Registration required

The content you have requested is available only to registered visitors. Please complete the short form below (all fields are required).

  • 简体中文 简体中文 Chinese (Simplified) zh-hans
  • English English English en
Listen, Inc.
  • Products
    • AUDIO MEASUREMENT
    • System Overview
      • What Soundcheck Measures
      • SoundCheck for R&D
      • SoundCheck for Production
      • Innovation
    • SoundCheck Software
      • Making Measurements
      • Algorithm Highlights
      • Integration
      • What’s New?
      • Packages, Modules & Pricing
      • Support Contracts
    • Audio Measurement Interfaces
      • AudioConnect 2 (2 channel))
      • AmpConnect 621 (6/2 channels)
      • AudioConnect 8×8 (8 channel)
      • AudioConnect 6×2 (6/2 channel)
      • AmpConnect ISC (2 channel)
      • 3rd Party Audio Interfaces
    • Audio Testing Hardware
      • Microphones & Amplifiers
        • Measurement Microphones
        • Microphone Power
        • Audio Test Amplifier
      • Specialist Test Interfaces
        • Bluetooth Audio Measurement Interfaces
        • MEMS microphone Interfaces
        • DC Connect
      • Audio Test Accessories
        • Turntables
        • Halo Automotive 6-Mic Array
        • Automotive Audio Test Kit
        • The SCC-1 Ear Coupler
        • Other Measurement Transducers
        • Impedance Box
        • Calibrators
    • NOISE & VIBRATION MEASUREMENT
    • System Overview
    • NoiseCheck Software
    • Noise & Vibration Interfaces
    • Noise and Vibration Testing Hardware
  • Applications
    • Headphones & Headsets
    • Loudspeakers & Microspeakers
    • Microphones
    • Automotive
    • Communications
    • Smart Devices
    • Hearing Aids
    • Audio Electronics
  • Support
    • Get Support
    • User Documentation
    • Knowledgebase
    • Training
    • Sequences & Resources
    • Drivers
    • Register Product
    • Report a Bug / Request a Feature
  • Resources
    • ‘Sound Matters’ Blog: Audio Measurement Expertise
    • Test Sequences
    • Article Reprints
    • Published Papers
    • Technical Notes
    • Measurement Services
    • Useful References
  • News & Events
    • News
    • Events
  • About Listen
    • Listen, Inc.
    • Contact
    • Distributors & Reps
    • Careers
    • Privacy Policy
  • Menu Menu

all videos

Customized Units for Specific Applications (100 Things #29)

August 11, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

SoundCheck contains many default units for sound, electrical and vibration measurements, but it also offers customized units for specific applications. Watch this short video to learn more.

Customized Units for Specific Applications in SoundCheck

Learn More About SoundCheck’s Advanced Features

Read on about more measurement features in SoundCheck.

More information is also available in the  SoundCheck Manual.

 

Video Script: Customized Units for Specific Applications

Did you know that in Soundcheck, you can create your own custom units? Although SoundCheck contains many default units for sound, electrical and vibration measurements, you can also customize them for a specific application.

For example, let’s say you want to use a laser vibrometer that measures displacement to measure loudspeaker cone excursion. Simply go into the Calibration Editor, Add a new Input Calibrated Device, then under Sensitivity, click on the Unit button and enter your new unit and dB reference, e.g. meters and dB Ref: 1. Your multimeter and y-axis on your graphs will now read displacement in meters.

Units can also be edited in the sequence in either the analysis or post-processing step by selecting the “Unit” button.

The new units chosen are applied to  the data generated by that step, and preserved for the remainder of the sequence run.

Similarly, custom units can also be applied to curves in the Memory List items by right-clicking and selecting units.For example, if you want to convert dBSPL to dBPa, just change your dB Ref from 20uPa to 1Pa.

This flexibility lets you easily customize SoundCheck for your specific application!

