Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

Practical Automotive Measurements Seminar

August 6, 2026/in Automotive Videos, Blog/by Renee Lucas

Last week, industry expert and Listen President Steve Temme presented the latest recommendations for automotive audio measurement and the evolving methods used to evaluate modern in-car infotainment systems at Harman’s North American Headquarters in Novi, Michigan. Recorded ahead of the AES Automotive Conference, the presentation discusses the work of the AES Technical Committee on Automotive Audio (TC-AA) and the industry’s efforts to standardize automotive acoustic measurements.

This session provides a rare opportunity to gain valuable knowledge in the rapidly evolving in-car audio and infotainment industry. Whether you’re developing OEM infotainment systems, benchmarking competitor vehicles, performing automotive acoustic research, or implementing standardized measurement procedures, you’ll gain practical insights into the current state of automotive audio testing.

Steve unpacks the latest work from the TC-AA, highlighting new standardized testing models for frequency response, Max SPL, and impulsive distortion. He also showcases advanced characterization techniques, such as seat-to-seat spectral uniformity and psychoacoustic distortion methods.

Watch the video here:

https://www.listeninc.com/wp/media/2026/08/Presents-2-1-e1786040436557.png 650 1514 Renee Lucas https://www.listeninc.com/wp/media/logo.png Renee Lucas2026-08-06 13:41:432026-08-28 09:00:54Practical Automotive Measurements Seminar

Car Audio Measurement – Part Two

July 29, 2025/in Audio Measurement Videos, Automotive Videos, Blog automotive audio, automotive audio demo, automotive audio measurement, automotive audio test, car audio, car audio demo, car audio measurement, car audio measurements, car audio test, car measurement, how to measure automotive audio, how to measure automotive audio part two, how to measure car audio, how to measure car audio - part two, listen demo, listen inc demo, listen inc measurements, soundcheck demo/by Julius Wijono

In this second part of our car audio measurement demo, we’ll be covering how to measure maximum SPL at the onset of audible distortion and detect impulsive distortion using advanced SoundCheck sequences. You’ll see how to identify buzz, squeak, and rattle with perceptual Rub & Buzz, transient distortion, and crest factor analysis.

Watch this Video Demo of Car Audio Measurement Techniques

Learn More about How to Perform Car Audio Measurements

Here are some additional resources:

  • Standardized Automotive Audio Testing Seminar: https://www.listeninc.com/standardized-automotive-audio-testing-seminar/
  • Automotive Audio Measurements Seminar (Frequency Response, Max SPL, Buzz, Squeak & Rattle): https://www.listeninc.com/automotive-audio-testing-seminar-2/
  • Standardized Automotive Audio Measurements (presented at ISEAT conference): https://www.listeninc.com/standardized-automotive-audio-measurements/

Video Transcript: How to Measure Car Audio – Part Two

Today, I’m going to continue on from our last automotive video where we measured frequency response, spectral uniformity, THD and IM distortion. This time we’ll  demonstrate Max SPL at the onset of audible distortion  and impulsive distortion. Let’s make some measurements.

Again, I’m using the test configuration recommended in the AES TC-AA white paper on automotive measurements. We’re using a precisely positioned 6-mic array in the driver’s seat to represent our listener. This is connected to  an AmpConnect 621 Audio Interface. Our laptop is also connected to a measurement-grade Bluetooth interface  which we’re using to send the stimulus signal into our car’s head unit. If you want to know more about the test configuration, you can download the AES white paper, and we also have full details on our website. The inputs and outputs of the test system are already calibrated, as is the  audio interface, so we’re ready to measure.

Maximum SPL is one of the measurements outlined in the TC-AA proposal, and it’s important because it lets you compare maximum sound levels of infotainment systems. It’s defined as the maximum sound pressure level that the infotainment system can reproduce, and it combines all the components of the system – the speakers, amplifiers, power supply and so on.

The simplest way of evaluating this is to measure the overall Max SPL and Max SPL spectrum regardless of distortion. In these tests we set the car’s volume control to maximum and measure overall Max SPL and SPL Spectrum simultaneously using a 30 second broadband 20 to 20 KHz monophonic pink noise stimulus at minus 12db FS . This is quite a basic measurement and I’ve demonstrated it in other videos, so we’ll just briefly discuss the results here, then I’ll demo a more advanced measurement. 

