memory list, then plot it on the same graph as the measured unit. You can use mathematical functions to statistically compare the curves, or you can use the curve offset by a fixed dB level, and use it as a limit.

Another example is live tuning. Matching a frequency response and sound pressure level is a common audio test, from measuring loudspeakers in a shop environment to tuning an automotive infotainment system. In these tests, you can compare RTA generated live curves to the imported target curve, and adjust the microphone location or manipulate the sound source in real time to match the target curve.

We also offer a more advanced application of target curves in a free test sequence that calculates a listener preference rating for headphones based on the Harman Target curve, developed by Sean Olive. This sequence measures the frequency response of your headphones and calculates an error curve, which is derived from subtracting the Harman Target Curve from an average of the headphone left/right response. The standard deviation, slope and average of the Error curve are used to calculate the predicted preference score.

So whether you are performing real-time measurements with live curves, setting limits based on golden units, or predicting listener preference of headphones, SoundCheck’s curve-importing capability makes your audio testing easier.

 

 

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_33_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-09-08 17:01:452026-08-21 14:44:34Comparing Measured Data to a Target Curve (100 Things #33)
Page 1 of 212

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top