 

 

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_29_thumbnail.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-08-11 12:07:472026-08-26 15:40:53Customized Units for Specific Applications (100 Things #29)

Autosave SoundCheck Data to a Variety of Formats (100 Things #28)

August 4, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

The autosave step in SoundCheck is a powerful feature that allows you to save the curves, values, results and waveforms generated in your audio tests in the format and location of your choice while the sequence is running. Data formats include text, csv, Microsoft Excel, Microsoft Word, Matlab, WAV, TDMS, database as well as the native SoundCheck dat, results and waveform formats.

Autosaving Audio Measurement Results in SoundCheck

Learn How to Autosave Data in SoundCheck

Check out our Autosave Tutorial (section 8).

More information is also available in the  SoundCheck Manual.

 

Video Script: Autosave SoundCheck Data to a Variety of Formats

The ability to automatically save data in a sequence has been a SC feature since it’s inception. No other audio test and measurement system offers the Autosave options and flexibility found in SoundCheck.  SoundCheck can save to a variety of formats including text, csv, Microsoft Excel, Microsoft Word, Matlab, WAV, database as well as the native SoundCheck dat, results and waveform formats.

The ability to save sequence data every time a sequence is run is a clear benefit for the production line test environment.  Curves, values, results and waveforms can be saved for each device under test, preserving the test data for future statistical analysis.

Autosave steps are generally found at the end of a sequence, after all of the data and results have been generated.  Step templates are available for the most common autosave formats.

Here’s the Save to Dat autosave step. At the top, I have the ability to select whether data, results or waveforms are to be auto saved and you can see that as I toggle through these options, the memory items in the list are filtered based upon my selection.  The data to be saved is determined by selecting the desired items in the list using standard click, shift+click, ctrl+click functions.

Once you’ve selected the items to be saved, you can assign the location to where they will be saved. By default, this will be your SC data folder but you can also save to any location on a local or network drive or portable media storage.

Below the folder path control, is the data formatting drop down. Depending on the selected format the various options may or not be available. You can see that as I switched from SC format to Excel that many of the options became active including the options to use an Excel template, Axis selection, Layout, Header configuration and Notation.

Test information is appended to the saved data’s name so If I select Time, the saved data selected above will be appended with a time stamp every time it is saved.

The final configuration is for how the file will be saved and file name construction.  This gives the user options to create overwrite or append data to an existing file when saving and whether this should be an automatic operation or prompt the operator with a file save dialog.  File name construction is done using a template format using default options such as sequence name, time. Serial number as well as a user defined field.

For this example, I’m going to use the default template construction using the sequence name and date.  [close the editor and run the sequence a few times, then open the Excel file to show how the data has been saved.

We can never have enough data no matter if we’re working in R&D or production and the autosave step is a powerful Soundcheck feature that allows you to save the data you want in the format you want and in the location you want.  Future versions of SC will include even more autosave formatting options so stay tuned and thanks for watching!

 

 

 

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_28_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-08-04 12:14:042026-08-24 16:57:23Autosave SoundCheck Data to a Variety of Formats (100 Things #28)

Recall Saved Data While Running A Sequence (100 Things #27)

July 28, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

SoundCheck can recall saved data such as EQ/Weighting  curves, limits, or prior measurements while running a test sequence, and use it within that test sequence. This feature is useful for measurement comparison to golden units, for comparison to repeated test measurements, and much more.

Recalling Saved Data in SoundCheck

Learn How to Recall Saved Data in SoundCheck

Check out our Recall Data Tutorial (section 9).

More information is also available in the  SoundCheck Manual.

 

Video Script: Recall Saved Data while Running a Sequence

Like every other program, SoundCheck allows you to open up previously saved data and run some sort of offline analysis with it. But, have you ever wondered if it is possible to bring in previously saved data into SoundCheck on the fly while running a sequence?

SoundCheck’s sequence editor comes with a ‘Recall’ step that allows you to import any kind of data – Curves, Values, Results, Waveforms, WAV file or even Text files into the memory list while running a sequence and use the imported data in any subsequent steps in the sequence. This is useful for test engineers in a lot of different ways.

