Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

all videos

Car Audio Measurement – Part One

June 16, 2025/in Audio Measurement Videos, Automotive Videos, Blog/by Julius Wijono

How do you measure car audio? In this video, we demonstrate a complete car audio measurement setup using SoundCheck, based on the AES TC-AA recommended configuration. You’ll see how to test automotive infotainment systems inside a real vehicle using a calibrated 6-microphone array in the driver’s seat to capture spatially averaged data. We walk through measurements for frequency response (using both correlated and uncorrelated pink noise), seat-to-seat spectral uniformity, total harmonic distortion (THD), and intermodulation distortion.

Watch this Video Demo of Car Audio Measurement Techniques

Learn More about How to Perform Car Audio Measurements

Here are some additional resources:

  • Standardized Automotive Audio Testing Seminar: https://www.listeninc.com/standardized-automotive-audio-testing-seminar/
  • Automotive Audio Measurements Seminar (Frequency Response, Max SPL, Buzz, Squeak & Rattle): https://www.listeninc.com/automotive-audio-testing-seminar-2/
  • Standardized Automotive Audio Measurements (presented at ISEAT conference): https://www.listeninc.com/standardized-automotive-audio-measurements/

Video Transcript: How to Measure Car Audio – Part One

Today I’m going to demonstrate in-car audio measurements, specifically frequency response, spectral uniformity and THD, using the test configuration recommended in the AES TC-AA white paper on automotive measurements.  

We’re using a precisely positioned 6-mic array in the driver’s seat to represent our listener. This is connected to  an AmpConnect 621 Audio Interface. Our laptop is also connected to a measurement-grade Bluetooth interface  which we’re using to send the stimulus signal into our car’s head unit. If you want to know more about the test configuration, you can download the AES white paper, and we also have full details on our website.

I’ve already calibrated the inputs and outputs of the test system by measuring the sensitivity of each individual microphone in the array and storing these readings in the software calibration menu. I also calibrated the audio interface to ensure proper response frequencies and levels, both in the analog and digital domains, so we’re ready to measure.

First we’ll measure frequency response using 80 dBA monophonic, correlated, pink noise on both channels. I’ve already calibrated the level, and we’ll play a short burst. Ideally the stimulus should be longer but I’ll still get a pretty accurate result. Let’s start the sequence. Enter the information it’s asking. OK, the overall level is 79.5 dB, quite close to 80, with a delay of 1.45 seconds which SoundCheck has measured and compensated for. What I’ve actually done here is a 1/3 octave analysis of each individual microphone, from 1 through 6, and you can see the difference due to location, reflections, and standing waves in the car. The black curve is the overall power average or spatial average of all six mics and represents what a human would hear.

Now let’s  measure the frequency response using uncorrelated pink noise. This randomizes the noise between the two channels rather than playing identical signals out of both. We expect to see some low frequency cancellation due to phase differences.

So let’s run the sequence… and we’ve got our results.

We can compare the results with uncorrelated noise to the results when I used correlated pink noise. Let’s bring them both onto the graph… The orange line is the correlated spatial average and the black line is the uncorrelated spatial average. We can see the uncorrelated pink noise has  about 3db less output than the correlated pink noise below 100 Hz and very little above 1KHz.

We can also look at the seat to seat spectral uniformity. Ideally each passenger in the car experiences the same high quality sound, but it’s hard to independently equalize the loudspeaker playback system for each seat in the car. Typically the driver’s seat is favored, the frequency response in the other seats is not quite as smooth.

I’m not going to do this now as it takes a while, but I’ll show you some measurements I made earlier. I repeated the first frequency response measurement with correlated pink noise in each of the car’s four seats and here you can see that the base performance in the rear passenger seats, the orange and green lines are not as extended or smooth as the front passenger seats.

To calculate the seat to seat spectral uniformity, We compare the individual seat response to the maximum and minimum responses to find the seat with the biggest difference. In this example both the left and right rear passenger seats have over 10 dB difference from the front seats at some

Frequencies. The lower the number the more uniform the frequency response is from seat to seat.

