Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

100 Things you didn’t know about SoundCheck videos

SoundCheck Supports Multiple Interfaces for Ultimate Flexibility (100 Things #50)

January 26, 2023/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

SoundCheck is built on flexibility, and it’s hardware compatibility is no exception. SoundCheck supports multiple audio interfaces and devices, all simultaneously. Freely combine and measure with analog and digital interfaces together. Use a Listen interface like AmpConnect 621, and pair it with an A2B, I2S, or Bluetooth interface for highly customizable tests.

Audio Interface Options in SoundCheck

Learn more about SoundCheck’s Interface & Device Options

Listen’s Audio Interfaces.

Why did we design our own hardware: A look into why our in-house designed and manufactured audio interfaces offer advantages over off-the-shelf products.

Audio over IP with Dante interfaces.

Testing Automotive Audio Via A2B Interfaces.

Testing MEMS Devices with a MEMS Interface.

Using Bluetooth Interfaces with SoundCheck.

 

Video Script: Soundcheck Supports Multiple Interfaces for Ultimate Flexibility

Since 1995, SoundCheck has supported the use of external sound cards and audio interfaces. But did you know that SoundCheck can support multiple audio interfaces and other audio devices simultaneously giving you ultimate flexibility for a wide range of audio test applications?

Here are some examples of test applications that take advantage of this flexibility:

Add additional audio interfaces to expand your channel input and output count, for up to 64 channels of input and output

For example, add Bluetooth, Digital MEMS, I2S, A2B interfaces and even Dante to test these devices

Directly connect a USB audio device like a USB headset, microphone or speaker to test these devices

On Windows OS, SoundCheck supports a wide range of audio drivers including WDM/MME, ASIO, WASAPI, NiDAQ (if using National Instruments hardware) and even Dante. On MacOS, SoundCheck supports CoreAudio. As long as your audio device has an input or output path through a compatible audio driver in SoundCheck, it can be used as an audio source or destination for testing in SoundCheck. Furthermore, SoundCheck can easily support mixed analog and digital signals simultaneously as well as  hardware with different sampling rates.

Let’s look at a hardware setup window in SoundCheck fully exploiting this capability. In my hardware setup you can see a Listen multi channel AmpConnect 621, a BQC-4149 Bluetooth interface, an A2B interface and a USB headset all peacefully coexisting. Note: these devices use different audio drivers, mixed analog and digital signals and even different sampling rates.

With SoundCheck’s auto-delay algorithm, we can even account for latency differences outputting from one hardware device and inputting from another. For example, delays from transmitting a test stimulus to a Bluetooth device like a speaker or headphone.

SoundCheck also has resample and frequency shift post-processing steps to correct for sample rate mismatch and/or hardware clock phase differences as a result of inputting and outputting from different hardware interfaces. This means we can resample and phase align the test stimulus and response prior to analysis to assure accurate measurements.

If you’d like to verify if your device can be used with SoundCheck,  please give us a shout and we’ll check it out!

 

https://www.listeninc.com/wp/media/2023/11/100_things_50_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2023-01-26 13:27:492026-08-24 16:24:21SoundCheck Supports Multiple Interfaces for Ultimate Flexibility (100 Things #50)

Save Test Time by Automating With Sequence Looping (100 Things #49)

January 19, 2023/in 100 Things Videos, Blog, Measurement Techniques Videos, SoundCheck Functionality Videos/by Zarina

Save both sequence development and test time by using sequence looping to run repetitive test elements in a sequence. This is valuable for any kind of test where you need to repeatedly change a test parameter, for example, increase stimulus level by 5dB and re-test, make measurements at multiple fixed frequencies or frequency sweeps, or even move a turntable and re-measure a device to create polar plots.

Automating SoundCheck Tests with Sequence Looping

Learn More About Implementing Sequence Looping

Check out our easy-to-follow tutorials on sequence looping.

More information is also available in the SoundCheck Manual.

 

Video Script: Save Test Time by Automating With Sequence Looping

Sequence looping is a useful technique that saves both sequence writing time and test time by running repetitive test elements in a loop within a sequence. This is valuable for any kind of test where you need to repeatedly change a test parameter, for example, increase stimulus level by 5dB and re-test, make measurements at multiple fixed frequencies or frequency sweeps, or even move a turntable and re-measure a device to create polar plots.