Firstly, if you have previously saved data  like EQ/Weighting  curves, limit values of waveforms that you would like to use, you can bring these into a sequence automatically using the ‘Recall step’. The recalled data  will get populated in the memory list when the sequence is run and can be used in any subsequent steps in the sequence. The recall step can be configured to use an absolute path to the recall data, use a relative path using  automatic template naming option or prompt the operator to select the data for recall.

When exporting a sequence that uses a recall step with an absolute path, Soundcheck will automatically copy the recall data to the export folder and convert the recall path from absolute to relative

The recall step can also be useful to reference a previously saved measurement when you are making repeated test runs. Just to give you an example, if you are measuring passive noise cancellation with different headsets, you could measure the unoccluded ear response only once and in the next run, choose to recall the same unoccluded response curve to analyze with a different headset response. On a production line you might want to compare the speaker under test to a recalled reference or “golden unit” for limit comparison

Personally, I find this to be a very useful tool in troubleshooting sequences. When I do not have the hardware connected to take actual measurements, I use the recall step to simulate acquisition and bring in previously-recorded waveforms so that I can debug subsequent analysis or post processing steps in the sequence.

Overall, the ‘Recall’ Step serves as a multi-purpose utility to bring in previously saved data specific to a sequence, facilitate easy sharing of sequences,  save time when dealing with sequences that take repeated measurements and also help with troubleshooting sequences.

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_27_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-07-28 12:45:402026-08-24 16:39:45Recall Saved Data While Running A Sequence (100 Things #27)

Automotive Audio Measurements (Seminar): Frequency Response, Max SPL, Buzz, Squeak & Rattle

July 22, 2022/in Automotive Videos, Blog, Seminar Recordings/by Zarina

In this practical online seminar, Steve Temme demonstrates in-car measurement of frequency response, Max SPL, and Buzz, Squeak and Rattle using a Bluetooth connection. He discusses considerations such as physical setup, infotainment system controls and the measurement parameters. We then discuss connectivity for automotive testing, explaining and demonstrating the various connectivity options including USB drive, Bluetooth and A2B bus. Finally, we take a look at some of the other audio measurements that you can make using SoundCheck, for example active noise cancellation and voice assistance readiness.

Automotive Audio testing demonstrations include:

  • Frequency Response
  • Max SPL and Max SPL Spectrum
  • Buzz, Squeak & Rattle
  • Connectivity Options – USB, Bluetooth, A2B bus
  • ANC and Voice assistance readiness

Presenters: Steve Temme
Duration: 32 Mins

Automotive Audio Measurement Resources

This seminar was originally broadcast on July 21st 2022. The recording below does not include the live Q&A at the end for attendee confidentiality reasons. However, several links to additional resources were provided during the Q&A session, and these are provided below.

  1. Test sequence for in-car audio measurements. This sequence measures the impulsive distortion, frequency response, and maximum sound pressure level of a vehicle.
  2. An article by Steve Temme on automotive Max SPL measurements. Originally published in VoiceCoil magazine, June 2022.
  3. Read the full ISEAT paper, presented by Steve Temme at the 9th ISEAT Conference (2024) Shenzhen, China

More about how to Measure Automotive Audio

Check out our main page on Automotive Audio Testing, which includes links to test sequences, relevant products and more.

Learn more about Connecting to Automotive Infotainment Systems

Maximum SPL measurements in cars

Buzz, Squeak and Rattle measurements

AES Technical Committee on Automotive Audio. Listen, Inc. works closely with this group to ensure that our measurement capabilities align with the measurements recommended by the AES.

More about Standardized Automotive Audio Testing

Check out our latest seminar video where Steve Temme presents the current status of standardized automotive audio measurements. It covers key tests recommended by the AES Technical Committee on Automotive Audio, including frequency response, Max SPL, and impulsive distortion, with real in-car demos. It also explores extended measurements such as THD, IM distortion, and spectral uniformity to give a more complete picture of system performance.