Here we see the individual microphone measurements and the average, the black line. The overall level of 103dBC, regardless of distortion, isn’t too loud but maybe it might be limited by design to prevent severe distortion at low frequencies from clipping the amplifier. 

What I’ll show you now is a Maximum SPL measurement at the onset of audible distortion. More volume is only good as long as the output sounds clean, so it makes sense to define the Maximum SPL based on when the sound quality starts to degrade.

This is a more complex test sequence and takes longer to run because you need to repeatedly play the stimulus until you reach distortion across a range of frequencies – similar to how we measure Max SPL in other applications. The good news is that this process can be highly automated in SoundCheck.

Our test sequence plays the stimulus multiple times for each test frequency, increasing the level in 3dB steps until the THD exceeds a predefined level in percent. It then reduces the level by 3dB and increases it in smaller increments of 0.5 dB to more precisely find the THD threshold. The Max SPL is recorded at that frequency and the test sequence continues to the next frequency. The entire process is completely automated via the test sequence, making this measurement fast with minimal intervention.

This sequence actually takes about 20 minutes to run in total, so I’ve edited this recording to skip the repetitive bits. We’ll set our range from 50 Hz up to 500 Hz, and we’ll set the percentage distortion. I’m going to set that at 3%. That means that once the distortion level goes above 3% it will record it and move onto the next frequency.

We’ll start at minus 12dB. The first thing it does is an auto range and it measures the time delay in the system… Now it’s playing 50 Hertz…It’s auto ranging. In a moment, it’s going to show the first result.

All right, here we go.

So, we can see the 50 Hertz sine wave of the 6 microphones capturing it, and we can see that we’re around 3.4% distortion.

So now it’s going to lower by 3 dB.

And it’s going to start going up again.

So now we’re 114 dB at 2.4%.

Now it’s going in half DB steps to very precisely find the sound pressure level at exactly 3%.

I’m just going to skip quickly through the next few measurements until we start graphing results

OK. We got 50, 63, and 80 Hz. You can see on the bottom graph is the input level and on the top graph we have the maximum sound pressure level versus frequency, the blue curve, and the orange curve is the THD level for that sound pressure level.

Again, I’ll fast-forward through the rest until we get our end result – it’s just more of the same at a bunch of different frequencies

OK, here’s our final result. The top graph shows the Maximum SPL and corresponding THD, and the lower graph shows the maximum stimulus level plotted when the THD reaches 3% with the head units’ volume control set to max.

At some frequencies, especially higher frequencies, for example 400 Hz and 500 Hz, the maximum input level is reached before the system distortion reaches 3% THD. The stimulus level is typically limited by the lower frequencies where there is more distortion.

So that’s it for system performance measurements. Now let’s look at system integrity.

Impulsive Distortion is a useful system integrity metric. It detects any audible buzz, squeak and rattle that may be caused by the speakers vibrating the door panels, loose wire harnesses, etc. These noises degrade the listener experience so it’s important to assess the vehicle thoroughly. It’s actually a good idea to make these measurements before you make the system characterization measurements, as this ensures that the infotainment system is properly installed in the vehicle under test

You can also use this test as an end-of-line check to verify vehicle integrity.

There are several methods of measuring impulsive distortion. The AES White Paper suggests a crest factor measurement with a logarithmic sine sweep and a tracking high pass filter, to evaluate impulsive distortion at 80 and 90 dBA. Sine waves have a crest factor of 3dB, and transients, such as rattling wires, loose fasteners, and noise, for example background noise, typically have a crest factor greater than 8dB. Generally speaking, crest factors over 3 dB, may indicate buzz, squeak or rattle. However, you have to be a bit careful as background noise, especially in a noisy factory, can result in similar Crest Factor results. You have to be very careful to minimize background noise and make sure that the results correlate with what you can hear.

I prefer to use perceptual Rub & Buzz and Transient distortion versus time instead, as they are less sensitive to background noise, and only highlight distortion sounds that are audible to humans. Perceptual Rub & Buzz uses masking curves to simulate the performance of the human ear to measure only audible distortion.  Transient distortion versus time measurement tracks individual events in the time domain to reveal any loose particles or rattling wires. It offers greater precision than frequency domain measurements since it tracks individual transient events.

I’ll measure both these parameters simultaneously, using a stepped sine sweep stimulus.

There’s a couple of frequencies there where I could hear some buzzing or rattling sound, I’m not sure if you could hear it. Let’s see if we pick that up in the measurement.