Now let’s make some distortion measurements. We’ll start with THD.

THD indicates the overall nonlinear performance of the device, and if it’s outside the limits it might indicate a poorly centered voice coil or mechanical defects. We measure total harmonic Distortion at 80 dBA,  this time using a stepped sign sweep from high to low with 12th octave steps.

Let’s run it…  As before, we power sum the spatial average of all six microphones to produce the THD power average curve, this black line here, which smooths out the standing waves and reflections picked up by the individual microphones. That’s not too bad –  if we look at the power average we’re getting roughly 2.2% from 50 to 10 kHz.

Next we’ll look at intermodulation Distortion. This is a good test for multi-way speaker systems with a crossover- if a small driver is trying to play back low and high frequencies simultaneously it’ll struggle to play both frequencies and create IM distortion. Here we use a two-tone stimulus with a fixed tone set to 50Hz, and a sweep tone that sweeps high to low from 20 kHz down to 150 Hz. I’ve already run a couple of sweeps to set the auto delay and to Auto Range the input gain for the best signal to noise ratio – this is important to ensure that the harmonics are above the noise floor of the measurement. Now let’s start the measurement. 

OK… The graph shows the fundamental and total Intermodulation Distortion of the second and third order intermodulation products, power averaged from the six microphone array. As you might expect, there’s more IM distortion at the lower frequencies, but you can see an increase around 700 Hz – that’s probably a crossover frequency in this car. If we take the spatial average of all six mics we get an overall IM distortion level of 1.4%.

That’s all we have time for here – check out part 2 for Max SPL and more distortion measurements!

https://www.listeninc.com/wp/media/2025/06/Car-Audio-Demo-Part-One-TN.png 1080 1920 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-06-16 14:19:532026-08-28 14:23:23Car Audio Measurement – Part One

Troubleshooting Hardware with Self-Test Sequences

June 10, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
The first thing you should do when getting unexpected audio measurement results is run a self-test sequence. In this video, we’ll walk through how these sequences confirm that your audio interface is correctly configured by analyzing frequency response, sensitivity, and latency.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Troubleshooting Hardware with Self-Test Sequences

The first thing you should do if you’re getting unexpected audio measurement results, is run a self test sequence to make sure the audio interface is correctly configured. These sequences send a test signal through the output and compare it with the signal received in the looped back input. If the frequency response, sensitivity, and latency are as-expected, it is configured correctly.

You can find hardware self-test sequences in SoundCheck’s Sequences > calibration folder.

For each type of Listen hardware, there is a specific sequence that automatically routes the signal back from output to input. If you are using third party hardware, you can use the generic self test sequence. This one requires you to physically loop back inputs and outputs.

Let’s take a look at the AmpConnect 621 Self Test sequence. It includes a PDF that explains how the sequence runs and what expected results are.

You can see here I have the AmpConnect 621 connected and configured in my Listen hardware editor. SoundCheck automatically reads the Vp values and calculates the latencies for Listen Hardware.

If you’re using third party hardware, it is possible for these values to be set incorrectly, so the voltage going out is not what is accounted for or the latencies might be incorrect.

Let’s run the self-test sequence. It is going to give me some instructions.

It’s automatically switching the signal paths, testing all of my inputs and outputs. And the end result gives me a pass or fail to confirm if my interface is working correctly or not, as well as all the test results.

Here we see that the frequency response looks good, my latencies are correct (just off maybe a little), and my noise spectrum and the amplifier response also look good.

If my self-test had failed, for example the sensitivities or latency were wrong, I’d need to recalibrate the hardware input, import in the calibrated hardware files, and do some additional troubleshooting.

If you’re using a WDM driver for your interface, it’s also important to check the Windows volume mixer is set to 100%.