Standardized Automotive Audio Testing Seminar

https://www.listeninc.com/wp/media/2022/07/seminar-thumbnail-1.png 861 1458 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-07-22 17:58:132026-08-27 15:25:50Automotive Audio Measurements (Seminar): Frequency Response, Max SPL, Buzz, Squeak & Rattle

Production Line Polarity Measurement (100 Things #26)

July 21, 2022/in 100 Things Videos, Blog, Headphone & Headset Videos, Loudspeaker Videos/by Zarina

SoundCheck offers a rapid production line polarity measurement that can identify correct wiring at the same time as other production line acoustic tests. This is valuable as the conventional method of polarity measurement –  determining if a diaphragm moves outward or inward when voltage is applied – is not practical on the production line.

Production Line Polarity Measurement in SoundCheck

Learn How to Measure Polarity in SoundCheck

Check out our knowledgebase article on Polarity Measurement.

More information is also available in the  SoundCheck Manual.

 

Video Script: Production Line Polarity Measurement

Having the proper polarity marking or wiring is a critical requirement for any transducer, particularly those that are used in conjunction with others.  If there are errors in wiring or terminal markings, the intended performance of the transducer and how it interacts with other transducers in a system can be compromised.

The simplest test for polarity might be applying a DC voltage to a speaker and determining if its diaphragm moves outward or inward as the voltage is applied.  If everything is wired or marked correctly, we would expect the diaphragm to respond with an outward motion when a positive voltage is applied.  While this method is simple and accurate, it is not practical for production line test.

For production line testing, SoundCheck has a couple of useful methods for polarity detection. The first option is to place limits on the phase response curve of the device under test. Since the phase response changes by 180 degrees when the polarity changes, this can be an accurate method for polarity detection. The other option is to enable the Polarity check box which can be found on the Time tab of most of SC’s analysis editors.  Once enabled, every time the Analysis step is applied, SC will calculate an impulse response of the current measurement. The impulse response is then analyzed to determine if the largest peak has a positive or negative value.  If positive, a value of 1 will be generated into the Memory List, if negative, a value of -1 will be generated into the Memory List. A limit can then be applied to this value to create a Pass/Fail verdict in the ML Results tab.

These polarity detection options have been available in SC since 2011 and provide the user with two accurate methods for measuring the polarity of your transducer.

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_26_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-07-21 13:01:452026-08-24 16:34:34Production Line Polarity Measurement (100 Things #26)

Bluetooth Capability Can Be Added to Any SoundCheck System (100 Things #25)

July 14, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos, Wireless and Bluetooth Videos/by Devin Vaillancourt

Bluetooth capabilities are becoming more and more common in modern devices. Luckily, you can add Bluetooth testing capability to your existing SoundCheck system quickly, and be ready to test without huge hardware investments or learning brand new software. Les demonstrates the hardware and software options available from Listen with some typical Bluetooth test setups.

Bluetooth Capability Can Be Added to Any SoundCheck System

Learn more about Bluetooth testing capabilities in SoundCheck

Check out our full seminar, all about Bluetooth testing in SoundCheck. Les Quindipan of Listen, Inc. and Kristopher Hett of Portland Tool & Die demonstrate Bluetooth testing with a variety devices, test parameters, and testing considerations.

Video Script:

A recurring theme you will hear in this 100 Things Video Series is SoundCheck’s flexibility with a wide range of audio test applications and broad compatibility with acquisition hardware. This architecture dates back SoundCheck’s release in 1995, and makes SoundCheck very adaptable to expanding your existing system for other test applications.

Let’s look at adding Bluetooth testing to an existing SoundCheck system.

Suppose you are currently using SoundCheck for traditional speaker, headphone or headset mic testing. Then, you develop a Bluetooth product. It’s very easy to add Bluetooth testing to your SoundCheck system.