OK,  so here’s our recorded time waveform of all 6 mics.

And here… we can see the perceptual rub and buzz and indeed there’s a little bit of a peak going on at around 224 Hz and probably at a higher frequency here to around 340 Hz. These are the little buzzing sounds that we heard during the sweep.

Now, if we go to the bottom waveform graph, we can actually see if there’s any transients. Those are typically caused by things rattling around.

We don’t have much here – at low frequencies we don’t have a lot of output, so I suspect this is just background noise. So this car isn’t bad – just a little bit of Rub & Buzz and no transient artifacts.

I actually tried cranking the SPL up to 90dB to try to get some distortion at higher volumes, and here’s what I got…

Let’s just take a listen to the recorded response…. At this volume you can hear the distortion a lot more clearly.

Here we have the results of crest factor, Perceptual Rub & buzz and transient distortion.

The distortion is so obvious at this volume that it even shows up on the Crest Factor response – you can see the Crest Factor is above 8dB between 200 – 300 Hz.

It’s also much more obvious on the PRB curve – you can see a peak in the same point showing it correlates well. This is a little more sensitive than crest factor though –  we can also see a smaller, sharper bump at 600 Hz which is not perceptible using crest factor measurement, even though I could hear it during the sweep. This measurement technique is also considerably more reliable in a noisy environment.

This 3rd graph shows the time transients of the impulsive distortion measurement. You can see the constant background noise as a steady noise floor and impulsive distortion is highlighted as well-defined transient spikes. You can see transient spikes from 2 of the microphones around 11-12 seconds into the sweep. These are closer to the driver side door where a door panel is rattling at low frequencies, around 200-300 Hz, in the sine sweep. A neat trick with this measurement method is that you can actually listen to the recording without the fundamental, let me just play that back now… and that really highlights the audible distortion.

So that pretty much concludes our suite of measurements. There are of course many variations of these measurements as well as other things you could measure with the same physical hardware setup, but that’s all we have time for today. There are some more in-depth automotive audio testing videos on our website and YouTube channel, so if you want to learn more, check them out.

https://www.listeninc.com/wp/media/2025/07/Car-Audio-Demo-Part-Two-TN-scaled.png 1440 2560 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-07-29 07:00:262026-08-28 14:26:17Car Audio Measurement – Part Two

Car Audio Measurement – Part One

June 16, 2025/in Audio Measurement Videos, Automotive Videos, Blog/by Julius Wijono

How do you measure car audio? In this video, we demonstrate a complete car audio measurement setup using SoundCheck, based on the AES TC-AA recommended configuration. You’ll see how to test automotive infotainment systems inside a real vehicle using a calibrated 6-microphone array in the driver’s seat to capture spatially averaged data. We walk through measurements for frequency response (using both correlated and uncorrelated pink noise), seat-to-seat spectral uniformity, total harmonic distortion (THD), and intermodulation distortion.

Watch this Video Demo of Car Audio Measurement Techniques

Learn More about How to Perform Car Audio Measurements

Here are some additional resources:

  • Standardized Automotive Audio Testing Seminar: https://www.listeninc.com/standardized-automotive-audio-testing-seminar/
  • Automotive Audio Measurements Seminar (Frequency Response, Max SPL, Buzz, Squeak & Rattle): https://www.listeninc.com/automotive-audio-testing-seminar-2/
  • Standardized Automotive Audio Measurements (presented at ISEAT conference): https://www.listeninc.com/standardized-automotive-audio-measurements/

Video Transcript: How to Measure Car Audio – Part One

Today I’m going to demonstrate in-car audio measurements, specifically frequency response, spectral uniformity and THD, using the test configuration recommended in the AES TC-AA white paper on automotive measurements.  

We’re using a precisely positioned 6-mic array in the driver’s seat to represent our listener. This is connected to  an AmpConnect 621 Audio Interface. Our laptop is also connected to a measurement-grade Bluetooth interface  which we’re using to send the stimulus signal into our car’s head unit. If you want to know more about the test configuration, you can download the AES white paper, and we also have full details on our website.

I’ve already calibrated the inputs and outputs of the test system by measuring the sensitivity of each individual microphone in the array and storing these readings in the software calibration menu. I also calibrated the audio interface to ensure proper response frequencies and levels, both in the analog and digital domains, so we’re ready to measure.