Using sequence loops instead of hard-coding each sequence step offers many advantages. It keeps your sequence shorter and easier to read, and the sequence logic is clearer. It’s much faster to program and easier to update, because if  test parameters change, they only need updating in one place. In many cases it removes the need for manual user-input while the sequence is running, making your test much faster. There are many other benefits too. Data in the memory list can be automatically named using the loop index, for example, by appending data such as stimulus of frequency level to the curve name, and you can even use loops to prompt an operator to change device settings between measurements.

Here’s a simple example where we use a basic loop to increment the stimulus level by 10dB each time and plot all the measurements on the same graph. You can see it looping through the sequence, automatically naming the curves and adding to the memory list, and plotting them on a graph.

Where it gets really useful is when you start to apply sequence logic. Using commands such as “jump on pass” and “jump on fail” you can determine the next steps in the sequence based on the results of the measurement. For example, if the device passes the test you can increment the level and re-measure, and if it fails you could decrease the level and repeat the test, or end the test and produce a report. You can also nest loops for more complex test procedures. You can see this being put to good use in our AES-75 test sequence. This determines the maximum SPL of a loudspeaker using multiple loops and logic to repeat a measurement at different levels, and compares the results to a baseline measurement to determine the next sequence step.

SoundCheck’s looping capability even extends to working with previously saved data, where it can iterate through a set of files in a folder, applying post-processing calculations, statistical analyses and more, and displaying the results in a user-defined way. This is a standard feature in SoundCheck, and its been available in all versions for over 20 years!. Check out SoundCheck tutorial #7 on our Youtube channel if you want to learn more about how to use this useful feature!

 

https://www.listeninc.com/wp/media/2023/11/100_things_49_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2023-01-19 11:42:062025-01-21 16:54:07Save Test Time by Automating With Sequence Looping (100 Things #49)

SoundCheck Supports Unlimited Virtual Instruments (100 Things #48)

January 12, 2023/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

SoundCheck introduced the concept of virtual audio analysis instruments to the world in 1997, and has continued to expand and develop their functionality since then. It supports an unlimited number of virtual instruments, including signal generators, multimeters, multi-channel RTAs and spectrum analyzers, and more. The use of multiple instruments simultaneously is demonstrated in this short video.

Unlimited Virtual Instruments in SoundCheck

Learn More About SoundCheck’s VIs

Check out our easy-to-follow tutorials on virtual instruments. (in the Acquisition section)

Watch our video on how to save time with virtual instrument configuration.

More information is also available in the SoundCheck Manual.

 

Video Script: SoundCheck Supports Unlimited Virtual Instruments

Since 1997, SoundCheck has supported the use of software virtual instruments, also known as VI’s. VI’s are software versions of hardware bench tools like signal generators, multimeters, spectrum analyzers, etc. They’re used for taking a quick measurement in SoundCheck, or in combination with SoundCheck’s sequence editor in a virtual instrument acquisition step. Most importantly, VIs can replace the need for dedicated hardware instruments which can be bulky and expensive. This is particularly useful if you need to travel with your audio test setup.

For  quick measurements or signal tests in SoundCheck, you may only need to open 1 or 2 VIs at a time. However, did you know that SoundCheck supports unlimited VIs? This is useful if you need  to perform multichannel or complex test applications.  For example, in this  setup, I’m  using multiple signal generators to playback noise to a multi-speaker simulated background noise environment. I can open as many signal generators as needed. I can also simultaneously monitor input as well.

Here’s I’m using multiple reference mics in a 6 mic array for making automotive measurements. I have 6 separate multimeters averaging input from each mic source, but I can also monitor the same input via the multi-RTA and even power sum the sources. Multichannel virtual instruments, such as the RTA, let  you view multiple sources in a single VI graph, saving screen real estate and allowing additional graph operations to be implemented in real time.

With unlimited VIs in SoundCheck, there’s no limit to what you can do. Try it for yourself.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_48_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2023-01-12 11:42:192026-08-24 16:52:27SoundCheck Supports Unlimited Virtual Instruments (100 Things #48)

Using Panel Lock for Reliable Hardware Configurations (100 Things #47)

January 5, 2023/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

Buttons, knobs, and switches on interfaces are great for device flexibility, but not so great for reliability. Inadvertent adjustments can easily happen, causing inaccurate measurements and downtime for re-calibration. Listen’s interfaces feature a panel lock, a software controlled feature which prevents any physical buttons from changing an interface’s state. This is great for busy factory environments, where it would be easy to accidentally change a setting and render your measurements worthless.