Let’s look at these traditional and BT setups side-by-side.

Here’s a traditional wired speaker test diagram next to a wireless Bluetooth speaker test. Note, the tests are nearly identical, but we simply add a USB connected Bluetooth interface which wireless transmits the test stimulus to the speaker under test.

A Bluetooth headphone/headset test is similar to a speaker test, except the stimulus is transmitted wirelessly to two channels- the L/R sides of the headphone, and the response is acquired through the ear simulators.

We can also test the BT headset mic. In this case, the test stimulus is transmitted to a calibrated mouth simulator, and the response is acquired wireless from the headset microphone for analysis.

We offer two different Bluetooth interfaces. The BTC 4149 here is a fully featured interface designed for R&D use. It can test  both sink, e.g. headphones and source devices, e.g. smartphones, with full control over Bluetooth protocol settings, such as explicit control over codec choice and transmitter power, as well as various pairing options. We also have a lower cost option, the BQC 4149, for production applications. This one tests Bluetooth Sink devices only, and offers only the standard aptX, CVSD and mSBC, along with more limited control of Bluetooth parameters. Both these devices use the same chip set, so tests can be seamlessly transferred from one device to the other as they move from engineering to production

The advantage of SoundCheck’s modular architecture is that:

1) Adding wireless Bluetooth testing is an incremental upgrade to your existing SoundCheck system. In other words, you don’t have to invest in an entirely new hardware and software to add Bluetooth testing.

2) Testing wireless Bluetooth remains in a SoundCheck environment, which you are already familiar with.

3) If you are scaling for production, you can spec a lower cost BQC-4149 interface for your production systems.

https://www.listeninc.com/wp/media/2023/10/100-things-25-thumbnail.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2022-07-14 08:30:122026-08-24 16:27:15Bluetooth Capability Can Be Added to Any SoundCheck System (100 Things #25)

ePRB (Perceptual Rub & Buzz Measurements) (100 Things #24)

July 4, 2022/in 100 Things Videos, Algorithm Videos, Blog/by Devin Vaillancourt

Not all distortion is audible. Perceptual Rub & Buzz measurements identify only those devices with audible Rub & Buzz defects, rather than all Rub & Buzz defects. Basing end-of-line pass/fail decisions on this metric increases yield while maintaining customer satisfaction.

ePRB (Perceptual Rub & Buzz Measurements)

Learn more about enhanced Perceptual Rub & Buzz

Our full ePRB launch seminar goes in-depth with algorithm explanation, testing demonstrations, use cases, and more.

For all things Enhanced Perceptual Rub & Buzz including listening examples, published articles, and a sequence to try ePRB for yourself, check out our Enhanced Perceptual Rub & Buzz page.

Video Script:

While conventional Rub & Buzz measurements identify faulty products and provide valuable information about the health of your production line, they can sometimes result in devices with inaudible distortion artifacts being rejected. To maximize yields, perceptual distortion metrics enable the rejection of only devices that actually sound bad.

SoundCheck is the only audio test system with a  perceptual Rub & Buzz metric that offers excellent correlation with subjective perception and sufficient noise immunity for production line use. 

We led the way with research in this area here at Listen. In 2011, we launched the first Rub & Buzz algorithm built on a model of human hearing . This original model was well received due to its excellent correlation with subjective listening tests. However, like the human ear, performance was less repeatable in the presence of background noise. Many hours of original research over the past few years have resulted in our new Enhanced Perceptual Rub & Buzz algorithm. This  combines our original methods with proprietary noise suppression and a refined perceptual model to exceed the performance of the human ear. In other words, it replicates the hearing characteristics of a human ear in a quiet environment, even in the presence of background noise.

This means that it offers the excellent noise immunity needed for a wide range of manufacturing environments.

Let me show you what I mean.