First we’ll measure frequency response using 80 dBA monophonic, correlated, pink noise on both channels. I’ve already calibrated the level, and we’ll play a short burst. Ideally the stimulus should be longer but I’ll still get a pretty accurate result. Let’s start the sequence. Enter the information it’s asking. OK, the overall level is 79.5 dB, quite close to 80, with a delay of 1.45 seconds which SoundCheck has measured and compensated for. What I’ve actually done here is a 1/3 octave analysis of each individual microphone, from 1 through 6, and you can see the difference due to location, reflections, and standing waves in the car. The black curve is the overall power average or spatial average of all six mics and represents what a human would hear.

Now let’s  measure the frequency response using uncorrelated pink noise. This randomizes the noise between the two channels rather than playing identical signals out of both. We expect to see some low frequency cancellation due to phase differences.

So let’s run the sequence… and we’ve got our results.

We can compare the results with uncorrelated noise to the results when I used correlated pink noise. Let’s bring them both onto the graph… The orange line is the correlated spatial average and the black line is the uncorrelated spatial average. We can see the uncorrelated pink noise has  about 3db less output than the correlated pink noise below 100 Hz and very little above 1KHz.

We can also look at the seat to seat spectral uniformity. Ideally each passenger in the car experiences the same high quality sound, but it’s hard to independently equalize the loudspeaker playback system for each seat in the car. Typically the driver’s seat is favored, the frequency response in the other seats is not quite as smooth.

I’m not going to do this now as it takes a while, but I’ll show you some measurements I made earlier. I repeated the first frequency response measurement with correlated pink noise in each of the car’s four seats and here you can see that the base performance in the rear passenger seats, the orange and green lines are not as extended or smooth as the front passenger seats.

To calculate the seat to seat spectral uniformity, We compare the individual seat response to the maximum and minimum responses to find the seat with the biggest difference. In this example both the left and right rear passenger seats have over 10 dB difference from the front seats at some

Frequencies. The lower the number the more uniform the frequency response is from seat to seat.

Now let’s make some distortion measurements. We’ll start with THD.

THD indicates the overall nonlinear performance of the device, and if it’s outside the limits it might indicate a poorly centered voice coil or mechanical defects. We measure total harmonic Distortion at 80 dBA,  this time using a stepped sign sweep from high to low with 12th octave steps.

Let’s run it…  As before, we power sum the spatial average of all six microphones to produce the THD power average curve, this black line here, which smooths out the standing waves and reflections picked up by the individual microphones. That’s not too bad –  if we look at the power average we’re getting roughly 2.2% from 50 to 10 kHz.

Next we’ll look at intermodulation Distortion. This is a good test for multi-way speaker systems with a crossover- if a small driver is trying to play back low and high frequencies simultaneously it’ll struggle to play both frequencies and create IM distortion. Here we use a two-tone stimulus with a fixed tone set to 50Hz, and a sweep tone that sweeps high to low from 20 kHz down to 150 Hz. I’ve already run a couple of sweeps to set the auto delay and to Auto Range the input gain for the best signal to noise ratio – this is important to ensure that the harmonics are above the noise floor of the measurement. Now let’s start the measurement. 

OK… The graph shows the fundamental and total Intermodulation Distortion of the second and third order intermodulation products, power averaged from the six microphone array. As you might expect, there’s more IM distortion at the lower frequencies, but you can see an increase around 700 Hz – that’s probably a crossover frequency in this car. If we take the spatial average of all six mics we get an overall IM distortion level of 1.4%.

That’s all we have time for here – check out part 2 for Max SPL and more distortion measurements!

https://www.listeninc.com/wp/media/2025/06/Car-Audio-Demo-Part-One-TN.png 1080 1920 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-06-16 14:19:532026-08-28 14:23:23Car Audio Measurement – Part One

Standardized Automotive Audio Testing Seminar

December 23, 2024/in Automotive Videos, Blog/by Zarina

Standardized automotive audio testing ensures repeatable measurements of in-car audio. This allows comparisons, improves interpretation of results, and makes system-level specifications more meaningful, facilitating alignment between vehicle manufacturers (OEMs) and Tier 1 suppliers.