Using Panel Lock To Ensure Test Integrity

Learn More About SoundCheck’s Advanced Features

Read more about SoundCheck’s advantages for production applications.

More information is also available in the  SoundCheck Manual.

 

Video Script: Using Panel Lock for Reliable Hardware Configurations

From its beginnings back in 1995, SoundCheck was designed to integrate with off-the-shelf sound cards and audio interfaces for data acquisition. Since 2009, we’ve also offered our own line of audio test hardware including audio interfaces, microphone power supplies, power amplifiers and more… all geared specifically for audio test and measurement.

There are many advantages of using Listen hardware with SoundCheck. It is true plug and play, making setup and calibration much faster and easier, and the tight integration enables full software control and the inclusion of features such as input gain autoranging.

One often overlooked feature is the front panel lock. When you’re using 3rd party hardware, there are usually many buttons on the front, which, if accidentally adjusted, can mess up your calibration and therefore your measurement accuracy. We’ve actually eliminated front panel controls from many of our interfaces, but for those that do still have knobs, such as AmpConnnct ISC and SoundConnect 2, you can lock the front panel via the software to prevent any unintended changes that could compromise your measurements.

When Panel lock is enabled, operators cannot inadvertently make changes to the hardware from the front panel, giving you confidence in your hardware settings and your measurements. This is particularly valuable in factory environments.

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_47_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2023-01-05 14:16:492026-08-26 15:36:51Using Panel Lock for Reliable Hardware Configurations (100 Things #47)

Discover SoundCheck Features with the Demo Viewer (100 Things #46)

December 15, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

The SoundCheck demo viewer is great way to understand the capabilities of the software without needing a full license. You can preview SoundCheck features, examine data already collected on the production line, and teach yourself how to use SoundCheck.

Teach Yourself SoundCheck with the Demo Version

Learn More About SoundCheck’s Advanced Features

Watch a more detailed video about how to get up and running with the Demo Viewer.

Learn more about SoundCheck.

Request the Demo Version.

 

Video Script: Discover SoundCheck Features with the Demo Viewer

Did you know you can review and analyze data in SoundCheck without a paid license?

Our demo-viewer application lets you preview all of SoundCheck’s features, including recalling, importing, saving, exporting and printing data. It also allows you to implement statistical analyses such as evaluating the mean curve from a bunch of frequency responses. You can also share measurements that you’ve made on the production line or in the lab with a colleague who doesn’t have an active SoundCheck license, or someone working from home without full access to their tools.

The demo viewer is also useful for exploring SoundCheck features prior to purchase, or teaching yourself SoundCheck skills without the financial outlay. You can establish temporary audio inputs and outputs within the Hardware Editor using your Laptop’s microphone array or a USB mic and a speaker or a headset and run the example sequences that  we provide. You can explore the various analysis options in SoundCheck, view sequences and you can even experiment with creating your own sequences. What you cannot do without a paid license, however, is make accurate measurements – all measurements are randomized by up to +/- 5 dB. You also cannot save sequences or steps. Nevertheless, you can teach yourself a lot about how to use SoundCheck using the demo viewer and our vast library of free online training resources.

If you already have SoundCheck installed on your machine, the SoundCheck DemoViewer executable is in your installation directory. SoundCheck will also open in DemoViewer mode if you open up the SoundCheck application without the license key connected. If you’d like a copy of SoundCheck to try out the demo viewer, please fill out the demo request form on our website and we’ll send you a download link!

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_46_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-12-15 14:25:552026-08-24 16:51:15Discover SoundCheck Features with the Demo Viewer (100 Things #46)

Measure and Characterize Noise with NoiseCheck (100 Things #45)

December 8, 2022/in 100 Things Videos, Blog, NoiseCheck Videos/by Zarina

SoundCheck measures all forms of audio, even noise. Listen’s noise measurement solution, NoiseCheck, captures measurement from microphones, accelerometers, and laser vibrometers and offers a full suite of analysis options. It is ideal for measuring devices including fans, motors, pumps, and other electromechanical products.

Measure and Characterize Noise with NoiseCheck

Learn More About Noise Measurement with NoiseCheck

Learn more about NoiseCheck.

Request the Demo Version.

 

Video Script: Measure and Characterize Noise with NoiseCheck

Most people are familiar with using SoundCheck to measure audio devices, but did you know that it can also be used to measure noise?

NoiseCheck is a cost-effective SoundCheck configuration for measuring noise and vibration of fans, blowers, motors, gears, bearings, pumps and other electromechanical products.