These graphs show 3 speakers, a good, bad and borderline loudspeaker, each measured 10 times using 3 different perceptual Rub & Buzz algorithms; our original 2011 version, our new ePRB algorithm, and a perceptual algorithm from another audio measurement company. You can see that while all three indicate the relative magnitude of the distortion, in both our original algorithm and the ‘other’ algorithm, the variation in the repeated measurements for each speaker is inconsistent enough that it would be problematic on the production line. Our new algorithm, the middle graph, clearly shows much greater repeatability between measurements. This offers a high level of confidence in the results and makes it easier to set limits.

Correlation to subjective tests is also improved through the use of more comprehensive masking curves that include additional factors to more  accurately replicate the human ear’s behavior and reveal increased detail in the ear’s highly sensitive 500Hz – 2kHz range. 

Perceptual distortion metrics are a valuable end-of-line test addition as they  increase yield by passing products with inaudible distortion. That said, in most cases, it is desirable to also measure normalized Rub & Buzz and Loose particles, as these are convenient ways of monitoring your production line for early warning of any problems that could eventually lead to a returned product from a customer.

All three distortion measurements, along with a whole host of other end-of-line parameters can be made in SoundCheck simultaneously, using the same stepped sine sweep stimulus signal. In other words, there is no increase in test time when you add perceptual metrics to your end-of-line test. Check out our website for more detailed information, demo sequences to try this out, and more.

https://www.listeninc.com/wp/media/2023/10/100-things-24-thumbnail.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2022-07-04 08:30:162026-08-21 13:04:58ePRB (Perceptual Rub & Buzz Measurements) (100 Things #24)

Simultaneously Analyze Analog and Digital Signals (100 Things #23)

June 30, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos 100 things 23, A2B, analog, analog and digital signals, analog signals, Bluetooth, digital, digital signals, simulataneously analzye analog and digital, simultaneously analyze analog and digital signals, USB/by Zarina

SoundCheck works with both analog and digital hardware, even both at the same time! This makes it easy to simultaneously analyze analog and digital signals for measuring devices ranging from basic analog speakers to the latest Bluetooth devices, USB devices, A2B devices, and more. Even differences in sample rates and internal clocks can be accounted for. No matter your specific hardware requirements, SoundCheck offers the hardware calibration and measurement accuracy you need.

Simultaneously Analyze Analog and Digital Signals in SoundCheck

Learn More About Measuring Mixed Analog and Digital signals

Check out our video demonstrating testing via an A2B Interface.

Check out our video demonstrating Bluetooth testing.

Check out our video demonstrating USB Headset measurement.

More information is also available in the  SoundCheck Manual.

 

Video Script: Simultaneously Analyze Analog and Digital Signals in SoundCheck

Since its 1995 launch, SoundCheck has supported  audio drivers in multiple formats. Today, SoundCheck uses WDM/MME, ASIO, WASAPI and NiDAQmx on Windows and CoreAudio on MacOS. This enables SoundCheck to operate with a wide range of audio hardware including Listen interfaces, 3rd party hardware and in some cases, direct connection to your device under test. It also means that SoundCheck easily supports a wide range of test applications including those that require mixed analog and digital signals. Let’s look at a few examples:

For testing Bluetooth devices such as speakers and headsets, a Bluetooth interface is configured to wirelessly transmit/receive signal from the device under test.

For the speaker or headphone test, the Bluetooth stimulus is digital and the response via the reference microphone or ear simulators is analog.

For the headset microphone test, the test stimulus through the mouth simulator is analog, and Bluetooth response is digital.

For a MEMS digital microphone test, the test stimulus to the reference speaker is analog, the captured response is digital

For an A2B digital microphone test, the test stimulus to the reference speaker is analog, the captured response via the A2B is digital

In some cases, like a USB audio headset, microphone or speaker, the device under test can even be directly connected via USB to the PC, and digital signal can be passed to/from SoundCheck. The possibilities are endless!