This can also be checked in the Playback and Recording tab of the sound settings. Make sure the levels are set to 100%, and any Audio Enhancements and Spatial Audio are disabled. Note that this is only applicable for WDM or WASAPI devices, as ASIO devices don’t go through the Windows mixer.

Once you’ve confirmed your audio interface is correctly configured, you can move on and troubleshoot the rest of your signal chain – the cables, speakers, microphone etc.

https://www.listeninc.com/wp/media/2025/06/Troubleshooting-Self-Test-Sequence-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-06-10 05:02:262026-08-27 14:19:02Troubleshooting Hardware with Self-Test Sequences

Advanced Bluetooth Settings in SoundCheck

May 27, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Looking to access advanced Bluetooth functionality in SoundCheck? This video demonstrates how to enable features like ‘man-in-the-middle’ connections and AVRCP volume control using command line tools for supported devices.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Advanced Bluetooth Settings in SoundCheck

While SoundCheck’s built-in Bluetooth message steps address the majority of use cases, there are some additional controls for specific applications, such as ‘man-in-the-middle’ connection or controlling AVRCP volume. You can access these from the command line. Let’s take a look.

If you haven’t already installed the driver for your bluetooth device, you’ll need to do this first. Make sure you select the correct driver for your device. I already have my driver located here on my local C-drive.

I am using a BTC4148A, so I will use the command name “btcutil”. This name depends on your device so check the documentation for your device to make sure you are using the appropriate name. 

Copy the file path, and now  let’s run it from the command line. 

To view the current settings, you can either use the command “–list” or “/l”.

A list of available commands is in the documentation, or you can use the command “–help” or “/?”. These are all the commands available to use with the device.

Now let’s enable  “Man in the Middle” using the command line utility. If we check the current status, we can see it’s set to zero, or off. Now I’ll switch it on using the command “/mm ON” and if we go back and check the settings again, you can see that it’s now set to 1 which means this function is now enabled.

Another useful tool is controlling the AVRCP volume. This lets us control the volume of a paired bluetooth speaker.

I’ll use the query command for the interface to scan for bluetooth devices. And I’ll set it to run for 5 seconds. 

The interface has discovered my Bluetooth speaker so I’ll copy the Bluetooth address and pair it. 

Now you can see it is paired, and we can change the AVRCP volume using the command “/av” and setting the volume between zero and 15, let’s set it to 10.

And, if we check the configuration, you can see the AVRCP volume is now set to 10.

So that’s how you can gain control over additional Bluetooth functionality through the command line. Give it a go, and contact Listen support if you need any additional help.

https://www.listeninc.com/wp/media/2025/05/Bluetooth-Settings-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-05-27 07:00:212026-08-27 14:17:11Advanced Bluetooth Settings in SoundCheck

Quickly Analyze Data with Offline Processing

May 13, 2025/in Blog, SoundCheck Tips Videos, Uncategorized/by Julius Wijono
Quickly explore new analysis options without modifying your original sequence. Learn how SoundCheck’s Offline Processing tools let you run individual steps manually, generate protected data, and easily compare results.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Quickly Analyze Data with Offline Processing

In SoundCheck, there might be times where you want to further process data that’s already captured. This could be from a sequence run or even data that was acquired on a completely different computer.

For example, in this sequence here,I ran an acquisition and got a frequency response with a time selective response. I might want to change some settings, and I might want to manipulate this data further. I could go into my analysis step and make changes, or  drag in additional post-processing. But if I’m just trying to investigate, I might not want to change the sequence that I’ve been using.

Here we can use the Offline menu. This lets us run any step in SoundCheck, but instead of in a sequence, we just run it manually.

So when I open up Offline Analysis, I can choose any step templates that are available in my Sequence Editor. Lets choose Time Selective Response analysis, and it  opens up the editor.

Now I can manually manipulate this, choose whatever settings I want, and then when I apply these settings, it will create protected data in my memory list with these settings. So here, I’ll configure my step, and pick my stimulus and response waveform. Now let’s say I want to see how this would look with a different windowing time. I just type in the new value here, click Apply, and this data is populated to my memory list as protected data.

