Quickly input serial numbers, lot numbers, and more by integrating a barcode scanner with SoundCheck. In this video, we demonstrate how easy it is to set up and use.
Additional Resources for SoundCheck
Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.
Video Transcript: Using Barcode Scanners with SoundCheck
Integrating barcode scanners with SoundCheck allows you to quickly input serial numbers, lot numbers, and other device and test information. Let me show you a quick demo.
Let’s plug my USB barcode scanner into my computer. It shows up as a standard input device. It’s plug and play, and once it’s connected, it’s ready to use. Instead of typing in the serial number, I can now use my barcode reader to capture the serial number on my device, lot number, or test stand location.
It can also be used in a test sequence. Here I have a sequence that stores the serial number, firmware version, and test stand location as metadata. When I run the sequence, It prompts for my device barcode, which is the serial number … barcode scan … lot number … barcode scan … then the chip barcode, which is the firmware version, … barcode scan … and test stand location.
Next, the test runs. Here, we’re measuring the frequency response, impedance, and THD.
Now, let’s check the metadata. When I click the result in the memory list, you can see the serial number, firmware version, and test stand location that we captured using the barcode scanner.
https://www.listeninc.com/wp/media/2024/08/SoundCheck-Tips.png10801080Julius Wijonohttps://www.listeninc.com/wp/media/logo.pngJulius Wijono2024-08-13 01:30:582026-08-27 14:05:57Using Barcode Scanners With SoundCheck
Ensure your display windows remain intact during sequence editing and runs by using the display lock feature. In this video, we demonstrate how to lock and unlock your display using the padlock icon in the memory list.
Additional Resources for SoundCheck
Detailed explanations of how to configure your SoundCheck display can be found in the SoundCheck manual.
Video Transcript: How to Lock Display Windows on SoundCheck
If you want your current display configuration to remain intact during sequence editing and sequence runs, you can lock it. When a display is locked, the layout cannot be changed in any way. Simply click the padlock icon in the memory list to lock and unlock the display. The padlock is green when the display is unlocked and red when locked.
The display lock affects all displays in all sequences. Display elements cannot be closed or resized, and the minimize and maximize buttons are removed from the display headers. New displays can be opened, but any changes to the displays are not saved.
This prevents you from closing the displays and is useful for maintaining your layout during editing and testing. The lock is always on for Technician and Operator access; only users with Engineer level access have the option of toggling the lock on and off.
For more information, refer to the memory list display menu section of the user manual or visit our website.
https://www.listeninc.com/wp/media/2024/07/Display_Windows_Blog_TN.png10801080Julius Wijonohttps://www.listeninc.com/wp/media/logo.pngJulius Wijono2024-07-30 09:45:042026-08-27 14:12:11How to Lock Display Windows on SoundCheck
SoundCheck allows you to protect items in the Memory List, ensuring that subsequent runs of your sequences don’t overwrite your existing test data. In this quick tutorial, we’ll show you how to manually and automatically protect your data, keeping it safe and easy to manage for future analysis.
Additional Resources for SoundCheck and Data Protection
Detailed explanations of how to protect data in SoundCheck can be found in the SoundCheck manual.
Video Transcript: How to Protect SoundCheck Data
Soundcheck allows you to protect items in the Memory List, so that subsequent runs of your sequences don’t overwrite any of your existing test data. By default, SoundCheck overwrites any data that isn’t protected or saved after each subsequent run of your sequence, or if the program is closed.
If you want to keep data and not overwrite it, you can simply select the data from an individual run of the sequence in the memory list and protect it, or , in your sequence you can auto protect the data, which will automatically save data for each and every iteration of the sequence.
Using the Memory List Sorting and Grouping functions, SoundCheck can save all protected and auto protected data to its own Auto Group in the Memory List, making it easy to distinguish what data is protected when recalling a sequence.
Here we are looking at a looping sequence in which pink noise is played back starting at -40dB, and increases in amplitude in 5dB steps for five passes.
Normally, after each run of the sequence, the data previously displayed is overwritten with data from the current run of the sequence. Once I select my recorded data in the Memory List, and right-click to select “Protect” it, that data and only that data will remain in the memory list and displayed on my graph.
If I instead choose to Auto Protect any chosen values, after every run of my sequence, the data for those values is appended in the memory list, and the five new curves are added to my display. This data isn’t deleted from the memory list unless you manually delete it, or if you discard it when closing SoundCheck.