Here is SoundCheck’s hardware setup window. Any audio device with a supported audio driver can be configured in SoundCheck. In this hardware setup, I have an AmpConnect 621, a BQC Bluetooth interface and a USB headset. Not only can I easily configure different hardware, but note, analog hardware and digital hardware can peacefully coexist.

Post-processing steps such as resample and frequency shift convert the recorded response’s sampling rate and phase to match the stimulus prior to analysis. Hardware with different sampling rates and even different internal clock crystals can even be managed! Setting up mixed signal hardware is not only easy, but with post-processing we can be confident in our measurement results across analog and digital hardware. As new devices drive the use of additional hardware, SoundCheck can adapt, making your testing possibilities endless.

 

 

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_23_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-06-30 13:12:472026-08-24 16:29:37Simultaneously Analyze Analog and Digital Signals (100 Things #23)

Easily Share SoundCheck Sequences (100 Things #22)

June 23, 2022/in 100 Things Videos, Blog, SoundCheck Functionality Videos/by Zarina

Its easy to share SoundCheck Sequences for collaboration with colleagues and contract manufacturers. Sequence files, and even entire sequence suites with dependent stimulus files, limits, and recall data can be sent via email or transferred via USB or the cloud.

Easily Share SoundCheck Sequences

Learn More About Sharing SoundCheck Sequences

More information is also available in the  SoundCheck Manual.

 

Video Script: Share SoundCheck Sequences

Did you know it’s really easy to share SoundCheck sequences with colleagues and partners?

There are a couple of different ways of doing this. If the person you need to send it to has the same files as you, you can simply email the sequence.

Sometimes it’s more complicated than that. You may, for example, need to send a vendor a sequence that uses dependent files such as custom stimuli or reference curves. That’s also easy using the exporting function.

This creates a single folder that collects together all of the data the recipient needs to run the sequence, wherever those individual files are on your computer. The absolute file paths to locations on your machine are automatically changed into relative file paths to the folder containing the sequence.

Now when your recipient receives the folder – either via email or from a shared network drive, they can open it up in SoundCheck and run it directly.  It doesn’t get much simpler than that!

This is just one of the ways SoundCheck simplifies audio measurement collaboration. Keep watching for more!

 

 

https://www.listeninc.com/wp/media/2023/11/100_things_22_thumbnail.png.png 1080 1920 Zarina https://www.listeninc.com/wp/media/logo.png Zarina2022-06-23 13:34:242026-08-26 15:41:28Easily Share SoundCheck Sequences (100 Things #22)

100 Things #21: Normalized Rub & Buzz Measurements

June 16, 2022/in 100 Things Videos, Algorithm Videos, Blog/by Devin Vaillancourt

In this short video, Steve Temme explains how SoundCheck’s unique normalized Rub & Buzz measurement method offers greater accuracy, high speed, and excellent noise immunity for production line testing. Additionally, analysis of each harmonic separately yields valuable information to help identify the exact production line fault.

Normalized Rub & Buzz Measurements

Learn more about normalized rub & buzz measurements

This technical note on Harmonic Distortion Measurement, authored by Listen president Steve Temme, explains the relationships between sampling rate, stimulus frequency and measured harmonics for both normalized and conventional harmonic distortion measurements.

Video Script:

Higher order harmonic distortion is an important production line measurement for identifying Rub & Buzz defects introduced in the manufacturing process. SoundCheck uses unique algorithms for measuring Rub & Buzz distortion and  ‘Normalized Rub & Buzz.’  Let’s look at how these differ from conventional methods.

There are 2 commonly used methods for measuring Rub & Buzz. The ‘tracking high pass filter’ method uses a high pass filter to remove the lower harmonics and sums the remainder. This combines all the harmonics plus transient distortion caused by loose particles into a single metric. While this gives an overall indication of distortion level, it reveals nothing about the cause of the distortion. It is also susceptible to background noise, which can result in false rejects on the production line.

A more accurate, but slower method, sequentially measures individual harmonics using a tracking filter that moves from one harmonic to  the next. While this provides accurate and detailed information on each harmonic, it is not fast enough to use on automated production lines.

