Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

Bluetooth Headset Testing

September 8, 2017/in Free, Headphone & Headset Sequences, Wireless (Bluetooth) Sequences/by Zarina
Screenshot of final SoundCheck display of Bluetooth Headset Testing Sequence

Final display of Bluetooth Headset Testing Sequence

This Bluetooth Headset testing sequence for SoundCheck measures the send and receive performance of a stereo Bluetooth headset with a built-in microphone using a mixture of analog and digital channels. The left and right earphones are measured simultaneously with a stepped sweep from 20kHz to 20 Hz using two Bluetooth profiles: A2DP and HFP. The mic is measured with a stepped sweep from 8kHz to 100Hz using the HFP profile.

A short 1kHz tone is pre-pended to the test stimulus which serves as a reference tone for resampling and frequency shift operations. Post-processing resampling and frequency shift precisely synchronizes the stimulus and response waveforms prior to analysis. In this case, the HarmonicTrak algorithm is used for frequency and THD analysis. A2DP frequency response and THD curves are displayed on the first display, followed by A2DP & HFP curves superimposed on a subsequent display. Lastly, the Bluetooth headset’s microphone is tested with HFP and its frequency response is shown on the final display along with the previously collected data.

More

https://www.listeninc.com/wp/media/2017/09/Bluetooth_Headset_final_display.png 1289 1869 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2017-09-08 14:37:232025-11-14 12:56:05Bluetooth Headset Testing

Lightning Headphone Test (Open Loop Headphone Test)

May 23, 2017/in Free, Headphone & Headset Sequences/by Zarina

open_loop_headphone_screenshotThis sequence tests a stereo headphone connected to a portable audio device such as a mobile phone or MP3 player. This open loop headphone test is particularly useful for testing headphones with proprietary connectors such as the Lightning connector which otherwise can’t be tested in a conventional “closed loop” test configuration.

The test stimulus is created in SoundCheck, saved as a WAV file and loaded on to the portable device for playback. Both left and right earphones are measured simultaneously using a continuous log sweep from 20 Hz to 20 kHz. The sequence uses a short 1 kHz tone, pre-pended to the normal test stimulus to automatically trigger the test when playback of the test signal begins; it also serves as reference tone for any frequency shift calculations. Post-processing precisely synchronizes the stimulus and response waveforms, and then calculation of the measurement parameters proceeds as with any conventional headphone. In this case, analysis is performed using the Time Selective Response (TSR) algorithm which performs THD and fundamental frequency response analysis simultaneously in addition to producing an impulse response. The fundamentals are then post processed to derive the sensitivity of the left and right channels at 1 kHz.

More

https://www.listeninc.com/wp/media/open_loop_headphone_screenshot.jpg 793 1047 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2017-05-23 16:02:342025-11-14 12:56:14Lightning Headphone Test (Open Loop Headphone Test)

Headphone Testing with SoundCheck ONE

March 9, 2017/in Free, Headphone & Headset Sequences/by Zarina

This SoundCheck ONE template sequence contains all the essential steps for basic headphone measurements using SoundCheck ONE and AudioConnectTM. The sequence can be easily customized and saved for specific products by turning individual measurements on and off, and by adjusting settings within each sequence step such as stimulus range and level, tolerance limits, graphical displays, and data saving.
Please note that sequences in SoundCheck ONE cannot have steps added/removed or the layout modified – the full version of SoundCheck is required for this capability.

More

https://www.listeninc.com/wp/media/seq_SC-ONE_headphones_final_result.jpg 458 600 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2017-03-09 19:32:002025-11-14 12:56:22Headphone Testing with SoundCheck ONE

Open Loop Microphone Test

December 9, 2016/in Free, Microphone Sequences, Smart Device Sequences/by Zarina

Open loop microphone test

This sequence demonstrates the two most common microphone measurements, frequency response and sensitivity, on a microphone embedded in a recording device. Typically, when measuring a microphone, the response of the device can be captured simultaneously with the stimulus. However, with devices such as voice recorders and wireless telephones, forming a closed loop can be cumbersome or impossible. This sequence demonstrates how to perform an open loop microphone test by recording the signal on the device under test, transferring that recording to the computer running SoundCheck, and then using a Recall step to import the recorded waveform and analyze it.