In this 40 minute seminar, Steve Temme presents the current status of standardized automotive audio measurements. He shares the work of the AES TC-AA committee (of which he is a member), outlining their recently-published white paper on automotive measurements. He discusses the test configuration – demonstrating with a real car – and explains the hardware setup, test signals, and measurement specifics for frequency response, impulsive distortion and Max SPL. He goes beyond the TC-AA recommended measurements to also demonstrate THD, IM distortion, and spectral uniformity and explains how they help to more fully characterize the performance of an in-car audio system.

 

Automotive measurement demonstrations include

System characterization

  • System characterization
  • Frequency response
  • Seat-to-seat Spectral Uniformity
  • THD
  • Intermodulation distortion
  • Overall Max SPL and at 10% THD

Vehicle integrity measurements

  • Impulsive distortion
  • Crest Factor
  • Perceptual Rub & Buzz
  • Time Transients

Presenter: Steve Temme
Duration: 40 Mins

Automotive Measurement Resources

This seminar was originally broadcast on December 17th 2024. The recording above does not include the live Q&A at the end for attendee confidentiality reasons. However, several links to additional resources were provided during the Q&A session, and these are provided below.

Testing Using the A2B interface: A short video.

TC-AA Test Sequences for use in SoundCheck: Pre-written test sequences to make measurements in line with the TC-AA recommendations using SoundCheck (free)

Active Road Noise Reduction Measurement: A short video demonstrating ANRR measurements in a car.

More about enhanced Perceptual Rub & Buzz (ePRB): Web page with more detailed information about the Perceptual Rub & Buzz algorithm used in this video.

More about Transient Distortion Detection (eLP): Web page with more detailed information about enhanced Loose Particles, a transient distortion detection algorithm used in this video.

Automotive Audio Measurements in SoundCheck: Main webpage on automotive audio measurements.

 

 

https://www.listeninc.com/wp/media/2024/11/Automotive-Seminar-TN.png 2160 3840 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2024-12-23 12:07:272026-08-28 15:00:30Standardized Automotive Audio Testing Seminar

Road Noise and Active Road Noise Cancellation Measurements (100 Things #94)

December 7, 2023/in 100 Things Videos, Automotive Videos, Blog/by Zarina

Road Noise and Active Road Noise Cancellation Measurements are easy with SoundCheck. Everyone’s familiar with measuring headphone active noise cancellation with SoundCheck, but did you know it’s also great for in-car measurements of road noise and evaluation of road noise cancellation systems? Simply connect the USB-powered AudioConnect 2 to your microphones and laptop, and start making measurements. Watch this short video to see how easy it is with this compact and cost-effective package.

Make Road Noise and Active Road Noise Cancellation Measurements

Learn more

Read more about in-car road noise measurements.

Learn more about automotive testing using SoundCheck.

 

Video Script: Road Noise and Active Road Noise Cancellation Measurements

Everyone’s familiar with measuring headphone active noise cancellation with SoundCheck, but did you know it’s also great for measuring active road noise cancellation and road noise reduction in cars?

In this application, you want to measure the road noise at the location of the driver or passenger ears. A simple and cost-effective way to do this is to position two microphones near the outside of your ears or use a Head and Torso simulator. Here, we attached two SCM microphones to a Listen hat using some clips – we call this a low-budget HATS. This has the added advantage that if you are out on real roads, you can measure in the driver’s position.

Our configuration is simple. The microphones are connected to an AudioConnect 2 audio interface for microphone power and signal conditioning. This is a great application for this interface, as it’s USB powered, so you don’t need a power outlet in your car – you can just run it off your laptop. The AudioConnect 2 is connected via a single USB cable to the computer that is running SoundCheck for analysis.

As you can see, it’s a compact setup that easily fits on your dashboard or passenger seat.

To measure road noise, we simply need to drive at a fixed speed, remain silent – that means no talking, coughing, or children in the back seat –  and record for a fixed period of time. You can then look at both the sound pressure level and the frequency spectra of the road noise.

To evaluate a road noise reduction system, simply repeat the measurement with the noise cancellation turned on and subtract one result from the other to provide a value for the noise-reduction system of the car.