Using either a microphone, accelerometer or laser vibrometer input, it accurately quantifies both the level and frequency of the noise or vibration produced by a device. Simultaneous time and frequency domain analyses calculate both transient and steady-state noise parameters using the real time analyzer, spectrum analyzer and oscilloscope. Comparison to pass/fail limits makes it valuable for end of line tests. As with SoundCheck, test sequences can be configured for automated measurement, or virtual instruments can be used for quick, real-time measurements.

Because NoiseCheck uses the same advanced analysis algorithms and calibrated signal paths as SoundCheck, it offers the same fast, repeatable and reliable measurements and detailed failure mode analysis that you’re used to. Naturally, it’s similarly flexible for large scale use, integrating smoothly as part of an automated production line or an R&D lab with external control, statistical analysis and detailed reporting and writing to databases. Because NoiseCheck does not include stimulus functionality it is feature-limited compared to SoundCheck, and is therefore considerably less expensive.

NoiseCheck is a fast, easy and cost-effective solution for characterizing noise in your products. Contact your Listen sales engineer or rep for more information.

 

https://www.listeninc.com/wp/media/2023/11/100_things_45_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-12-08 14:41:002026-08-24 16:42:20Measure and Characterize Noise with NoiseCheck (100 Things #45)

Using Equalization Curves For Calibrated Measurements (100 Things #44)

December 1, 2022/in 100 Things Videos, Blog, Measurement Techniques Videos, SoundCheck Functionality Videos/by Zarina

Equalization curves are essential for creating flat frequency responses from speakers, allowing for them to be used as reliable references for testing devices like microphones. SoundCheck has functionality integrated directly into the calibration editor. From a single window, SoundCheck can measure and apply an equalization curve to your device, for use in any testing application.

Using Equalization Curves For Calibrated Measurements

Learn More About Equalizing Curves in SoundCheck

View more detailed tutorials on how to use this functionality. (In the Calibration section)

Read our knowledgebase article on how to apply equalization to an artificial mouth for a flat response.

 

Video Script: Using Equalization Curves For Calibrated Measurements

Did you know you can easily create an equalization curve for a speaker in SoundCheck? This works with loudspeakers, speakers in smart devices, headphones, telecommunication devices, and anything else you might want to equalize .

An equalization curve is used to modify the stimulus waveform before it is played out of a source speaker or mouth simulator. By compensating for a speaker’s non-linear magnitude and phase response on a per-frequency basis, a near flat frequency response from the speaker can be achieved. This allows the speaker to be used as a reliable reference across a specified frequency range in a test sequence most often used in the testing of microphones. In SoundCheck, this adjustment is made to the stimulus waveform before it is played during the acquisition step.

Creating an equalization curve for your device is simple with SoundCheck. In the output tab of the calibration editor, there is a set of sequences available. The Speaker Equalization sequence will provide a simple step by step process to create an EQ curve in seconds. Select the signal path you will be using in your test, then your Output Calibrated Device to have the EQ curve linked with. Once this sequence is complete, the EQ curve is stored in the selected Output Calibrated Device file.

Alternatively, if you already have an EQ curve, you can import and use this curve through the memory list. In the output tab of the calibration editor, select the option Copy From Memory List. The Import Calibration Data dialog box will allow you pick the source curve, the desired Output Calibrated Device, and will give the option to invert the curve if needed, right in the editor.

How do you use an EQ curve in SoundCheck? Simply put, anywhere you need! The stimulus editor features an EQ checkbox, which when enabled, will apply the equalization curve before the signal is output from the speaker during the Acquisition step. Since the EQ curve is tied to the Output Calibrated Device selected with the Signal Path, SoundCheck will automatically use the correct curve. Alternatively the EQ curve can be applied in the Signal Generator to equalize all of the available signal types, even when using a signal generator in a virtual instrument acquisition step.

SoundCheck is focused on giving audio test engineers every tool they may need, so no matter what device you are working with, we provide the right tools for the job.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_44_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-12-01 14:50:382026-08-21 15:07:09Using Equalization Curves For Calibrated Measurements (100 Things #44)

Perform Analysis Outside of a Sequence with Offline Capabilities (100 Things #43)

November 17, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

SoundCheck’s industry-leading audio measurement tools go far beyond the test sequence. All its analysis and post-processing algorithms can be used outside of a sequence, which is perfect for  further analyzing previously measured data, data from a colleague, or data from another test lab across the globe.