This specific sequence, v4, is an improvement on the prior versions. The v1 release required that the audio file containing the recorded response waveform be manually windowed outside of SoundCheck before being analyzed. The v2 release utilized a new feature in SoundCheck 14, using values from the memory list to semi-automatically trim the waveform before analysis. The v3 release completely automated waveform editing through the use of an intersection level and windowing post processing steps. Currently the v4 release uses the new Auto Delay+ algorithm, exclusive to SC18 and beyond. Auto Delay+ is capable of detecting and accounting for delays of -0.5 seconds to any positive delay, nullifying the need for windowing steps in the sequence. If you are interested in learning more about this algorithm please refer to the Analysis section of the SoundCheck manual.

More

https://www.listeninc.com/wp/media/open_loop_microphone_final_display_v4.jpg 536 800 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2016-12-09 16:48:172025-11-14 13:18:04Open Loop Microphone Test

Comparison of Wired and Wireless (Bluetooth) Speaker Response

September 27, 2016/in Free, Loudspeaker Sequences, Wireless (Bluetooth) Sequences/by Zarina

This test sequence performs frequency response and distortion measurements of a Bluetooth speaker using both a wireless Bluetooth and wired stimuli; then compares the results. This sequence is configured for use with a Portland Tool & Die BTC-4149/4148 or BQC-4149/4148 Bluetooth interface.

Initially, the sequence prompts the operator to turn on the Bluetooth device under test and set it to pairing mode. BTC message steps will connect the Bluetooth device (operator selects the device from a list of detected Bluetooth devices) and connects Bluetooth audio. A 1 kHz test tone is transmitted, and if detected, the test sequence proceeds. A stepped sine sweep from 20 kHz to 100 Hz is played wirelessly to the Bluetooth speaker and measured via a calibrated reference mic.

Two post-processing steps convert the sampling rate and alignment of the response, then an analysis step calculates the frequency response and THD. The Bluetooth is disconnected, and the Bluetooth frequency response and THD curves are displayed on graphs. The operator is then prompted to connect the wired analog input into the Bluetooth speaker, and the same measurements are performed using the analog connection. Analog frequency response and THD curves are temporarily displayed on graphs, followed by graphs containing both Bluetooth and analog curves for comparison.

More

https://www.listeninc.com/wp/media/2016/09/BT-vs-wired-main-display.png 892 1188 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2016-09-27 18:13:472025-11-14 13:05:10Comparison of Wired and Wireless (Bluetooth) Speaker Response

Linear Motor Test Sequence

June 6, 2016/in Free, Linear Motor Test Sequences/by Zarina

Linear motors (also known as linear vibrators or linear resonant actuators) have become increasingly popular in handheld devices such as phones and tablets for providing haptic feedback to the device’s user. The typical linear motor design uses a fixed voice coil in conjunction with a moving magnetic mass. A spring is placed between the mass and the motor’s housing to provide compliance to the moving system.

The design goal of linear motor is to create a “High-Q” system so that the device has a very strong resonant frequency across a narrow frequency bandwidth. The motor is then operated at its resonant frequency to produce maximum output (vibration) while having minimal power demands on the portable device. The strength of the vibration is controlled by adjusting the magnitude of the AC signal input to the motor.

More

https://www.listeninc.com/wp/media/2016/06/linear_motor_test_final_display.png 1066 1264 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2016-06-06 19:39:032025-11-14 12:59:48Linear Motor Test Sequence

IEC-60268-7 Headphone Sequences

December 15, 2015/in Free, Headphone & Headset Sequences/by Zarina

IEC-60268-7: Sound System Equipment – Part 7: Headphones and Earphones is an international standard intended to characterize the performance of headphones and earphones. The standard itself is a lengthy document, 9 Sections and 3 Annexes covering 46 printed pages. These SoundCheck sequences focus on the electro-acoustic tests which are detailed in Section 8 “Characteristics to be specified and their method of measurement”.

Five separate sequences are provided, each designed to measure specific characteristics. This approach provides the user with the flexibility to measure all or some of the characteristics of their headphone.