I can view this alongside the measured data in my sequence to see what the changes would be. And I can keep doing this— every time I make a change and click Apply, I’m going to get additional protected data. It’ll be added to the memory list, and I can go through, quickly view these, and see which setting I want.

This is also useful for additional processing. If I close this step, I can delete the data I captured over here from the memory list, and I can process this curve further. Instead of changing a step that I already ran in the sequence, I can add in a completely new step.

For example, If I want to see the maximum value on this curve, I can open up a Post-Processing step… look look at the Maximum template…. choose my Fundamental, and when I click Apply, it’s added to my memory list, and I can view it on this table here.

The Offline menu gives a very quick and easy way to add new measurements and further process your data from a single menu without needing to write an entire sequence. 

https://www.listeninc.com/wp/media/2025/05/SoundCheck-Offline-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-05-13 08:00:172025-05-12 10:56:37Quickly Analyze Data with Offline Processing

Using the Equation Editor in SoundCheck

April 29, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Need to run custom equations in your test sequences? In this video, we show you how to implement complex formulas directly into your sequences using SoundCheck’s Equation Editor.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Using the Equation Editor in SoundCheck

In this video I’ll show you how to use the equation editor in SoundCheck. This optional module lets you add any custom equation as a post-processing step so you can use it within a sequence. For example, you might want to apply a complex formula from a technical paper or a specific standard to your data.

Let’s look at how it works. I have a simple example here on my right side. I have three input variables: A = 1, B = 2 and C = 3, and I have three equations to solve for X, Y and Z. And here I’ve calculated the values of X, Y and Z.

If you were to calculate this in a sequence without using the user equation editor, it would take almost 10 steps just to solve for X, Y and Z.

Let’s now implement this using the user equation editor.

I’ll create a new sequence,  and insert three operator numeric steps, A, B and C. 

I’ll initialize the values of A as 1, B = 2 and C = 3. Next I’ll add a user equation post-processing step. This opens up in two separate windows, one where we define the input and output values, and the second where we write the equation. You can always access context help while you’re doing this by hovering over a particular field.

I’ll start with the operand on my left side here. I’m using A, B and C as my input operands. These will be referred to as A0, A1, and A2 when I’m writing the equation. Next I’m going to write the actual equation in this post-processing window here 

X equal to A0 to the power of 2, plus  2 A0 A1  followed by a semicolon.

You can see this automatically creates the output value of X.

Now let’s write the second equation 

Y equals X log X plus A2, followed by semicolon

Now for the third equation…

Z equals the square root of XY, again followed by a semicolon.

If you need any help writing equations, appendix 9 in the manual shows all the available functions and how to use them inside the equation editor.

Since our input values are contained in the y-axis we don’t really need to show the x-axis in the outputs, and we know the units are linear so I’ll change that in my output and that’s it.

Now let’s run the sequence. I have a= 1 b= 2 c = 3 and I get the values for x y and z, and we can display these on a table.

So, as you can see, it’s easy to implement complex mathematical functions and formulae into your SoundCheck test sequences. This lets you do all the calculations you want on your data automatically, without leaving SoundCheck.

https://www.listeninc.com/wp/media/2025/04/User-Equations-Editor-Blog-TN-1.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-04-29 11:11:292026-08-27 14:21:41Using the Equation Editor in SoundCheck

Advanced Limit Settings in SoundCheck

April 15, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Take your pass/fail criteria to the next level with advanced limit settings in SoundCheck. In this video, we explore precision tools like floating X-axis limits, failed point curves, and detailed interpolation controls to help you fine-tune your measurement accuracy.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Advanced Limit Settings in SoundCheck

Today we’re going to look at some advanced limit setting options available in SoundCheck.

Let’s open up the limits editor. This is where you set Pass / Fail limits for your measurements.