This enables you to access and recall the data outside of the sequence in which it was originally recorded. Even live curves, created by the RTA, can be protected.
https://www.listeninc.com/wp/media/2024/07/SoundCheck-Tips-3.png10801080Julius Wijonohttps://www.listeninc.com/wp/media/logo.pngJulius Wijono2024-07-16 12:54:262026-08-27 14:11:42How to Protect SoundCheck Data
How do you measure a loudspeaker? In this short video, we demonstrate a basic production line loudspeaker audio test using SoundCheck – the same measurements that are made on thousands of loudspeaker production lines worldwide. It’s important to understand the measurements we make on this simple device, as they form the basis of the electroacoustic measurement suite for a whole host of devices ranging from headphones to smart devices and more.
In this demonstration we use a standard SoundCheck test sequence (included with the software) to measure a loudspeaker’s frequency response, distortion, sensitivity, polarity and impedance. We discuss the measurement results and the information they provide, and explain how the test sequence works. Like all SoundCheck test sequences, it can easily be customized and expanded to add additional analyses.
Watch this Video Demo of Measuring a Loudspeaker
Learn More about How to Test Loudspeakers
Here are some of our other online resources for more information on how to measure loudspeakers:
You can also check out our wide range of pre-written test sequences for loudspeaker testing. These can be used as-is or modified for your specific requirements, saving you considerable test development time. https://www.listeninc.com/products/test-sequences/
Video Transcript: How to Measure a Loudspeaker
In this short video, I’ll demonstrate testing a loudspeaker driver using SoundCheck with one of our standard speaker test sequences which is suitable for production or QC testing. This example sequence is one of many that come pre-installed with SoundCheck to get you up and running quickly.
When we’re testing for production or manufacturing, we need to make sure the manufactured speaker closely matches the specifications of the original design, and it’s important that the test is fast, accurate, and cost-effective. We’ll limit the test to the most important metrics – frequency response, distortion, sensitivity, polarity and impedance. First I’ll show you the test, then I’ll tell you a little more about the measurements we made.
My test setup is very simple. I have the SoundCheck test software installed on my computer, and all I need with this is a measurement microphone, plus our AmpConnect 621 all-in-one test interface. This is a high resolution audio interface which also includes microphone power, an amplifier, and impedance measurement, all in one unit with a single USB connection to the computer. This replaces the need for separate hardware and is true plug and play, making it quick and simple to set up and use, and of course very cost-effective.
The AmpConnect 621 comes fully calibrated from Listen. Because it’s true plug and play, I simply connect USB to my computer, power on and SoundCheck will auto-populate hardware inputs and outputs including calibrations, sampling rate, bit depth and more. I’ve already calibrated my measurement microphone, so let’s run the sequence.
When I hit ‘start’ you’ll hear the test signal play. We’re using our unique smooth stepped sine wave, the Stweep as this is fast, and all the analyses are done from a single test signal. The microphone captures the signal, the amplifier impedance circuit measures the current, and the software analyzes the responses.
There you go, we just ran a complete loudspeaker test. Did you notice how quick and easy that was? Let’s take a look at the results.
This graph shows the Frequency response and impedance. Frequency response is the best overall test to make sure the loudspeaker is working properly, and here we’ve plotted the level vs. frequency on an XY graph. Ideally, the loudspeaker should have a flat response but in general, we are looking for a smooth response, especially in the midrange from 800 to 5kHz, without too many big dips or peaks.
We also have the impedance plotted on the same graph. This measures the resonant frequency of the loudspeaker, and should be a single, smooth and symmetrical bump. This tells us how the speaker driver will perform at low frequencies when mounted in a loudspeaker enclosure.
You can plot these separately if you prefer, I just have them together to save screen real estate. You can see that the left axis is marked in dB SPL for the frequency response curve, and the right indicates the impedance magnitude in Ohms.
Now let’s take a look at distortion. This sequence measures three types of distortion, THD, Rub & Buzz and transient distortion. THD is total harmonic distortion and, like frequency response, is a good overall indicator that the product has been correctly manufactured.
Rub & Buzz distortion is a periodic distortion caused by rubbing parts in the speaker, for example, an incorrectly centered voice coil or poorly trimmed lead wires. This is measured using our enhanced perceptual algorithm which examines higher order harmonics, typically 10th and above, using a perceptual algorithm that mimics the response of the human ear. This tells you whether you have any audible rub & buzz present in your device.
The third type of distortion that we measure is loose particles or transient distortion. Transient distortion is caused when debris gets trapped behind the dust cap during manufacture. Because these trapped particles vibrate randomly rather than periodically, we measure them in the time domain with our enhanced Loose Particles algorithm. What’s neat about this compared to the way that other people measure distortion is that we separate out loose particles from Rub & Buzz distortion – most measurement systems combine the two. This really helps with troubleshooting production line issues, as these distortion types are caused by very different problems.
Here’s our sensitivity measurement. This calculates the average level across the frequency range, and this is a good indicator of whether the loudspeaker magnet is properly magnetized and helps match speakers for headphones and multi-channel systems.