This is just one of many automotive audio measurements you can make with SoundCheck. Others include end of line QC, evaluation of components, tuning, Max SPL, impulsive distortion, Buzz, Squeak and rattle, POLQA analysis of communications systems and more. Check out the automotive section of our website for more information.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_94_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2023-12-07 00:30:522026-08-21 14:55:46Road Noise and Active Road Noise Cancellation Measurements (100 Things #94)

Test Automotive Audio via A2B Interfaces (100 Things #75)

July 20, 2023/in 100 Things Videos, Automotive Videos, Blog/by Devin Vaillancourt

SoundCheck features full integration with A2B interfaces, allowing seamless audio measurements with all of SoundCheck’s features and functionality. A2B interfaces connect to SoundCheck using an ASIO stream, which appears in the hardware table just like any other audio device. A2B devices are great for automotive infotainment systems as they are lightweight and easily configured, replacing traditional heavy copper wiring. A custom VI in SoundCheck even allows for A2B interface configuration during a sequence.

Test Automotive Audio via A2B Interfaces

Learn more about using testing automotive audio with SoundCheck

Learn more about connecting to automotive infotainment systems, and using SoundCheck for testing automotive audio, infotainment systems, active road noise cancellation, and more.

Video Script:

Did you know that SoundCheck can be used to test audio devices using the A2B interface? A2B is a high bandwidth, bidirectional, digital audio bus. It transports data, and controls information, clock and power, using a single, 2-wire unshielded twisted pair cable. A2B was developed for automotive applications, replacing heavy copper wire in vehicles with an easy to configure, lightweight system. But it has expanded to be used in other applications, such as distributed audio. For example A2B could be used to wire speakers and microphones used in an office conference room.

SoundCheck can access the audio streams of A2B audio interfaces, such as those from Mentor or Analog devices. Once the A2B configuration is set using the third party setup, ASIO streams can be selected in SoundCheck’s hardware table and used to test an audio components such as hands-free microphones. I’m using the Analog Devices A2B Soundcard connected to nodes with 4 PDM microphones. I can configure my current setup using Sigma Studio. Once that is done, I select “Link Compile Download” in Sigma Studio. This sends the project configuration I made to all my connected devices.

Now in SoundCheck, I’m able to go to Setup > Hardware, and choose the Analog Devices A2B SoundCard ASIO stream as my audio interface. Now that this is setup, I can get data in and out of the A2B interface just like any other audio interface. This means I can use SoundCheck to test all components of an infotainment system or A2B based distributed audio system, ranging from speakers and microphones to more complex communications and voice recognition tests.

https://www.listeninc.com/wp/media/2023/07/100-Things-75-thumbnail.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2023-07-20 14:17:562026-08-21 13:32:28Test Automotive Audio via A2B Interfaces (100 Things #75)

Measuring Max SPL of a Vehicle Infotainment System (100 Things #42)

November 10, 2022/in 100 Things Videos, Automotive Videos, Blog/by Zarina

SoundCheck is ideal for making in-car measurements such as Max SPL, frequency response and distortion. In fact, SoundCheck is the only full-featured audio test system that offers true nth octave real-time multichannel analysis of 6 microphones simultaneously, that we need for some in-car measurements.  In this short video we demonstrate how we can make Max SPL measurements using a 6 microphone array with SoundCheck and an AmpConnect 621 audio interface. You could make these measurements as part of an end-of-line QC test, in the R&D lab, or to compare various car infotainment systems.

In-Car Max SPL Measurement

Learn More About Automotive Measurements

Watch our Automotive Measurement Seminar in which we make in-car measurements of Max SPL, Frequency response and Buzz, Squeak & Rattle.

Read a short article about the work that the AES Technical Committee on Automotive Audio is doing on Max SPL measurements.

A free pre-written SoundCheck test sequence is available to measure both the Max SPL Spectrum and a single, power averaged value for Max SPL in line with the AES TC-AA working group’s proposed guidelines.

A comprehensive resource on in-car Max SPL measurements is the Audio Engineering Society Technical Committee on Automotive Audio (TC-AA). Their in-vehicle measurements white paper (draft) aims to define repeatable and defined car audio system measurements and in addition to the measurement methods, contains information on standardized test configuration, for example microphone and seat positioning.

Main webpage on SoundCheck for Automotive Measurements.

 

Video Script: Measuring Max SPL of a Vehicle Infotainment System

Did you know SoundCheck can make in-car measurements such as Max SPL, frequency response and distortion? In fact, SoundCheck is the only full-featured audio test system that offers true nth octave real-time multichannel analysis of 6 microphones simultaneously, that we need for some in-car measurements.  In this short video I’m going to demonstrate how we can make Max SPL measurements using a 6 microphone array with SoundCheck and an AmpConnect 621 audio interface. You could make these measurements as part of an end-of-line QC test, in the R&D lab, or to compare various car infotainment systems.