The Data tab is where you enter your upper and lower limits and the specific data that the limits are to be applied to. In the Parameters tab you can set your method for aligning limits, you can read about all these options in the manual so I’m not going to review that now. Instead, I’m going to focus on the advanced parameter options, there’s some really useful functionality in there. 

We’ll just click on this ‘Advanced View’ checkbox here… and we get some additional useful controls.

The “Absolute Comparison Precision” field lets us set the number of decimal places for the limits, which affects the pass/fail margins. For example, say I have a curve with a limit of 80 deeBee set at 13.2kHz. If my data precision is set to 2, it sees my measurement to 2 decimal places and we can see it’s 80.18 deeBee which exceeds my 80 deeBee limit and it fails. If I now change that data precision to 0, that’s no decimal places, my 80.18 deeBee reading is now rounded down to 80 deeBee which is right on the limit so it passes. This gives you very tight control over your pass and fail limits.

The Mapping section controls linear versus log, as well as floating limits in X. This setting determines the interpolation of the data to the limit curves if it is linearly or log spaced. 

In this example, I have a curve with an upper limit on. I expect the result to pass but it does not. Let us find out why…

We’ll use a neat feature called “Output Failed Point Curves”. When you enable this, it generates additional curves showing exactly the points that failed in comparison to the upper and lower limits. You can also view these failed points in a table to see precise numerical values, and we see that the failed point was at 125Hz. 

Looking back in the limit step, we see that 125Hz has a value of 1.370%, and if we use simple linear math, the upper limit at 125Hz is 1.375%. So why didn’t the limit step pass? This is because we are making linear calculations of the upper limit, but the limit interpolates on a logarithmic scale as the x-axis displays the frequency domain, which is normally shown logarithmically. If we switch the mapping option to linear, the data is below the upper limit, and it passes. Let’s just zoom in and take a closer look…

Float limits in X allows limits to float back and forth along the X-axis for the best fit. This is useful if you’re applying limits to curves with sharp peaks and dips due to reflections for example. You also have control of the step size increments, and the maximum and minimum percentages that the limits can float. 

For example, I have a curve with a peak and I’d like the shape of the limit curve to match the shape of this peak, but apply it at the frequency where my new peak is. I’ll switch to my new curve, and when I apply the floating limit, it shifts to best fit the new curve peak. Notice that only the X-axis has changed and the Y-axis remains the same. 

I hope you found this demo of advanced limit setting features useful. Please check the SoundCheck manual for further details.

https://www.listeninc.com/wp/media/2025/04/Advanced-Limit-Settings-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-04-15 08:00:132026-08-27 14:09:54Advanced Limit Settings in SoundCheck

Microphone Measurement

March 24, 2025/in Audio Measurement Videos, Blog, Microphone Videos/by Julius Wijono

How do you measure a microphone? In this short video, we demonstrate how to accurately measure a microphone’s frequency response using SoundCheck. You’ll see how to ensure an accurate microphone measurement by using two different techniques that separate the microphone’s response from the source speaker’s influence. We cover two key methods: the Equalized Speaker Method, which calibrates the speaker using a reference microphone for a flat response, and the Substitution Method, which compares the test microphone to a reference microphone to remove speaker effects.

Watch this Video Demo of Microphone Measurement Techniques

Learn More about How to Perform Microphone Measurements

Here are some additional resources:

  • Free Microphone Frequency Response and Sensitivity test sequence: https://www.listeninc.com/products/test-sequences/free/microphone-frequency-response-and-sensitivity-test-sequence/
  • Free Microphone Substitution Method sequence: https://www.listeninc.com/products/test-sequences/free/microphone-frequency-response-and-sensitivity-microphone-substitution-method/

Video Transcript: How to Measure Microphones

The challenge with measuring the frequency response of microphones is that usually, the microphone’s frequency response is better than the source speaker used to play the test signal to measure it. This means you need to use measurement techniques that ensure you’re measuring the microphone and not the speaker. SoundCheck offers two great ways to do this.