This is the polarity measurement. This is a simple check to ensure that the loudspeaker has been wired properly and the leads are not reversed. This is important because if leads are not correctly wired, you may encounter low frequency cancellation with other drivers or speakers in an enclosure.
So there’s all the measurements in our basic loudspeaker test sequence. And as you saw, it only took about a second!
Now I’m going to show you a little more detail about the test sequence I used. In SoundCheck, we use a sequence for any test that we want to run over and over again, as opposed to quick, on-the-fly measurements. Let’s open it up. It’s really simple to program a sequence, we have a massive library of steps, which are the building blocks for the sequence. And you simply drag and drop these and adjust the values. You can also create your own custom steps, but that’s a whole other topic in itself.
OK, so here is my sequence…
It executes this series of steps from the top down, and our memory list manages the data that is analyzed. You’ll see the step prefix: for example, this is a message step… this is a stimulus step… etc. In short, what we’re doing here is defining the test stimulus, playing it, recording the response from the reference mic and impedance circuit, and analyzing the response to calculate and display frequency response, impedance, sensitivity, distortion, etc.
Let’s take a closer look at the stimulus step. In this test, I used a compound stimulus for speed. It has 2 parts to it – the frequency sweeps from 20kHz to 300Hz in 12th octave steps and then transitions to 3rd octave steps at low frequencies from 250Hz to 50Hz. Because loudspeakers tend to have a smoother response at low frequencies, we can still get an accurate measurement with lower resolution. Optimized test frequency resolution and sweeping from high to low frequencies to minimize speaker ringing, saves us valuable test time.
Another part of the sequence I want to show you is limits. I ran this sequence with arbitrary limits, I didn’t set them for my device, so you probably noticed it failed some of them. In a production environment, we typically measure a golden unit or run statistics on a bunch of good units, then set pass/fail limits based on desired tolerances. These limits are easy to set, and we have many options from straight lines to offset curves.
And lastly, here we have the display step. This defines how we want the data to be displayed, and you can see here it’s instructing the software to plot the data on the graphs and tables I just showed you.
If I wanted to automatically save data from the sequence, this would be easy to do. I’d just need to add an Auto Save step to tell it what to save and where to, and that will happen after every measurement. SoundCheck can save data to a wide range of formats including Excel, and MATLAB to name a few, and can even save metadata along with the results.
So that’s how you can implement a complete loudspeaker test right out of the box with SoundCheck – all you would need to do to make this sequence work for you is set appropriate test levels and limits. Of course there are also countless ways you could expand and adapt this for your needs beyond the production line. For example, you could add a bluetooth interface if you need to test a bluetooth speaker, you can run open loop tests for voice-activated speakers, or add a turntable if you need to make directional measurements and plot the polar responses. And there is a whole load of additional software functionality if you are doing lab measurements, for example, Thiele Small parameters, custom equations and more.
If you’d like to learn more about loudspeaker testing and/or discuss your test application, please contact Listen or your local distributor.
https://www.listeninc.com/wp/media/2024/07/Thumbnail-2.png7201280Julius Wijonohttps://www.listeninc.com/wp/media/logo.pngJulius Wijono2024-07-10 11:33:002026-08-27 15:13:11How to Measure a Loudspeaker
AudioConnect 2 Support is available in SoundCheck version 21 and later.
SoundCheck 21 supports AudioConnect 2TM, Listen’s new compact and high resolution (up to 192 kHz) dual-channel audio interface. AudioConnect 2 is designed for measurements anywhere from the production line to out in the field. With the option to power it via a laptop USB-C port, it is compact, portable, and easy to use. Set-up and configuration is extremely simple and fast with full plug-and-play functionality and TEDS support for automatic identification, configuration and calibration of microphones and accelerometers. AudioConnect 2 has no front panel controls; it is exclusively configured via the SoundCheck software. This provides an added level of test integrity by ensuring that settings cannot be inadvertently adjusted outside of your test configuration.
https://www.listeninc.com/wp/media/logo.png00Julius Wijonohttps://www.listeninc.com/wp/media/logo.pngJulius Wijono2024-07-08 11:16:392026-08-28 15:13:43AudioConnect 2 Support in SoundCheck
Metadata for Simplified Data Collection and Recall is available in SoundCheck version 21 and later.
SoundCheck’s new Metadata feature simplifies data collection and documentation. Curves, values, results and waveforms can now be saved to a single TDMS file, along with all test parameters acquired during the sequence run such as test conditions, test sequence used, operator, serial number, microphone position, data entered via a message step and more. Both system fields (e.g. sequence name, operator, SoundCheck serial number) and user-defined fields can be stored. This data can be viewed or recalled in SoundCheck, as well as by certain other applications such as excel. The TDMS format used to save the data is a fast binary format, minimizing read and write times when a sequence is running. This feature has many uses in both R&D and production applications.