In this test, we use a 6 microphone array to represent the driver’s head. We mount it on a tripod so that it’s easily adjusted to the position where the head would be.

This is placed in the driver’s seat of the car, with the tripod legs as far back on the seat as they’ll go, right against the backrest. The height and angle of the seat are set to the minimum or lowest position. The AES is working on a proposed standard for this type of measurement that defines some very specific dimensions between the pedal and backrest, the height of the stand, and the inclination of the back rest. For this demo, I’m not going to be that precise, but as you can see, I am making sure that I have recorded the dimensions I am using, and the mic array is in a fairly typical driver head position.

Now let’s measure Max SPL. We’ll use broadband monophonic pink noise and we’re going to crank the volume to the max   – even outside of the car this is going to be loud!

It’s hitting 110 dB and we’re going to play it for 30 seconds and take the linear average or Leq. Here you can see the readings on the six microphones, and the black line representing the spatial power average. The test sequence is calculating the overall Max SPL as 111 dB C weighted, and also displays the Max SPL spectrum from 20Hz to 20 kHz.

If you’d like to learn more about in-car measurements, check out our automotive measurement seminar, in which we also demonstrate frequency response and distortion measurements. You can find this in the audio measurements playlist on our Youtube channel! This test sequence that I just used for measuring Max SPL is also available for download, free of charge, from our website.

 

https://www.listeninc.com/wp/media/2023/11/100_things_42_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-11-10 17:10:492026-08-24 16:49:47Measuring Max SPL of a Vehicle Infotainment System (100 Things #42)

Automotive Audio Measurements (Seminar): Frequency Response, Max SPL, Buzz, Squeak & Rattle

July 22, 2022/in Automotive Videos, Blog, Seminar Recordings/by Zarina

In this practical online seminar, Steve Temme demonstrates in-car measurement of frequency response, Max SPL, and Buzz, Squeak and Rattle using a Bluetooth connection. He discusses considerations such as physical setup, infotainment system controls and the measurement parameters. We then discuss connectivity for automotive testing, explaining and demonstrating the various connectivity options including USB drive, Bluetooth and A2B bus. Finally, we take a look at some of the other audio measurements that you can make using SoundCheck, for example active noise cancellation and voice assistance readiness.

Automotive Audio testing demonstrations include:

  • Frequency Response
  • Max SPL and Max SPL Spectrum
  • Buzz, Squeak & Rattle
  • Connectivity Options – USB, Bluetooth, A2B bus
  • ANC and Voice assistance readiness

Presenters: Steve Temme
Duration: 32 Mins

Automotive Audio Measurement Resources

This seminar was originally broadcast on July 21st 2022. The recording below does not include the live Q&A at the end for attendee confidentiality reasons. However, several links to additional resources were provided during the Q&A session, and these are provided below.

  1. Test sequence for in-car audio measurements. This sequence measures the impulsive distortion, frequency response, and maximum sound pressure level of a vehicle.
  2. An article by Steve Temme on automotive Max SPL measurements. Originally published in VoiceCoil magazine, June 2022.
  3. Read the full ISEAT paper, presented by Steve Temme at the 9th ISEAT Conference (2024) Shenzhen, China

More about how to Measure Automotive Audio

Check out our main page on Automotive Audio Testing, which includes links to test sequences, relevant products and more.

Learn more about Connecting to Automotive Infotainment Systems

Maximum SPL measurements in cars

Buzz, Squeak and Rattle measurements

AES Technical Committee on Automotive Audio. Listen, Inc. works closely with this group to ensure that our measurement capabilities align with the measurements recommended by the AES.

More about Standardized Automotive Audio Testing

Check out our latest seminar video where Steve Temme presents the current status of standardized automotive audio measurements. It covers key tests recommended by the AES Technical Committee on Automotive Audio, including frequency response, Max SPL, and impulsive distortion, with real in-car demos. It also explores extended measurements such as THD, IM distortion, and spectral uniformity to give a more complete picture of system performance.

Standardized Automotive Audio Testing Seminar

https://www.listeninc.com/wp/media/2022/07/seminar-thumbnail-1.png 861 1458 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-07-22 17:58:132026-08-27 15:25:50Automotive Audio Measurements (Seminar): Frequency Response, Max SPL, Buzz, Squeak & Rattle

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top