The first is what we call the Equalized Speaker Method. First we measure the source speaker with a calibrated reference omnidirectional microphone that has a flat frequency response. We apply the reciprocal as a equalization  curve for the speaker at a constant sound pressure level, then measure the microphone under test or DUT in the same position as the reference mic.

The second method is the substitution method. Here, we first measure the source speaker with a reference microphone, then the source speaker with the microphone under test in the same location. Then we subtract the microphone under test result from the reference microphone to show just the characteristics of our DUT. Unlike the Equalized Speaker Method, the substitution method is not performed at a constant SPL which can result in a poor signal to noise ratio where the source speaker response rolls off at low and high frequencies significantly.

Let’s take a look at these measurements

Pre-written sequences for both of these methods come with the SoundCheck installation, so we’re going to use those today.

I’ll start with the equalized speaker method. I’m using an SCM measurement microphone as my reference microphone, and I’m using the AmpConnect 621 audio interface because as well as microphone inputs, it has an integrated amplifier to power my source speaker – a single driver, wide-bandwidth, Cambridge Audio Minx. This makes it easier to repeatedly position the microphones by pointing them at the center of the speaker.

First we need to equalize the speaker. We’re going to use SoundCheck’s built-in calibration sequence to do this.

It plays our stepped sine signal, measures the frequency response… we have a few reflections here. We take the reciprocal of the response and equalize the  output of the signal generator and measure again. You can hear its boosting the low frequencies instead of it being + or – 20 db its + or -1 db or less…. Because the speaker’s non-linearity it will be slightly different at different levels so we can equalize the equalization to further refine the EQ curve.

Here’s our speaker and we can see the EQ curve and the residual correction after EQ… and you can also see the phase here.

Now we’re all calibrated, let’s make a measurement. We use the same stepped sine sweep played  through the speaker, capture the frequency response, calculate the sensitivity at 1kHz, and display our results on a graph.

We also have a couple of arbitrary limit steps here – you’d want to customize them based on your device. Here we go…

Here you see the frequency response and phase— as you can see, it is fairly flat. And down here, we have our frequency response aligned to zero dB at 1 kHz, which is the standard way of displaying microphone response, and we can see our measured sensitivity is about -5.5dBv/Pa.

Now, let’s look at our alternative method—the Microphone Substitution Method.

In this method, rather than using an equalized speaker we first play our stepped sine sweep and  measure with a calibrated reference microphone. We then substitute our microphone under test and measure again. Next we subtract out the measurement of the reference microphone to get the raw response of our microphone under test. This removes the effect of the speaker’s response on the measurement.

We need to make sure we have the test microphone and the reference microphone in exactly the same position to minimize variance in the measurement.

If we look at our test sequence, we can see that we have two  acquisition steps, one for the reference mic and one for the mic under test, and a curve division step using the division operation in linear mode.

Let’s run the sequence.

It reminds me to make sure my reference mic is calibrated, which it is, and it prompts me to put it in front of the mouth simulator… let’s do that. We’re using a source speaker instead, but you can use a mouth simulator if you prefer, they both fulfil the same function.

It’s acquired the data, and now it’s asking me to put the microphone under test in its place… I’ll try to get it as close to the same spot as possible.

Let’s continue. And it’s acquired the data, performed the division, and here is our response.

This lower graph here shows the responses of the two microphones – the blue line is the reference mic and the orange line is our mic under test. And this top graph here shows the normalized frequency response including phase after the division.

You can see the sensitivity at 1 kHz is -6 dB V/ Pa, which aligns well with our first measurement using the equalized speaker measurement.