Watch the video demo of Metadata for Simplified Data Collection and Recall
https://www.listeninc.com/wp/media/logo.png00Julius Wijonohttps://www.listeninc.com/wp/media/logo.pngJulius Wijono2024-07-08 11:09:412026-08-28 15:09:00Metadata for Simplified Data Collection and Recall in SoundCheck
Multichannel Spectrum Analyzer is available in SoundCheck version 21 and later.
A new multi-channel FFT analyzer replaces SoundCheck’s original single channel spectrum analyzer. This high resolution constant bandwidth linear filter analyzer enables any number of live FFT spectra to be simultaneously viewed in real time on the same graph. It offers many options including standard and custom windows and various weighting options. Averaging times and resolution are continuously variable and can be user-specified. Average, maximum and minimum levels can be identified, and overload and real time indicators highlight any problematic signals. Channel subtraction, maximum, minimum and power average can be calculated and displayed in real time. This saves screen space and allows direct comparisons when making multiple FFT measurements. Live FFT curves are displayed in the memory list and can be dragged and dropped into any graph for easy comparison to limits and reference curves. SoundCheck’s multichannel FFT and RTA can be viewed simultaneously, either side by side or superimposed on one another. This enables both high resolution spectra and constant percentage bandwidth resolution (eg. 1/12th Octave) measurements to be viewed at the same time. Typical applications include analyzing broadband speech signals while accurately identifying single frequency interference tones, or analyzing intermodulation distortion in the presence of speech or music.
Watch the video demo of Multichannel Spectrum Analyzer
Enhanced Loose Particle Detection is available in SoundCheck version 21 and later.
A new enhanced Loose Particle detection algorithm for measurement of transient distortion is more accurate and offers improved correlation to subjective listening. The new algorithm builds on the success of Listen’s original 2005 algorithm, the first method developed for detecting random transient production line defects such as rattling parts, loose particles and other foreign material in the voice coil gap. Based on the same time-envelope analysis, it introduces advanced algorithmic techniques to better highlight the loose particle defects while minimizing other artifacts. Advanced filtering methods enable the stimulus to be removed from the response so only the defects can be heard. This makes it easy to set limits in line with subjective tests. In addition to identifying distortion caused by foreign material in the voice coil gap of a speaker, it is also valuable for detecting rattling buttons on smart devices and Bluetooth speakers, and identifying buzz, squeak and rattle in automotive audio applications.
Watch the video demo of Enhanced Loose Particle Detection
Metadata lets you save additional test information with your SoundCheck results. In this short support tips video we demonstrate how to open up that data in Excel for further manipulation and analysis.
Additional Resources for SoundCheck and Metadata
Detailed explanations of how to check metadata in SoundCheck can be found in the SoundCheck manual.
Metadata was introduced in SoundCheck 21 and it’s useful because it lets you save test information such as product name, factory location, test operator, or even subjective ratings, along with the test results. Let’s take a look at how to open up that data in Excel for further manipulation and analysis.
Here, I’ve modified the standard speaker test sequence that we provide with SoundCheck, to save product name, factory location and test operator data as well as the measurements – fundamental, THD and average sensitivity – to a TDMS file on my desktop.
Now we’ll run the sequence, and you can see we have a measurement and it’s saved as a TDMS file on my desktop.
To open this in Excel, we first need to download the National Instruments TDMS Excel add-in from their website.
Now that’s downloaded and installed, we can open up a blank Excel workbook, go to the ‘Add In’ page, and here you see the TDM importer button on the left hand side. We’ll click on this, and navigate to the test data file and open it. You can see this brings in all the measurements, as well as the metadata that we added to the sequence.
This makes it simple to manipulate and analyze your results including all the additional information contained in your metadata.
https://www.listeninc.com/wp/media/2024/06/SoundCheck_Blog_Thumbnail_TDMS_Files.png10801080Julius Wijonohttps://www.listeninc.com/wp/media/logo.pngJulius Wijono2024-07-02 10:50:552026-08-21 12:24:42How to Open TDMS Files in Excel
Virtual Instruments Enhancements are available in SoundCheck version 22 and later. The multi-instrument, which includes both an RTA and FFT analyzer, now includes additional display and calculation options. A single multi-instrument can have multiple simultaneous display windows. These are now detached from the control panel, and can be re-sized and re-positioned for unlimited desktop layout flexibility. Multi-instrument windows can now also be used in a sequence step to offer a clear readout of results while the sequence is running. Real time calculation can be implemented on a combination of live and stored (active and static) curves simultaneously which enables clear display of the difference between live results and a reference curve. Finally, a new dB addition option expands its calculation capabilities.
Watch the video demo of Virtual Instruments Enhancements