More

https://www.listeninc.com/wp/media/2015/12/IEC-60268_final_display.png 720 1110 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2015-12-15 15:53:122025-11-14 12:56:47IEC-60268-7 Headphone Sequences

Triggered Record Using WAV File (Version 16.0 and earlier)

May 5, 2015/in Audio Electronic Sequences, Free, Loudspeaker Sequences/by Zarina

triggered_record_screenshotThis sequence allows you to test devices without an analog input such as tablets, cellphones and MP3 players. A stimulus WAV file is created in SoundCheck, and copied to the device under test, where it is played and the response recorded in SoundCheck as if the stimulus were played directly from SoundCheck. The stimulus WAV file to be used on the device under test (DUT) may be customized in the stimulus step.

Note that this sequence uses the level-based trigger available in SoundCheck 16.0 and earlier. If you are using version 16.1 or later, please see the frequency-trigger based sequence which takes advantage of new functionality to offer more robust triggering.

More

https://www.listeninc.com/wp/media/triggered_record_screenshot.jpg 209 360 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2015-05-05 18:37:112025-11-14 13:05:15Triggered Record Using WAV File (Version 16.0 and earlier)

Measuring Digital MEMS Microphones: Frequency, Sensitivity and Power Supply Rejection (PSR) Performance

May 1, 2015/in Free, Microphone Sequences/by Zarina

seq_dig_mic_final_display_substitution_methodThis test suite contains 3 sequences to enable comprehensive testing of digital MEMS microphones.

The first measures the frequency and sensitivity and displays two graphs: absolute level in dBFS, and the same response curve but normalized to 0 dB at 1 kHz.

The second sequence uses the substitution method to test a digital MEMS microphone frequency response with a source speaker that is not or cannot be equalized. The MEMS microphone is simultaneously measuring with a reference microphone , and by subtracting the response of the reference microphone from the DUT microphone the response and sensitivity of the device under test is revealed.

Measuring Digital Microphone PSR (Power Supply Rejection)
The third sequence demonstrates a method for measuring a digital MEMS microphone’s power supply rejection performance (PSR). This sequence measures PSR at 217 Hz (the 217 Hz GSM TDM pulse often of concern) but is easy to modify to test at any frequency. A DC supply with a calibrated AC signal, simulating electrical interference is applied to the MEMS microphone. SoundCheck then records the audio from the DUT, analyzes it with a spectrum analyzer and extracts the RMS energy at the specific frequency of the simulated electrical interference and returns the PSR value. The setting of frequency, waveform type and amplitude of the simulated electrical interference is controlled entirely from within SoundCheck.

More

 

https://www.listeninc.com/wp/media/seq_dig_mic_final_display_substitution_method.jpg 317 432 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2015-05-01 18:29:282025-11-14 13:14:55Measuring Digital MEMS Microphones: Frequency, Sensitivity and Power Supply Rejection (PSR) Performance

Microphone Polar Plot Sequence

May 1, 2015/in Free, Microphone Sequences/by Zarina

mic_polar_plot_screenshotThis sequence measures the directional response of a microphone and graphs the result as a polar plot. A log sweep stimulus is played from 100 Hz to 10 kHz at each angular increment, and the acquired waveform is analyzed using the Time Selective Response algorithm. This method allows the test to be performed in a non-anechoic environment by placing a window around the direct signal, eliminating the influence of reflections. Commands are sent automatically to the LT360 turntable via an RS-232 connection, instructing it to move in 10 degree increments after each measurement. The sequence measures the response every 10 degrees from 0 to 180 and mirrors the polar image, simulating a full 360 degree test while saving time. The response at each angular increment is compared against the on-axis response to create a normalized curve. This removes the influence of the device’s frequency response and sensitivity, such that the polar plot only shows the directional response. The final display also contains a graph of the directivity index in decibels versus frequency.

More

https://www.listeninc.com/wp/media/mic_polar_plot_screenshot.jpg 324 432 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2015-05-01 15:38:492025-11-14 13:15:00Microphone Polar Plot Sequence
Page 6 of 7«‹4567›

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top