So there you have it – two simple methods for measuring microphones that ensure any non-linearities in your speaker don’t affect the measurement. And of course these are some of the most basic microphone measurements that you can do in SoundCheck. We can also measure directional response, acoustic overload point, intermodulation distortion, signal-to-noise ratio, embedded mics, MEMS mics and more. If you have any questions, or would like to see more microphone measurements, please get in touch with us – we’d be happy to demonstrate!

https://www.listeninc.com/wp/media/2025/03/Microphone-Demo-Screen-Thumbnail.png 2160 3840 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-03-24 15:25:052026-08-27 15:11:57Microphone Measurement

Live Curves and Static Curves in SoundCheck

March 18, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Learn how to combine live curves and static curves in SoundCheck for real-time analysis and comparison! This video covers everything from visualizing live FFT data to performing mathematical operations on live curves and static curves, like subtraction and averaging.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Live Curves and Static Curves in SoundCheck

In this video, I’m going to show you some options for plotting different types of curves in SoundCheck. Specifically, I’m going to show you how to combine static and live curves on the same graphs. This is useful for example, for tuning applications or comparing a live curve to a target curve.

Many of the curves we encounter, for example, the fundamental curve, are static.

However, SoundCheck’s multi-instrument spectrum analyzer and the RTA allow us to visualize  live curves which change with time.

You can see here, for example, if I play a sine tone on my signal generator, I can capture it with my microphone and you can see the live FFT curve here. This green dot next to it here in the memory list indicates that it’s a live curve.

You can plot live and static curves separately, or together.

For example, if I want to add the static curve to this graph here with the live curve, all I need to do is drag and drop the fundamental curve from the memory list onto the graph.

Similarly, I can also drag and drop live curves on an existing or a new display.

You can also do calculations involving both static and live curves, including subtraction, addition, and power average, and you can also find maximums and minimums. Here, I’m going to add a new calculation module that subtracts two curves to find the difference between a live measurement and a target curve.

On the RTA, I’ll add a subtraction function, then I’ll select my live curve… and my static curve. Now you can see my graph is showing the original RTA and the memory list static curve. And we also display a new calculated curve which is the difference of the RTA and the static curve.

There are other mathematical operations that can be implemented on static and live curves, for example addition and power average, and these can even be used in test sequences. Check out the SoundCheck manual for more information.

https://www.listeninc.com/wp/media/2025/03/Live-and-Static-Curves-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-03-18 05:00:152026-08-27 14:24:20Live Curves and Static Curves in SoundCheck

Using Accelerometers with SoundCheck

March 4, 2025/in Blog, SoundCheck Tips Videos/by Julius Wijono
Easily measure vibration with accelerometers in SoundCheck! In this quick tip video, we’ll show you how to set up and calibrate an accelerometer for precise vibration measurements.

Additional Resources for SoundCheck

Detailed explanations of how to use SoundCheck can be found in the SoundCheck manual.

Video Transcript: Using Accelerometers with SoundCheck

In this short quick tip video I’ll demonstrate how to use an accelerometer with SoundCheck. This is useful when measuring vibration, not just an acoustic input.

First you need to set your input signal path to accelerometer in the calibration menu and calibrate your input. Accelerometer calibration sequences are built into SoundCheck so it’s simple – just click the calibrate button and it will automatically calibrate your input. I have a B&K 4294 calibrator with a 4534-B-001 accelerometer, which I can select here and then calibrate. 

Now let’s take a look at our accelerometer readings. I still have my accelerometer on the calibrator, so it should show me 10 meters per second squared. 

You can also integrate the input to view velocity rather than acceleration. We just need to check this ‘integrate’ box here, and now it calculates the velocity in meters per second. This is useful if you want to correlate measurements to velocity rather than acceleration, for example, if you are measuring fan noise at different speeds or as a device ramps up.This calibrator outputs 10 milimeters per second, so if I enable this checkbox that’s what we’ll see. 