Offline Analysis with SoundCheck

Learn More Offline Analysis in SoundCheck

See our knowledgebase article on viewing data offline.

Watch a short video on batch processing of offline data.

 

Video Script: Perform Analysis Outside of a Sequence with Offline Capabilities

Do you ever wish you could do a quick analysis or further processing on data you’ve already captured and saved? Offline capabilities in SoundCheck lets you do just this. You can apply all the operations that you might use in a sequence as stand-alone steps without having to use or write a test sequence. This time-saving feature lets you get more out of your data or even run SoundCheck’s advanced algorithms on data collected by other test systems.

This is particularly useful for one time analysis or processing of data. Let’s say you have two frequency response curves saved from testing a set of loudspeakers in the Memory List and you want to calculate the average of the two curves. Instead of creating a sequence to do this, you can click on the Offline Menu > Post processing and pick the processing step of your choice – in this case Average Curve.

Another example might be making a quick change to Listen hardware configuration using message steps, such as switching the microphone bias on inputs. You can even do quick offline statistical analysis.

In fact, any step that you can execute in a sequence can be run offline, making offline analysis an extremely powerful tool. This includes limits, post processing, displays, statistical analysis  and more.

This complements the comprehensive test sequence capability that Soundcheck offers and its virtual instruments for quick on-the-fly calculation of simple audio parameters. Check out our online knowledgebase and SoundCheck manual for additional information and examples.

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_43_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-11-17 15:03:382026-08-26 15:37:27Perform Analysis Outside of a Sequence with Offline Capabilities (100 Things #43)

Measuring Max SPL of a Vehicle Infotainment System (100 Things #42)

November 10, 2022/in 100 Things Videos, Automotive Videos, Blog/by Zarina

SoundCheck is ideal for making in-car measurements such as Max SPL, frequency response and distortion. In fact, SoundCheck is the only full-featured audio test system that offers true nth octave real-time multichannel analysis of 6 microphones simultaneously, that we need for some in-car measurements.  In this short video we demonstrate how we can make Max SPL measurements using a 6 microphone array with SoundCheck and an AmpConnect 621 audio interface. You could make these measurements as part of an end-of-line QC test, in the R&D lab, or to compare various car infotainment systems.

In-Car Max SPL Measurement

Learn More About Automotive Measurements

Watch our Automotive Measurement Seminar in which we make in-car measurements of Max SPL, Frequency response and Buzz, Squeak & Rattle.

Read a short article about the work that the AES Technical Committee on Automotive Audio is doing on Max SPL measurements.

A free pre-written SoundCheck test sequence is available to measure both the Max SPL Spectrum and a single, power averaged value for Max SPL in line with the AES TC-AA working group’s proposed guidelines.

A comprehensive resource on in-car Max SPL measurements is the Audio Engineering Society Technical Committee on Automotive Audio (TC-AA). Their in-vehicle measurements white paper (draft) aims to define repeatable and defined car audio system measurements and in addition to the measurement methods, contains information on standardized test configuration, for example microphone and seat positioning.

Main webpage on SoundCheck for Automotive Measurements.

 

Video Script: Measuring Max SPL of a Vehicle Infotainment System

Did you know SoundCheck can make in-car measurements such as Max SPL, frequency response and distortion? In fact, SoundCheck is the only full-featured audio test system that offers true nth octave real-time multichannel analysis of 6 microphones simultaneously, that we need for some in-car measurements.  In this short video I’m going to demonstrate how we can make Max SPL measurements using a 6 microphone array with SoundCheck and an AmpConnect 621 audio interface. You could make these measurements as part of an end-of-line QC test, in the R&D lab, or to compare various car infotainment systems.

In this test, we use a 6 microphone array to represent the driver’s head. We mount it on a tripod so that it’s easily adjusted to the position where the head would be.

This is placed in the driver’s seat of the car, with the tripod legs as far back on the seat as they’ll go, right against the backrest. The height and angle of the seat are set to the minimum or lowest position. The AES is working on a proposed standard for this type of measurement that defines some very specific dimensions between the pedal and backrest, the height of the stand, and the inclination of the back rest. For this demo, I’m not going to be that precise, but as you can see, I am making sure that I have recorded the dimensions I am using, and the mic array is in a fairly typical driver head position.

Now let’s measure Max SPL. We’ll use broadband monophonic pink noise and we’re going to crank the volume to the max   – even outside of the car this is going to be loud!