SoundCheck’s unique Rub & Buzz distortion methods, which date back to the mid 1990s,  offer more accurate measurements, high speed and excellent noise immunity for production line testing. Furthermore, they analyze each harmonic separately which provides a wealth of additional information to help identify the exact production line fault

Let’s take a look at the unique features that make up the SoundCheck algorithms. 

Firstly, our proprietary Harmonictrak algorithm applies advanced filtering techniques to exclude the noise between the harmonics. All the harmonics are measured discretely and simultaneously. This is extremely fast compared to other methods, and also highly immune to background noise. Furthermore, because it measures each harmonic separately, it provides valuable information about the precise reason that the device failed the test. For example, high levels of harmonic distortion in the 10-15th order range usually indicate a rubbing voice coil, whereas distortion at the 50th harmonic and above is frequently caused by vibrating voice coil lead wires hitting the cone. 

SoundCheck also offers an enhanced version of this called Normalized Rub & Buzz. In this version, we compare the harmonic levels to the fundamental level at their measured frequency before their ratio is plotted, rather than the fundamental level at the excitation frequency. This is more accurate, because it removes the effect of the non-flat frequency response from the distortion. This makes it easier to see the peaks in the distortion response independent of the peaks and dips in the fundamental response, and easier to set limits.

Both these measurement options can use a stepped sine wave test stimulus, so they can be measured simultaneously with other end-of-line parameters such as frequency response, THD and even perceptual Rub & Buzz. While the main objective of Rub & Buzz detection is to identify faulty-sounding speakers, the individual harmonic analysis offered by SoundCheck’s algorithms makes them also valuable for continually monitoring production line performance for any drift in characteristics that could lead to product failure with customers.

Although these methods are now 25 years old, they still out-perform all other methods for measuring higher order harmonic distortion on the production line. More details on these unique algorithms can be found in the published papers section of Listen’s website.

https://www.listeninc.com/wp/media/2023/10/100-things-21-thumbnail.png 1080 1920 Devin Vaillancourt https://www.listeninc.com/wp/media/logo.png Devin Vaillancourt2022-06-16 08:30:412026-08-21 13:06:28100 Things #21: Normalized Rub & Buzz Measurements
Page 16 of 22«‹1415161718›»

Audio Measurement Expertise


How Changing Industry Needs are Shaping Audio Test and Measurement

Smarter SoundCheck Sequences with Loops and Logic

Audio Basics: Polarity

How to Measure: Haptics

The Value of Big Data

Audio Basics: Phase Response

view all

Latest News


2026 End Of Year Promotions

Celebrating 30 years: Listening – The Secret Of Our Success

Automotive Test Sequence Including BSR, Max SPL and Frequency Response

Listen Introduces AudioConnect 2, a New Portable Dual-Channel Audio Interface

SoundCheck 21 Brings Enhanced Loose Particle Detection, Multichannel FFT, Metadata, Sequence Protection and more


Audio Measurement Expertise – Delivered Monthly

 

ABOUT LISTEN INC

Listen is a global leader in audio measurement and analysis, with over 30 years’ experience developing innovative test methods and algorithms. SoundCheck, our powerful software-based audio analyzer, pairs with our test interfaces, precision microphones, and accessories to offer a complete solution for testing loudspeakers, headphones, microphones, smart devices, communication systems, hearing aids, automotive audio, and more. Trusted by engineers worldwide, Listen delivers the accuracy and flexibility essential for modern audio testing, from the R&D lab to the production line.

PRODUCTS
APPLICATIONS
SUPPORT
RESOURCES
NEWS & EVENTS
ABOUT

CONNECT

YouTube
LinkedIn
LinkedIn
Share
Instagram

Copyright © Listen, Inc.   |   Privacy Policy   |   AI Disclosure
  • Instagram
  • LinkedIn
  • Youtube
  • Mail
Scroll to top