You can even plot these measurements on a strip chart to see how the velocity is changing over time.

https://www.listeninc.com/wp/media/2025/03/Accelerometers-Blog-TN.png 1080 1080 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-03-04 05:00:522026-08-27 14:08:00Using Accelerometers with SoundCheck

Bluetooth Earbud Test Measurement

January 14, 2025/in Audio Measurement Videos, Blog, Headphone & Headset Videos/by Julius Wijono

How do you measure Bluetooth earbuds? In this short video, we demonstrate how to measure Bluetooth earbuds using SoundCheck. You’ll see how to pair the earbuds, ensure a proper fit for accurate results, and configure SoundCheck for measurements including left and right earphone frequency response, THD, send response of the microphone, and distortion. This method can be used for any Bluetooth audio device, from true wireless earbuds to professional over-ear headphones.

Watch this Video Demo of Bluetooth Acoustic Measurements on Headphones / Earbuds

Learn More about How to Test Earbuds and Bluetooth Audio Measurements

Here are some additional resources:

  • Free Headphone Test Sequences: https://www.listeninc.com/products/test-sequences/free/#headphones

Video Transcript: How to Test Bluetooth Earbuds

 In this short video I’m going to show you how simple it is to measure a pair of Bluetooth earbuds using SoundCheck and our free Bluetooth headphone sequence.

We’re going to use a head and torso simulator for the most realistic representation of how a human would hear. If this is outside your budget , you can use a simpler headphone test fixture or an ear coupler. I’ll use the Portland tool and die Bluetooth interface to pair to the earphones and AudioConnect 2 will connect and power the TEDs microphones inside the ear simulators, as well as the SCM mic that I used to calibrate the mouth simulator.

We’ll measure the left and right earphone frequency response, THD, send response of the microphone, and I’ll also show the difference between Left and Right earphones.

I already have SoundCheck up and running on my laptop, with our standard headphone measurement sequence that you can download from our website.

When I hit start, it asks if I want to pair my Bluetooth headphone… I’ll say ‘yes’ and turn on pairing mode … the white light is flashing …. and the Bluetooth Interface is searching for any devices that are open for pairing. We see the airpod pros here so I just hit OK…and once I’m connected the light turns green to show it’s paired.

Now the sequence is prompting to insert the earphones… I’ll put them in… and it wants  to check the seal. This is important to make sure there is a good fit – you’re going to need that to get good bass output. I’m going to say ‘yes’ and now the sequence is bringing up the signal generator playing pink noise in both ears. We can see the real time analyzer is showing the frequency response of both left and right ear. I have a good seal on my right but not on my left ear so I’ve got to adjust that a little to get a snug fit.

Now that I have a good seal on both ears, I can continue and we’re ready to measure.

We’re using a stepped sine in 12th octave frequency resolution from 20 Hertz to 20 kilohertz and we’ll see the frequency response as well as the diffuse field corrected response, which takes into account the ear simulators’ response on hats.

Here’s our results. We can see the frequency response – the green and red lines for left and right ear, and the diffuse field corrected, the purple line. Ideally this should be more or less flat when we subtract out the ear simulator, so this looks pretty good. 

Down below we see the difference between the left and right ear, the tracking. Ideally this would be zero, but we have a little notch here so there’s a small difference. On the bottom graph we have total harmonic distortion for the left and right ear.

Now it’s asking if I want to measure the microphone response otherwise known as the send response, and I say yes. We’ll hear pink noise played out of the mouth, and we will get the frequency response of the microphone 

So essentially I’m done now and it’s checking if I want to save the results. I also have information about the sensitivity of my earbuds and their microphone. That’s a very basic Bluetooth headphone test – there are many other measurements we can make on headphones and earbuds, and we’ll show you those in another video.

As you can see, measuring Bluetooth earbuds, or any type of Bluetooth headphone, is quick and easy with SoundCheck. If you’d like to give it a try, contact us for a demo!

https://www.listeninc.com/wp/media/2025/01/Earbud-Demo-TN-Final.png 1080 1920 Julius Wijono https://www.listeninc.com/wp/media/logo.png Julius Wijono2025-01-14 13:38:282026-08-28 14:33:08Bluetooth Earbud Test Measurement
Page 4 of 22«‹23456›»

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top