It’s hitting 110 dB and we’re going to play it for 30 seconds and take the linear average or Leq. Here you can see the readings on the six microphones, and the black line representing the spatial power average. The test sequence is calculating the overall Max SPL as 111 dB C weighted, and also displays the Max SPL spectrum from 20Hz to 20 kHz.

If you’d like to learn more about in-car measurements, check out our automotive measurement seminar, in which we also demonstrate frequency response and distortion measurements. You can find this in the audio measurements playlist on our Youtube channel! This test sequence that I just used for measuring Max SPL is also available for download, free of charge, from our website.

 

https://www.listeninc.com/wp/media/2023/11/100_things_42_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-11-10 17:10:492026-08-24 16:49:47Measuring Max SPL of a Vehicle Infotainment System (100 Things #42)

Easily Measure Headphones to EN 50332 with a Pre-written Sequence (100 Things #41)

November 3, 2022/in 100 Things Videos, Blog, Headphone & Headset Videos/by Devin Vaillancourt

We provide many pre-written sequences for testing to standards across many applications, including a suite of sequences testing to the EN 50332 Standard. This test suite consists of two parts to accurately measure the device and included headphones, together and separately. All of the sequence development work has been done, saving your hours of sequence writing. These sequences also include operator instructions, making headphone adjustments on a head and torso simulator easy. You can test in confidence knowing this sequence suite includes everything you need to get up and running fast.

Easily Measure Headphones to EN 50332 with a Pre-written Sequence

Try EN 50332 for yourself

We offer two sequences testing to the EN 50332 standard: EN 50332-1 and EN 50332-2. These sequences are pre-written and ready to run.

Video Script:

Did you know we offer a test sequence for measuring headphones headphones and earphones associated with portable audio equipment to the European standard, EN50332?

This standard specifies the maximum sound pressure level and input / output voltage measurements for portable audio playback devices. These characteristics are usually evaluated at the design and engineering stage as compliance is mandatory in many countries.

Our off-the-shelf test sequence saves hours of development time, and ensures that measurements  are correctly made.

The standard consists of two parts.

Part 1 measures the portable music players together with the headphones they are bundled with. In this measurement, we load an IEC 268 weighted pink noise stimulus file onto the portable device and play it through the earphones at maximum volume. 

The earphones are positioned on a head and torso simulator, or HATS. We record the signal from each ear, and a 1/3rd octave curve is analyzed. A-weighting and free field correction for the HATS are applied, the values between 20 Hz and 20 kHz summed, and the A-weighted equivalent sound pressure level is calculated.

The sequence runs 5 times, with the headphones repositioned between each measurement to average out any variability in the fit and sealing of the device under test. We average these measurements to calculate the final LA eq values.

In part 2, the portable device and the headphones are measured separately. 

To test the music player, we load a weighted pink noise stimulus file onto the portable device and play it through the headphone jack connected to a 32 ohm load at maximum volume. The RMS voltage is averaged over 30 seconds, and the result must be less than 150 mV.

The headphone test is a little more complex. We connect the headphones to an amplifier with less than 2 ohms output impedance. The amplifier’s outputs are split, connecting one side to the headphone and the other directly to the audio interface. This lets us measure the voltage at the headphone while the amplifier is under load. You can see here we are using the AmpConnect 621 audio interface as we need at least 4 inputs – 2 are connected to the amplifier outputs and the other two to the HATS ears via the microphone preamps.

First the electrical loopback from the amplifier is used to measure the amp’s gain using the IEC weighted pink noise file, and this is used as calibration data for the subsequent measurements.

We then put headphones on the HATS and play noise while monitoring the signal through the ears on the multimeters to position the headphones for maximum output.

Next, we play IEC weighted pink noise at 50 mV while the signal from each ear is recorded, and a 1/3rd octave curve is analyzed. As before, A-weighting and free field corrections are applied and the values summed from 20 Hz to 20 kHz to indicate the overall weighted sound pressure level. 

Finally, the ratio between stimulus level and sound pressure level is used to calculate the stimulus level required to produce 94 dBSPL at the ears. This value, the wide band characteristic voltage or WBCV, must be greater than 75mV to comply with the standard.

So that’s how easy it is. You could of course program this from scratch yourself in SoundCheck, but the pre-written sequence will save you hours!

https://www.listeninc.com/wp/media/2023/10/100-things-thumbnail-41.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2022-11-03 08:30:142026-08-21 13:38:13Easily Measure Headphones to EN 50332 with a Pre-written Sequence (100 Things #41)
Page 6 of 11«‹45678›»

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top